Arrives before Christmas 
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Mount your 5th-wheel-to-gooseneck coupler adapter to your MORryde pin box by replacing the skid plate with this adapter plate.
Features:
Note: Using a 5th-wheel-to-gooseneck coupler adapter may void the frame warranty of your fifth wheel. It is recommended that you contact the trailer manufacturer to determine whether an adapter can be used.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello, neighbors and friends, welcome back. I'm Steven with etrailer.com. Today we're taking a look at our Fifth Wheel to Gooseneck Coupler Adapter Mounting Plate for the MORryde Pin Boxes. Now this adapter plate will let you mount your fifth wheel to gooseneck coupler adapter to your MORryde pin box, that you can then tow your fifth wheel with a gooseneck hitch. Now that coupler adapter is sold separately, and it's either gonna bolt or weld onto this plate. Now this plate, again, is gonna replace the skid plate on your MORryde pin box.
The installation hardware is included. It also comes with these nice, heavy-duty plastic blocks. That's what it's sliding on to give you that extra smooth finish you need. Nice, heavy duty material on those as well. This guy is super, super thick, heavy duty steel.
Nice powder coat finish. Made here in the USA. Let me try to flip it up here, give you a back view. And that's the back. Couple of studs here.
Again, you got the mounted hardware and everything you need included. Now obviously, I've got it upside down here on the plate. Again, this pin box will be flipped over for your fifth wheel attachment. It is made here in the USA. Again, all the hardware included.
A very nice three year limited warranty. That's our Fifth Wheel to Gooseneck Coupler Adapter Mounting Plate. I'm Steve with etrailer.com. Thank you so much for looking at this with me today. Have a great one.
Average Customer Rating: 4.0 out of 5 stars (26 Customer Reviews)
Mount your 5th-wheel-to-gooseneck coupler adapter to your MORryde pin box by replacing the skid plate with this adapter plate.Well made with good powder coating. Was missing one washer, and bolt for the block. Picked up at local hardware store for 3$. Need to bag the hardware as it was all free to float around the box. Installed by myself in less than an hour.
Haven't installed it yet, When i received the adaptor it was missing the hardware. I called customer service and received the missing parts promptly.
The product looks great but the packing was coming apart when delivered. I am missing 1 3/8-16x1" bolt. Otherwise I am very pleased with product.
William
7/12/2024
Working as advertised
There was one good thing about this it actually was painted, not as the picture shows.
The bad, if you think it's going to be a breeze to install, per video think again. There are four blocks that come with this and because the top original part has welding slag in it that could not be removed one of the blocks would not slide in, so I had to us a dremel and cut out a divet in it to get it into place.
Then the four holes on the plate itself were so thick that it wouldn't slide in place. The old one you just held it up and it went right back on. Sooo, I had to grind down the metal on all four holes and because I didn't want to get carried away and weaken it I had to pound it into place once I got it ground down at least 1/4". Once I got all this done the project was finally finished although it took 3 people working on it for about four hours before the job was finalized.
I'm sure I could have sent it back and etrailer would have sent me a different one, but I didn't really want to have to disassemble and reassemble everything and then do it all over when a new one came in.
This is very poor quality control on Morryde's part and in the future I probably would not buy another Morryde product, especially since they told me it wasn't their responsibility to notify anyone (dealer's) that this part was necessary when they installed an Anderson hitch for their customers. I only found this out after the fact. It was a toss-up whether to install this or buy a different system altogether. Now I wish that I had.
Ordering and Shipping through etrailer is always effortless. Ordered to install on my 33' Jayco Eagle HT MorRyde cushioned pin box. I use the Andersen Ultimate Hitch and after reading comments on forums, some say the adapter plate was not needed. After receiving the adapter mounting plate and comparing the two, there is a big difference on the manufacturing. The new plate has additional welding/plates minimizing the flex caused by the Andersen Hitch on the pin. The supplied nylon bushing blocks eliminates the side by side movement when towing. Installation was straight forward and took less than an hour, watch the installation video on the MorRyde website, it helps. If you are in doubt in purchasing as I was, order it from etrailer and you will not be disappointed and put your mind at ease when towing.
Hitch plate was in good shape, packaging the product could be a little bit better. The box was thrashed by the delivery guy. Other than that it was a perfect match, for my replacement.
Everything fit as advertised and installed without issue. The packaging was pretty torn up and looked like it was taped up somewhere along the way. The part is really too heavy for a simple cardboard box. Luckily the small parts didn’t escape the box.
Martha did a great job processing our order.
One of the holes that secured the cushion block was miss drilled and I had to drill a new hole.
Katrina D.
10/21/2023
Do you by any chance have a picture of the spot where the hole was missing? I am a bit confused on what you mean by cushion box? Your pinbox? Please let me know, so I can further assist you.
Robert G.
11/4/2023
There wasn’t a hole where the bolts are.
Product and service 5. Box is a 1.
This part is hard and heavy(43 lbs). The box does not hold up well to rough handling. Don't plan on installing this skid plate on the day it arrives as the box may be compromised and the hard plastic blocks or plastic bag of bolts or instructions may be missing. Open the box and inventory parts as soon as it arrives.
wrong items shipped.
Jenny N.
5/18/2024
Oh no! We will contact you to send out the right one.
Box arrived intact. Have not inspected it yet.
The parts that I did received were good,but I didn’t received all the parts that were supposed to be with the kit. I had to contact someone at etrailer and mortadella to get the remaining pieces needed to finish the job. Quality control is lacking.
Arrived quickly. Fit well. People at etrailer were very helpful and polite. When speaking to MORride directly, they were rude and obnoxious.
This is an adaptor that is necessary if you have the MORryde Fifth wheel on your trailer and use the Andersen hitch in your truck. The box arrived crushed and damaged. When I opened the box, only the adaptor mounting plate was present and it had paint knocked off of two corners. It was supposed to come with the required stability blocks, flange nuts, bolting and washers (all missing). Etrailer did a good job of getting the missing required hardware to me within a few days. No instructions are included with the adaptor, but they are available on the Etrailer website and through MORryde. The additional lateral support provided by the plastic blocks provides peace of mind.
The package was delivered very quickly. However the package is very heavy and for that reason get easily damage in shipping. The box look like it had been beat all up and had to be retaped closed. One of the spacers is missing due to the package being damaged. This is common with heavy metal items. I think the hardware should be shipped independently of the coupler to make sure the hardware makes it. Several reviews speak of missing hardware. I will say etrailer has promptly responded to my emails about the missing parts and are getting them to me. etrailer is great to work with. The packaging is the real issue.
They only thing that I was not happy with is the fact that I bought it and then found out that I had to buy a different pin box plate to go with my anderson.
Missing one bolt. Fit as it was suppose to. Came with a coat of paint on it.
Jenny N.
4/27/2023
A missing bolt is a missing bolt. I want you to have all the hardware that is needed and I will have our Customer Service team reach out.
Could you please send some instructions of how to put it on
Thanks
Awesome
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jenny N.
7/15/2023
I am happy that you like this product. I will still have Customer Service reach out to you.