Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Replaces the foot pad for your Lippert 3,500-lb power tongue jack (LC285318).
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
What's up everybody It's AJ with etrailer.com. Today, we're gonna be checking out this Lippert Foot Plate for electric jack. So it's gonna be 5 1/2 inches in diameter. So it's gonna give you a good footprint when you go lower your jack down. That way it gets a good grip on the ground and stays put. Let's check it out.
Now coming down here to the bottom of the jack we already had removed it, cuz we we're pulling it around. You don't wanna drive around with one of the foot plates on there. That's how you're gonna lose one. So we're gonna easily replace the old one. It was kinda worn out and it wasn't doing us much good.
We had issues with sinking in the gravel and this is gonna help us out with that 5 1/2 inches. It's gonna give us more of that footprint, for it's more spread out and more stable. It's really easy to replace. Now it doesn't come with a pin or clip and see I have these right here. You have to get those separately or use 'em from your old one.
Just put that in there. Line up with that hole. It does fit a two inch diameter inner tube. So you can see it goes on there. It fits pretty snug, but it's easy to move around.
I just gotta line up the hole. There we go. And on the back side I just put the cotter pin. Now let's go ahead and lower it down. We had to put it up on jacks just to get this up to put that new foot plate on there. You could have it hooked up to your vehicle and do it that way too. We'll lower it down. Now we did make sure that the foot plate can handle 3,500 pounds. That's it's weight rating which matches our trailer. Something to compare it to is, you know, we got the rounded circle one here. We have one that's more of a rectangle shape. This is a Bulldog Detachable Foot Plate for also two inch inner diameter tubes. This one comes with a pin and clip. So that's nice that it has that in there. And this one has just a slightly different design, the rectangle, which is meant to spread out that footprint. So as it comes down, you know, on here on our circle one it's going down to one little spot. So if you are on gravel or maybe uneven terrain, maybe mud it could be sinking in just a little bit. This will spread it out in more of a rectangle so it can get more of a whole. It covers more ground that way. It's a little more spread out and evenly distributes that weight Overall, think this'll be a great addition to your jack, specially to get that footprint and get that grip you wanted. And if you're replacing an old one that's worn out or maybe you never had one on your jack, this can easily be added on there and be very useful. Just remember, don't drive around with it on there. Recommended that you detach it when you are hooked up to a vehicle. That way you don't lose it when you're going down the road. Well, I think that does it. Thanks for hanging out and I hope this helped..
Average Customer Rating: 4.8 out of 5 stars (48 Customer Reviews)
Replaces the foot pad for your Lippert 3,500-lb power tongue jack (LC285318).Fit perfectly, east to apply and works fine today.
It was a piece of cake to put on took me three minutes and they fit and looks good thank you
Exactly what I ordered
We ordered a replacement jack foot for the electric jack on our camper trailer as the original was lost when we removed it to get more ground clearance on the jack foot while traveling. When we ordered, the photo online showed the jack foot with the pin and cotter key needed. etrailer shipped the correct foot but did not include the pin and cotter key so we could not use the jack foot until we got the pin and cotter key. We called etrailer and spoke to Maiyain customer service. She was very helpful and called the manufacturer and they said they would ship the pin and cotter key dirrectly to us at no charge and it should be here in about 3 days. Actually it took until the seventh day to get here, but that was not the fault of customer service.
We would have given the company a rating of excellent had the pin and cotter key been included in the first place (and Miaya in customer service deserves an excellent rating), but becasue it was necesssary to call customer service to get what should have been shipped with the foot to start, and because we had to wait another 7 days to get the pin and cotter key, we feel overall, etrailer does not deserve an excellent rating on this transaction.
Thank you for for having an alternative site to buy replacement parts. The trailer manufactureres charge a ridiculously high amount!
The instructions on etrailer about how to measure to get the correct size are very detailed, and the pad we ordered fits perfectly.
Received in a timely manner. The jack foot fit perfectly. The pin for said foot is too short, doesn't go all way through so no way to lock in is why 3 stars. Now I have to find a correct size and run the jack up and start over. Much nicer to have all the correct parts so you only have to do job once.
As has always been my experience with etrailer; this item was exactly as described and works as expected.
This product fit our trailer's power jack on our Gulf Stream Vintage Cruiser perfectly. We did order a pin to go with it--which is essential. Thanks!
I ordered the same part as the manufacturer’s page, but saved money thru etrailer for shipping!
Service has always been excellent.
This product showed a pin & clip in the picture, & it was not shipped.
Exactly what I needed. Exactly what I received.
Carey
4/10/2022
Exact replacement and works perfectly.
Etrailer had just what I was looking for. Easy to order. Delivered in promised time. I would do business with them again.
Perfect fit. Great purchase.
Order was delivered fast. Only wish it came with a new bolts to hook it
With .
Sturdy, no corrosion after 1 year of outdoor use and storage
A perfect replacement! Works great.
Package arrived extremely quick, wouldn't order trailer parts from any other company.
Nice heavy Guage pad.
Solid product. Excellent service.
Michael K.
3/27/2018
Works as advertised
Exactly what we needed! It will work perfect for our trailer!
Great OEM replacement.
Not too much to say about an item like this other than it is just as advertised. Good quality!
Great quality. Just as described. Perfect fit.
Item was what we needed , several weeks to get it wasn't worth the wait.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Glenn D.
10/26/2020
Works fine.