Solera 66-1/8" Pitched Awning Support Arm, Black

See what our Experts say about this Lippert Accessories and Parts

Measuring a Solera A...

What Causes Lippert ...

Replacement Pitch Ar...

How to Choose Correc...

Replacement Pitch Ar...

Replacement Pitch Ar...

Replacement Pitch Ar...

Available Replacemen...

Matching Up A Replac...

Recommended Replacem...

How to Pick Out Corr...

What to Measure For ...

• Measuring a Solera Awning Wall-Mount Extrusion for a Replacement Support Arm
  The wall-mounted extrusion in terms of an awning would be the part that attaches to the side of the trailer. I have included a picture pointing out one of these arms on a trailer. Short styles will measure 61-1/2", pitched styles will measure 66-1/8" and flat styles will measure 69".
  view full answer...
  
• Availability of Replacement Arms for Solera Awnings on RV
  We have several replacement arms available. Some powered and some manual. I'd need to know the length of what you have to know for certain which would be the correct size. In the meantime I attached a link that has all of the arms we offer.
  view full answer...
• Is Solera 66-1/8" Pitched Awning Support Arm # LC266169 Sold in Pairs or Individually
  The Solera 66-1/8" Pitched Awning Support Arm # LC266169 that you referenced is sold individually. If you need a pair to replace both of your damaged arms you'd need to order a quantity of two of these.
  view full answer...
• How Are Replacement Support Arms for Powered Solera Pitched Awnings Available
  We do have the support arm available, but the portion of the arm that goes into the motor is not available by itself from Solera. We only have the full assembly support arm available. The Solera 66-1/8" Pitched Awning Support Arm # LC266169 would be the correct arm for a Solera Pitched assembly. This is for 1 arm. If you needed to replace both, you would need two.
  view full answer...
• Replacement Awning Support Arm For 2016 forest River Surveyor With Carefree Awning
  The replacement arm for your Carefree awning is the Solera 66-1/8" Pitched Awning Support Arm, Black, part # LC266169. I have included a video demo below.
  view full answer...
• What Causes Lippert Solera Awning Arm to Become Bent
  There are a handful of reasons why the arm on your Lippert Solera awning might be bent; it could be a part (like the shock), sudden gusts of wind, too much weight from rain, or even something getting stuck in the track while you're retracting it. The last problem seemed to be the most common when I was looking at forums online. Lippert has complete replacement awning support arms like the Solera 66-1/8" Pitched Awning Support Arm, Black # LC266169 that will remedy the problem if you get...
  view full answer...
  
• Replacement Pitch Arm for Solera Awning on 2020 Grand Design Reflection 312BHTS
  We have replacement pitch arms for your awning with the part # LC266169 which fits either side of the awning. This would exactly what you'd need to get going!
  view full answer...
  
• Troubleshooting Arm Popping Out on Solera Power Awning
  According to Lippert, Solera XL Power Awning Support Arms like the # LC362243 may not always sit flush against the sidewall depending on the construction. This is more common with stick and tin RV construction but can also happen with laminated fiberglass. Unfortunately there is no fix for this. Since it sounds like you replaced some parts and this was not a problem before, I would recommend double checking the installation and alignment again. I would also make sure there is not too...
  view full answer...
• Replacement Strut for Solera Power Awning
  Sounds like you are looking for a replacement strut for your Solera awning which would be the part # LC280343.
  view full answer...
• Replacement For Pitched Awning Support Arm on Solera Awning
  We have replacement support arms for your Solera pitched awning, though the small arm by itself is not available separately from Solera; they only have the full support arm assembly available. For your pitched awning the correct part is the following, depending on the color you need: - White: Solera 66-1/8" Pitched Awning Support Arm # LC260294 - Black: Solera 66-1/8" Pitched Awning Support Arm # LC266169
  view full answer...
• Replacement Pitch Arm and Endcap for Solera RV Awning
  The Solera Replacement Pitch Arm # LC266169 that you referenced is sold individually. For a black replacement end cap you'd then need the part # LC423751. For powered awnings there's normally a powered head and an idler head.
  view full answer...
• How to Choose Correct Replacement Solera Awning Support Arms
  While we don't have a way of knowing what awning you have, I can tell you how to choose the right replacement support arms, so long as your awning is a Solera awning. To do so, all you have to do is measure the length of the wall mount, which will tell you the correct size for the arm assembly. - 66-1/8 Inches: Solera 66-1/8" Pitched Awning Support Arm # LC266169 - 69 Inches: Solera 69" Standard Flat Awning Support Arm # LC281154
  view full answer...
  
• Replacement Pitch Arm Assembly for 63 inch Flat Awning Solera
  For your Lippert 63 inch flat pitch arm assembly the correct replacement is the part # LC67VR.
  view full answer...
  
• Available Replacement Arms for Solera Awning
  There is a solution for you, though the upper pitch arm you referenced is not available as an individual piece. It will come with a support arm assembly, and the one you need is going to depend on the length of the wall-mount extrusion from top to bottom. The short style measures 61-1/2" and uses # LC295743, the pitched style measures 66-1/8" and uses # LC266169, while the flat style will measure 69" and use # LC281154.
  view full answer...
  
• Replacement Awning Arm For A 2018 StarCraft Autumn Ridge Outfitter
  The 69" is the length of the Solera Standard Flat Awning Support Arm Item # LC281154. There is no way for me to tell what you have on your 2018 StarCraft Autumn Ridge. You would need to measure the arm you have. Short styles will measure 61-1/2", pitched styles will measure 66-1/8" and flat styles will measure 69". Solera 66-1/8" Pitched Awning Support Arm, Black Item # LC266169 Solera 61" Short Awning Support Arm, Black Item # LC295743
  view full answer...
• Can Solera 66-1/8 Pitched Awning Support Arm be Used to Replace 69" Arm
  If you used shorter arms then you wouldn't be able to extend your awning out completely. We actually have the Solera Universal Awning Support Arms for RVs # LC434727 which are 69" long and if you are only needing only arm you can use part # LC281154 instead. I don't recommend using 2 different length arms for your awning.
  view full answer...
• What to Measure When Selecting Replacement Awning Support Arm
  The instructions on what to measure are a bit confusing: "measure the length of the wall-mount extrusion from top to bottom." What that means is you will measure the length of the part that mounts to the wall of the camper as opposed to the arm itself. The short style measures 61-1/2" and uses # LC295743, the pitched style measures 66-1/8" and uses # LC266169, while the flat style will measure 69" and use # LC281154. I have added links to video reviews for you as well.
  view full answer...
• Is The Inner Arm Available As A Replacement Part For Lippert Solera Awning?
  The inner arm for your Lippert Solera Awning is not available for replacement, so to replace your inner arm you'd have to purchase the entire assembly. We have plenty of options for you to check out and may work great for you. If you have short style arms, then you can use the Replacement Short Arm Assembly for RV Awnings # LC404523, If you have pitched style arms, then you can use the Solera 66-1/8" Pitched Awning Support Arm, Black # LC266169, Or If you have standard arms, then...
  view full answer...
• Matching Up A Replacement Pitch Arm For Solera Awning
  You will want to measure the length of your current Solera awning pitch arms and match up the correct size on the link I attached for you. Based on the photo you attached, you will likely need one of the following sizes: -Replacement Pitch Arm Assembly for Solera XL 63" Flat Awning Support Arm - Black # LC67VR -Solera 66-1/8" Pitched Awning Support Arm, Black # LC266169 -Replacement Pitch Arm Assembly for Solera 69" Standard Flat Awning Support Arm - Black # LC375994 If you can't find...
  view full answer...
  
• Recommended Replacement Arm For Solera RV Awning
  The replacement arms we offer for RV Awnings are designed to fit the Solera awnings. Finding the correct arm depends on the measurement of the wall-mount extrusion from top to bottom. I have attached a link to the product page on our website you can check out. We offer three different Black awning arms replacements. If you have the Solera Awning and need the shorter 61-inch arm you can order part # LC295743. If you have the standard flat awning you can order the 69-inch arm, part # LC281154....
  view full answer...
  
• Troubleshooting Powered Awning That Trips Circuit Breaker When Retracting
  If your powered awning trips the breaker on its motor circuit you might have a mechanical issue that is stopping the awning arms from retracting or the breaker on that circuit may not be the correct value. The motors in items like jacks and awnings will draw more power when they see a heavier load or a mechanical obstruction. You'll want to check the operation of the awning manually using the crank; this may help you determine where the problem is. The awning motor should have some indication...
  view full answer...
• Which is Correct Gas Strut for Solera Awning
  The correct gas strut for your powered or manual Solera awning will simply depend on which Solera awning arm assembly you have. If you have a Solera Short or Flat awning arm assembly (which will use something like the Solera Short Awning Support Arm # LC295743 or Flat Awning Support Arm # LC281154) you will need the Solera Gas Strut 26", 124 lbs for Short and Flat Awning Arms # LC280343. For pitched awning arms such as Solera 66-1/8" Pitched Awning Support Arm # LC266169 you need the...
  view full answer...
• Replacement Gas Strut for Solera Awning
  The frame length of your Solera awning won't matter as much as the type of awning arm that you've got will. If you have a Solera Short or Flat awning arm assembly (which will use something like the Solera Short Awning Support Arm # LC295743 or Flat Awning Support Arm # LC281154) you will need the Solera Gas Strut 26", 124 lbs for Short and Flat Awning Arms # LC280343. For pitched awning arms such as Solera 66-1/8" Pitched Awning Support Arm # LC266169 you need the Solera Gas Strut 24",...
  view full answer...
• Recommended Support Arms And Mounts For Trailer Awning
  For your awning support brackets on your 2005 Dutchman Toy Hauler, I recommend the Solera 66-1/8" Pitched Awning Support Arm, White # LC260294 or black # LC266169. If you have a flat awning, I recommend the Solera 69" Standard Flat Awning Support Arm, White # LC281152 or black # LC281154. If you need the crank heads as well, I recommend the Solera Manual Hardware Kit for Pitched Awnings (66-1/8" Arms) White # LC351826 or the Solera Manual Hardware Kit for Flat Awnings (69" Arms) White...
  view full answer...

Do you have a question about this Accessories and Part?