Solera Classic Universal Awning Support Arms for RVs - 68" to 81" Arms - White

See what our Experts say about this Lippert Accessories and Parts

Replacement Support ...

• What Does the Solera Classic Universal Awning Support Arms Come With
  The Solera Classic Universal Awning Support Arms part # LC434718 come with everything shown in the photos on our product page including support arms, torsion springs, and hardware. The only thing that would be needed for a complete awning is the roller tube and fabric.
  view full answer...
• Replacement Arm Kit for Dometic RV Awning
  To replace the Dometic awning support arms on your RV we have the Solera kit part # LC434718 that you referenced which will work great. This comes with everything you'd need as well. We do not have just the Dometic part numbers you mentioned though.
  view full answer...
• Availability of 19 Foot Long RV Awning
  In the 19 foot length awning option we have only a powered awning with the Solera 12V XL Power Awning part # LCV000335007-362241 which has a fade from white to black. We don't have an option that is solid white.
  view full answer...
• Is Distance Range of Solera Awning part # LC434718 When Extended or Stored
  The Solera Awning part # LC434718 that you referenced has varying lengths between 68 and 81 inches which allows for varying pitch options which is when the awning is open. I don't see how this would cause you to lose ground clearance.
  view full answer...
• Is Replacement Cast Piece With Rivet Available for Lippert Classic Awning
  The only parts that are replaceable for the Solera Classic Awnings are the gas struts and the support arms per my contact at Lippert. If you need something other than either of those parts then you'll need to replace the entire awning arm. Attached are links to our selections of replacement arms and struts for you to check out. If you'll be swapping out the arms make sure you choose replacements that are the same length as your current awning arms.
  view full answer...
• Bottom Bracket Compatibility of the Solera Classic Universal Awning Support Arms
  Looking at the bottom foot of the Solera Classic Universal Awning Support Arms item # LC434718, I can say the mounting pattern is different but the latch looks identical. You may not even have to remove the bottom foot. I am not sure I have ever seen a stand off spacer on a Dometic Awning but would love to take a look at it if you would like to email me back a picture.
  view full answer...
• Replacing Support Arm for Dometic Awning
  Based on my research the 3310766.113P part number you mentioned is for a Dometic awning replacement arm assembly, which you are correct is no longer available. What we do have though is the Solera Classic Universal Awning Support Arms # LC434720 for 81 to 96 inch arms or # LC434718 for 68 to 81 inch arms. These universal support arms are designed to replace existing arms that are used for a Dometic awning. You can use the kit to replace both arms on your existing system.
  view full answer...
• Replacement Arms for Dometic Power Awning
  For your Dometic awning we have the Solera Classic Universal Awning Support Arms in White # LC434718 or Black # LC434717 that should work great as replacements. These are designed for Dometic systems like yours and they do not include a motor. I do just recommend measuring the length of your existing arms to make sure they match. These units measure 68 to 81 inches long.
  view full answer...
• Replacement for Dometic Manual Awning Arm
  The best option we have to replace an old Dometic awning arm is with the Solera Classic Universal Awning Support Arms part # LC434716 for 63"-68" or part # LC434718 for 68"-81". This is a universal kit that will allow you to keep your old fabric and roller all while upgrading to a new set of manual arms.
  view full answer...
• Is 68 to 81 Inches the Range of Arms That Solera Classic Universal Awning Support Arms Replace
  The arm length of 68 inches to 81 inches is the range that the Solera Classic Universal Awning Support Arms will replace. So if you have a spring-loaded manual awning with arms that are between 68 inches and 81 inches long, you can use these support arms as replacements. They come in either black or white. - Black: Solera Classic Universal Awning Support Arms for RVs - 68" to 81" Arms # LC434717 - White: Solera Classic Universal Awning Support Arms for RVs - 68" to 81" Arms # LC434718
  view full answer...
• How To Convert Dometic Power Awning to Manual
  In order to convert a Dometic power awning to manual you would need a new set of arms, the Solera Classic Universal Awning Support Arms for RVs part # LC434718 will work well for this. All you would need to do is remove the old roll tube and fabric from the awning you have now and install it on the above once mounted on the trailer. If you prefer black we have this as well as part # LC434717. In regards to mounting the new arms, you may need to drill a few new holes but this is unavoidable...
  view full answer...
• Replacement Awning Arms for Dometic Awning
  For Lippert awning arms that will work with your manual Dometic awning we have the Solera Classic Universal Awning Support Arms for RVs # LC434718. These will work for you if you have 68"-81" of height between the top awning rail and the bottom of the bracket. We also have the Solera Classic Universal Awning Support Arms for RVs # LC434718. These are designed to replace support arms that measure 81"-96". If you have an arm length of 63"-68" then the arms you would need are the # LC434716.
  view full answer...
• How to Determine the Correct Replacement Awning Arms for a Dometic Sunchaser 8300 Awning
  The correct replacement option depends on the length of the arms that you are replacing. The arm length of 68 inches to 81 inches is the range that the Solera Classic Universal Awning Support Arms will replace. So if you have a spring-loaded manual awning with arms that are between 68 inches and 81 inches long, you can use the Solera Classic Universal Awning Support Arms # LC434718. If you have a spring-loaded manual awning with arms that are between 81" to 96" then you would want to use...
  view full answer...
• Will A Solera Awning Head Work With Carefree Awning Arms
  I do have an option for you but you can't use a Solera Awning Head with Carefree Awning Arms. The arms and head must both match but you can use a Solera Awning Head/Arms with a Carefree Awning Roller Tube/Fabric. For this, the Solera Classic Universal Awning Support Arms part # LC434716 (63"-68" Long Arms), part # LC434718 (68"-81" Long Arms), or part # LC434720 (81"-96" Long Arms) will be a direct replacement. I really wish it was just as easy as replacing the head but you will need...
  view full answer...
• Dometic Awning Replacement Arm Solutions
  We have universal support arms for awnings that do fit the Dometic awnings like what you have. For example, we have the part # LC434720 for arms that are between 81 and 96 inches, part # LC434718 which can be between 68 and 81 inches in length, and part # LC434718 which are for replacements between 63 and 68 inches in length. You'll want to measure the length of what you have now and then pick the correct replacements. The mounting hardware comes with the sets as well.
  view full answer...
• Replacement Awning Arms For Dometic Manual Operating Awing
  The Solera Classic Universal Awning Support Arms # LC434720 is designed to replace the arms and springs on your manual Dometic awning. You must have between 81"-96" in height between the top awning rail and where the bottom bracket mounts on the camper. If you have less than the 81" you want to look at the Solera Classic Universal Awning Support Arms # LC434718. These are for a height of 68-81" tall from the top awning rail to the bottom bracket mount. I recommend upgrading to a power...
  view full answer...
• Can Longer Awning Arms Replace Original Arms That Are Shorter?
  When deciding if it's best to go with a larger arm for your awning, you'll need to go by the actual awning/fabric extension instead of arm length. As long as that's good, you can use larger awning arm kits like the: -Solera Classic Universal Awning Support Arms for RVs # LC434718 for white, Or, -The Solera Classic Universal Awning Support Arms for RVs # LC434717 for black. However, if your awning when extended out measures less than 116", then the Solera 12V Power RV Awning Conversion...
  view full answer...
• Replacement Fabric And Roller Tube Option For A Dometic 9200 18 Foot Awning
  I took a look at what we have for your Dometic 9200 18' awning, and in order to replace your fabric and roller bar, you're also going to need to replace the arms with something like the: -Solera Classic Universal Awning Support Arms for RVs # LC434718, as your Dometic arms are not going to be compatible with Lippert's roller tubes # LC260560405. For fabric, you can use the Solera 18' Replacement Awning Fabric # LCV000334419. This is a solid black color, and will work great with an 18'...
  view full answer...
• Replacement Support Arms for Dometic Spring-Loaded Manual Awning
  If you have a Dometic spring-loaded manual awning on your 2015 Coachman Catalina 213BH we do have replacement awning support arms which will work; you simply need to choose the correct length and color from the following: - Solera Classic Universal Awning Support Arms for RVs - 68" to 81" Arms - White # LC434718 - Solera Classic Universal Awning Support Arms for RVs - 81" to 96" Arms - White # LC434720 Or - Solera Classic Universal Awning Support Arms for RVs - 68" to 81" Arms - Black...
  view full answer...
  
• Replacement Arms for Solera Awning
  Your photo didn't come through, but you can use the Solera Classic Universal Awning Support Arms for RVs - 68" to 81" Arms - White # LC434718 or # LC434717 in Black. This will replace your awning arms and give you a great replacement. I assume you don't have the really long arms, but if you have arms longer than 81 inches you can use the Solera Classic Universal Awning Support Arms for RVs - 81" to 96" Arms - Black # LC434719 or # LC434720 In White.
  view full answer...
• Finding Replacement Support Arms For An Awning On A 2006 Keystone Everest 364Q
  For your 2006 Keystone Everest 364Q, with a 20' awning, you can use the: -Solera Classic Universal Awning Support Arms for RVs - 68" to 81" Arms - White # LC434718, -Solera Classic Universal Awning Support Arms for RVs - 81" to 96" Arms - White # LC434720, Or The -Solera Classic Universal Awning Support Arms for RVs - 68" to 81" Arms - Black # LC434717, -Solera Classic Universal Awning Support Arms for RVs - 81" to 96" Arms - -Black # LC434719. You'll just need to measure the length...
  view full answer...
• Manual Awning Support Arms in White For Solera Awning Roller Assembly
  We do have manual support arms available in white for a Solera awning roller assembly like your Solera RV Awning Roller Assembly - 16' Wide - Black Fade # LCV000211486. In order to choose the right one, what you want to do is measure how much space you have from your awning rail straight down, and you will want to choose the length based on that, from the following options: - 63 to 68 Inches: Solera Classic Universal Awning Support Arms for RVs # LC434716 - 68 to 81 Inches: Solera Classic...
  view full answer...
• Parts Needed to Replace Carefree Awning Arms with Solera Awning Arms
  In order to replace your Carefree awning arms with Solera arms, you would just need to get the appropriately sized replacement arms compatible to replace a Carefree awning. I have listed these by size below. - Solera Classic Universal Awning Support Arms for RVs - 63" to 68" Arms # LC434716 (white) - Solera Classic Universal Awning Support Arms for RVs - 63" to 68" Arms # LC434715 (black) - Solera Classic Universal Awning Support Arms for RVs - 68" to 81" Arms # LC434718 (white) - Solera...
  view full answer...

Do you have a question about this Accessories and Part?