Malone Crossbar Conversion Kit for Standard Utility Trailer
(35 reviews)
Price: $269.10
In Stock
Malone Crossbar Conversion Kit for Standard Utility Trailer
Item # MPG475
Retail:$299.00
Our Price: $269.10
You Save: $29.90
In Stock
Need help with installation?
Locate installers near me- All Info
- Reviews (35)
- Q & A (0)
- Videos (1)
- Photos
Malone Accessories and Parts - MPG475
- Trailers
- Watersport Carriers
- Roof Rack on Wheels Parts
- Watersport Trailer Parts
- Bars
- Malone
- Malone crossbar conversion kit
- Allows you to convert a standard utility trailer into a canoe, kayak, bike, or cargo box hauler
- Includes:
- (2) 78" Load bars with cross supports
- (4) Brackets
- Mounting hardware
- 5-Year warranty
- Made in the USA
MPG475 Malone Crossbar Conversion Kit for Standard Utility Trailer
Installation Details
California residents: click here
Video of Malone Crossbar Conversion Kit for Standard Utility Trailer
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of Malone Trailers - Crossbar Conversion Kit - MPG475
Hello everybody, this is Jeff at etrailer.com. Today we're gonna take a look at the Malone crossbar conversion kit for your standard utility trailer. Now this kit here will allow you to convert a nice standard utility trailer into a canoe, kayak, bike, or cargo box hauler. This kit allows you to attach these crossbars to your trailer with the included U-bolts and it gives you these 78-inch-long crossbars that'll give you plenty of space for attachment of your accessories. Does include everything shown here on the table. Again, it gives you two 78-inch-long by 1 1/4 inch-square steel-coated load bars with these galvanized cross support tubes.
Now these cross support tubes are built of 11 gauge galvanized steel. Gives you the four U-bolts with the hardware to attach these support tubes to the trailer. It gives you these four black powder-coated D rings. If you notice the holes on each end, right here, you can attach the D rings under to give you a place to tie down your accessories. It does come with these plastic end plugs, and these are designed to install in the ends of the tubes here, right here, here, here, here and the same on the front one.
Those will help seal those tubes to keep the elements or water from getting in there. All the mounting hardware and instructions are included. Now all the brackets and the hardware are galvanized to resist corrosion, provide years of service, and this does have a weight capacity of 400 pounds when the weight is evenly distributed. But that should do it for the review on this Malone crossbar conversion kit for your standard utility trailer..
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- Wrong item was ordered
- Alternate product found
- Product did not meet expectations
Customer Reviews
Malone Crossbar Conversion Kit for Standard Utility Trailer - MPG475
Average Customer Rating: 4.7 out of 5 stars (35 Customer Reviews)
by: AP07/10/2023
I was given an old trailer my grandfather built many years ago which he used to haul canoes to the BWCA. I wanted to convert it to be able to haul our 4 kayaks. This conversion kit worked perfectly.
by: Brian08/13/2023
The 2nd shipment sent Kayak rack looks great and installed correctly. My 1st package was received from UPS with a torn box and all the hardware missing.
by: Micheal04/26/2023
I used these on an inexpensive Harbor freight trailer to transport my kayaks. They worked great. I was happy with the e trailer website and have used it over and over for different things over the years . They have a huge selection of parts and give expert advice. Easy peasy purchasing and if necessary, returns. A real asset for guys that like to get their hands dirty building their own stuff.
by: Jeff 03/07/2023
Product installed and it works very well. Product is of very adequate strength and install was very easy. This kit makes a great conversion kit to bring a small utility trailer to the world of a kayak trailer. Also, working with eTrailer is yet again, a pleasure. Good follow up and timely delivery. Thanks!
by: Adam09/19/2023
Following a return from the first order due to missing items, a second delivery included all purchased items.
by: Tate 12/19/2022
worked great, allowed me to convert small boat trailer to 4 kayak hauling trailer.
by: DOT08/14/2023
Fast deliver and product was exactly as described.
by: Mario07/11/2019
Excellent product, used an atv trailer to safely transport 4 kayaks. Its low to the ground so no fighting to lift the kayaks. Highly recommend this product.
by: Troy05/20/2021
Need more information on exact size of materials and installation instructions. It would not fit my trailer cross bar. Recommend creating slightly larger U bolts or an option to order Ubolts in different sizes.
by: Doug03/26/2022
I need to install it on my Malone trailer. I believe the quality will be fine.
by: Edgar06/13/2018
Received packaged with end caps of load bars missing. Unable to install front support bar on the V of the trailer frame (brackets too short) as per instructions. Called Malone - product only for general use & I have to get additional bracket, etc.. The end caps promised to be mailed.
Conclusion - expect to do some modification/additional hardware to install.
by: Mike 08/03/2022
Great product, very good quality and fast shipping.
by: Daniel06/02/2021
They were exactly what I needed. Great customer service and fast shipping. Holds two kayaks on my refurbished jet ski trailer.
by: Serge05/13/2021
I bought this to convert a jet ski trailer. It does what it’s meant to do, well built and is very solid. It’s a bit time consuming to assemble and remove if you want to use your trailer for something else. Best suited for a permanent installation.
by: Steve06/25/2019
very happy with the product it was delivered today June 25th installed it on my trailer it will work fine thanks e-trailer
by: Lori 01/08/2021
Used to create side by side Hobie pa12 trailer
by: Jennifer Wells11/16/2021
Very easy install. Very sturdy. Holds my kayaks great!!
I would buy again.
by: Mike 08/31/2021
Great product and customer service. I only order from you because of the service.
by: Robert 08/19/2021
Quality product. Easy assembly.
by: Gerrit07/22/2023
by: James 08/14/2022
by: Mike05/06/2023
by: Katrina 01/28/2022
25
35
Show More Reviews
See what our Experts say about this Malone Accessories and Parts
- Weight Capacity of Malone Crossbar Conversion Kit for Standard Utility Trailer # MPG475The Malone Crossbar Conversion Kit for Standard Utility Trailer # MPG475 that you referenced has the weight capacity of the Malone crossbars that come with the kit of 400 lb.
view full answer... - What Is The Width Of The Base For The Malone Crossbar Conversion Kit?You'll be pleased to hear the base of the: -Malone Crossbar Conversion Kit for Standard Utility Trailer # MPG475 measures 32" before the bar starts to curve upwards. I have also attached an image showing this measurement for you to check out.
view full answer...
- Height of the Malone Crossbar Conversion Kit for a Standard Utility TrailerThe Malone Crossbar Conversion Kit item # MPG475 comes with two 78" crossbars that are 13-3/4" tall when put together. The crossbars are made of 1-1/4" square steel so you will have about 11" - 11-1/4" of a gap inside the bottom and top bar.
view full answer... - Width of U-Shaped Base on Malone Crossbar Conversion for Utility TrailersThe U shape below the crossbars on the Malone Crossbar Conversion # MPG475 is 45" wide.
view full answer...
- Weight Capacity of Malone Crossbar Conversion Kit for Standard Utility TrailerI checked with Malone about the Malone Crossbar Conversion Kit for Standard Utility Trailer part # MPG475 and confirmed the weight capacity as 400 lbs evenly distributed.
view full answer... - How Long U-Bolts of Malone Crossbar Conversion Kit # MPG475The U-Bolts that arrive with the Malone Crossbar Conversion Kit # MPG475 Hardware Kit are 1/2" U-Bolts that 6" long & 2" wide.
view full answer... - How Much Does Malone Crossbar Conversion Kit for Standard Utility Trailer # MPG475 WeighThe Malone Crossbar Conversion Kit for Standard Utility Trailer # MPG475 that you referenced weighs 35 lbs.
view full answer... - How Wide is Malone Crossbar Conversion Kit # MPG475 Excluding CrossbarThe widest portion of the # MPG475 that you referenced excluding the crossbar is 53-15/16 inches. Including the bar it's 78 inches.
view full answer... - Could Malone Crossbar Conversion Kit # MPG475 Be Used on 5x8 Tractor Supply TrailerThe crossbars of the Malone Crossbar Conversion Kit # MPG475 that you referenced are 13-3/4 inches tall so this kit would easily fit over your trailer side rails that are 11 inches tall.
view full answer... - How To Carry 2022 Hobie Mirage Outback Kayak On Utility TrailerThe 2022 Hobie Mirage Outback weighs around 85 lbs and measures just under 13' long. The Malone MegaWing Fishing Kayak Carrier with Tie-Downs part # MPG207 has a 150 lb weight capacity with extra long straps so it will be the perfect choice. If you don't already have crossbars on the trailer, you can use the Malone Crossbar Conversion Kit for Standard Utility Trailer part # MPG475.
view full answer... - Can 86 inch Crossbars be Added to Malone MegaSport TrailerThe 86" crossbars on your Malone MegaSport Kayak Trailer # MPG535 aren't available as replacements, but we do have the Crossbar Conversion Kit # MPG475 which comes with 78" crossbars that sit 13-3/4" tall if that works for your application. Keep in mind that this kit is for a standard utility trailer so you will need to figure out how to get the crossbars to fit the trailer.
view full answer... - Using Malone MegaWing Kayak Carrier on Trailer to Secure Old Town Fishing Kayak The Malone MegaWing Kayak Carrier # MPG207 referenced in your question is a great option for your Old Town Fishing Kayak that weighs around 120 pounds. The MegaWing is made specifically for heavier fishing kayaks like this and its 150 pound weight capacity is more than enough to safely support it. The carrier is designed to mount to a couple of crossbars that are up to 4-1/4 inches wide so you will need to fabricate a rack to mount to your trailer's frame or you can use something like...
view full answer...
- Malone Crossbar Kit For 6'x8' Utility TrailerThe Malone TopTier Load Bar Kit for Utility Trailers part # MPG493 fits 4' wide and 5' wide trailer decks so it would not be compatible with your 6 foot wide utility trailer. The Malone Crossbar Conversion Kit for Standard Utility Trailer part # MPG475 will fit the 6'x8' utility trailer if it has an open frame with square rails.
view full answer...
- Will The Malone J-Style Kayak Carrier Install On The Malone Crossbar Conversion Kit?Yes, the standard J-hooks on the Malone DownLoader Kayak Carrier With Tie Downs # MPG114MD will attach to the Malone Crossbar Conversion Kit for Standard Utility Trailer # MPG475.
view full answer... - Will Rhino-Rack Nautic SUP or Kayak Roof Rack Work with Malone Crossbar Conversion KitYes, the Rhino-Rack Nautic SUP or Kayak Roof Rack part # RR570 will fit the Malone Crossbar Conversion Kit for Standard Utility Trailer part # MPG475. The Rhino-Rack Nautic SUP or Kayak Roof Rack works with crossbars up to 1-3/8" tall and the Malone Crossbar Conversion Kit for Standard Utility Trailer has crossbars which are 1-1/4" tall so it will be close, but still a fit nonetheless.
view full answer... - 4" Long U-Bolts That Will Fit The Malone Crossbar Conversion Kit # MPG475The Square U-Bolts # 381344UB are 1-3/4" wide on the interior of the 3/8" U-bolt. These are 4" long from the inside of the U to the end of the threads. They can be used in place of the U-Bolts that came with the Malone Crossbar Conversion Kit # MPG475. You will need 2 sets of the Square U-Bolts # 381344UB since they come as a pair.
view full answer... - CE Smith Trailer Compatibility and Conversion For CrossbarsThe CE Smith Boat Trailer for Boats and PWCs up to 12' Long - 800 lbs # CE48810 will allow the winch stand with the winch and bow stop to be adjusted front to back to allow for proper fit and tongue weight. I've attached the installation instructions to assist as well as a video. The bunk boards can be removed if desired and you can use the Malone Crossbar Conversion Kit for Standard Utility Trailer # MPG475 to give you crossbars.
view full answer... - Converting Malone MicroSport Trailer Crossbar Conversion to Low Bed StyleSince you already have the Malone MicroSport Trailer - Galvanized Steel - 13' Long - 78" Crossbars - 800 lbs # MPG460G already comes with the Malone Crossbar Conversion Kit for Standard Utility Trailer # MPG475. It sounds like you are just looking for the lower crossbars but there isn't a conversion kit option for those bars. You can customize mounts just bolting square aluminum posts at your desired height to the frame and use the Crossbars for Malone MicroSport Trailers - 78" Long -...
view full answer... - Recommended Crossbars for Standard 5x8 Utility Trailer to Carry 4 KayaksI recommend the Malone TopTier part # MPG493. The Malone TopTier is designed to add load bars to an open trailer. The steel uprights attach to the side rails of the utility trailer since there is not a roof to attach the hardware to. The uprights install on trailers that are 4 feet or 5 feet wide so they work with your new trailer. The setup is about 4 feet tall so you can add cargo to the trailer as well if you need to. The bars are 78 inches long, so the 4 kayaks fit the bars on their...
view full answer... - Recommended Crossbar Kit for 14' x 6.5' Aluminum TrailerIf you have a utility trailer then we do offer a kit that allows you to mount crossbars onto them, the Malone Crossbar Conversion Kit for Standard Utility Trailer part # MPG475 which are then compatible with the Malone SeaWing Kayak Roof Rack part # MPG107MD. This kit attaches to the trailer floor, not the side rails which we don't have any options for. If this won't work, please send a photo of the trailer so I can better assist.
view full answer... - Availability of Conversion Kit to Adapt Utility Trailer to Malone Crossbars/Kayak CarrierSounds like you are looking for the Malone Crossbar Conversion Kit part # MPG475. This allows you to convert a standard utility trailer to having a set of Malone Crossbars which you could then use a Malone kayak carrier like the # MPG107MD on.
view full answer... - What is Weight Capacity of Malone Crossbar Conversion Kit for Standard Utility Trailer MPG475The weight capacity for the set of crossbars part # MPG475 is 165 lb so it wouldn't have the capacity for the 210 lbs you mentioned. You'd have to look into the Malone trailer part # MAL53FR which has a higher 400 lb capacity and would work great.
view full answer... - Carrying Kayaks On A Utility TrailerWithout knowing the size of your trailer I cannot adequately answer whether or not it will work for your situation. Securing the kayaks, safely, in the trailer would be your greatest challenge. It is safer to attach and secure the kayaks to a dedicated kayak carrier, whether it is on the roof or crossbars on the trailer. There is less opportunity for the kayaks to move during transport. For example if you used a j-style carrier you would attach the kayak to the carrier, via cam straps,...
view full answer... - Recommendation to Install Crossbars on Utility Trailer for Kayak CarrierI may have a solution for you, however the Inno Truck Bed Cargo Rack # INRT101-79 referenced in your question is designed specifically for certain model truck beds, so it might not be the best fit for your utility trailer. For your trailer, I recommend looking at the Malone Crossbar Conversion Kit # MPG475. This system is designed for utility trailers like yours to allow you to transport kayaks with your existing carriers. It includes two 78 inch load bars, 4 brackets and the mounting...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Installed by:
Jeff D
Installed by:
Adam E
Expert Research:
Jameson C
Expert Research:
Adam R
Video by:
Chris R
Edited by:
Daron K
Written by:
Jonathan S
Updated by:
Jessie B
Updated by:
Isabelle B
Updated by:
Noah M
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.