Optional length mounting bolts for securing your Malone watersport carrier to your rooftop crossbars. Includes (4) M8-1.25 x 80 mm mounting bolts.
Features:
Specs:
Note: Not compatible with Malone Paddle Carrier (MPG121)
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everyone. It's me, Angela And here each trailer interview. And today we'll be taking a look at our mounting bolt kit for your Malone water sport carriers here at etrailer. So if you have a Malone kayak high wall , any water sport carrier that you need mounted onto your roof rack, but you realize that maybe your roof rack has crossbars a little bit bigger than normal. Let's see you have Aero crossbars, What may happen is that you may need to get some longer bolts so that you can utilize the clamps that come with your carriers. So that's where these mounting bolts come in.
Also, if maybe you've misplaced, lost or broken the bolts that came with your kayak kit, these are the perfect replacement parts. So here we have the shorter bolt that comes with the seaweed kayak carrier. And you see how this is designed for like your round or your square crossbars, but not so much your Aero crossbars that's because it doesn't come down long enough for the clamp to fit around and we don't have enough threads to tighten it down and that's where you would use the longer bolts. So we have different bolt lengths that you can find here at etrailer that are threaded for your Malone kayak carrier. So the one I have right now, this is 90 millimeters long, but we also have different options like 50 millimeters or 16 millimeters.
Try to measure the height of your crossbar as well as your roof clearance, just to find out the best fit for you. The 90 millimeter long bolts are actually more ideal for your larger applications. Let's see you have the Yakima HD bar, which is a super heavy duty bar, that's where you would use a bolt like this. And depending on your kayak or water sport carrier, you may need four or eight bolts. So just double check with your kayak carrier how many bolts to actually utilize this, just to make sure you get the correct number that you need.
So these work as exact replacements for your pre-existing hardware on your moline kayak carriers, or as upgrades for your Malone kayak carriers, which means that they use the maroon wing nut that comes with your kayak kid. So let's take a look at that install process. So you know how to use or replace your own bowls. So we're going to be using our long bolt set. So just pop that right into your kayak carrier, right where your quarter bolts would have gone and then fit your clump underneath and just install just as normal.
So this is a lot more clearance compared to when we had the shorter bolts. You may have to hold onto it though, just to make sure you can tighten it down. So you can see here how having the correct bolt length is going to be important for your vehicle application, just because you wanna make sure that the bolts are long enough that they fit past your crossbars, but they're not too long where they'll hit your roof. So if you do have limited clearance, try to take those measurements first before you get these bolts and then install them. But once you have everything clamped down, just like you would with your Kayak Carriers original bolts, that's pretty much it for the install. So my personal thoughts about these mounting bolt kits is that you have to make sure you get the right length for your application. So depending on your crossbars, you may not need these super extra long 90 millimeter bolt, but maybe the 50 millimeter bolt is perfectly fine for you. So just take measurements of your own crossbars, just to see the height that you are looking for. And from there, you should be good to go. Other kayak carriers utilize a T slot mounting kit. So if you do have P track channels in your crossbars, that might be an option for you as well. We have all these different products here at etrailer, check out our product pages just to make sure you got the right fit for you, but as for how they work, they work great. And they're great replacements. If you broke, damage or loss with pre-existing hardware. And that was a look here at our Malone mounting bolt kit for your Malone water sport carriers here at etrailer.com.
Average Customer Rating: 5.0 out of 5 stars (4 Customer Reviews)
Optional length mounting bolts for securing your Malone watersport carrier to your rooftop crossbars. Includes (4) M8-1.25 x 80 mm mounting bolts.These bolts worked perfectly with my Malone kayak Seawings. The original ones that came with them were not long enough for my VW cross bars and these solved my problem.
I rebuilt a Malone Microsport and added 1 1/4” square bars. These allowed me to use the j-cradles I already had. Great customer service. Korren is fantastic.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.