bing tracking image
  1. Accessories and Parts
  2. Optronics
  3. Trailer Lights
  4. Wiring
  5. Plugs and Pigtails
  6. Two Wire
Right Angle 2-Wire Pigtail for Optronics Trailer Lights - 2-Prong PL-10 Plug - 6" Lead
Optronics

Right Angle 2-Wire Pigtail for Optronics Trailer Lights - 2-Prong PL-10 Plug - 6" Lead

Part Number: A46PB
In Stock
$5.44
Retail:$9.99
You Save: 46%
Accessories and Parts
Add to cart
Right Angle 2-Wire Pigtail for Optronics Trailer Lights - 2-Prong PL-10 Plug - 6" Lead Wiring A46PB
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
2-Wire pigtail has a male plug on one end that pairs with the female connection on your Optronics light. Right-angle plug allows wires to run down from light instead of straight out the back. Designed for side marker, clearance, and utility lights. 1-800-940-8924 to order Optronics accessories and parts part number A46PB or order online at etrailer.com. Free expert support on all Optronics products. Great prices and Fastest Shipping for Right Angle 2-Wire Pigtail for Optronics Trailer Lights - 2-Prong PL-10 Plug - 6" Lead. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (620)
  • Q & A (0)
  • Photos

Optronics Accessories and Parts - A46PB

  • Trailer Lights
  • Wiring
  • Plugs and Pigtails
  • Optronics
  • Two Wire
  • Right Angle Pigtail
  • 6 Inch Long

2-Wire pigtail has a male plug on one end that pairs with the female connection on your Optronics light. Right-angle plug allows wires to run down from light instead of straight out the back. Designed for side marker, clearance, and utility lights.


Features:

  • Pigtail with 2-prong plug allows you to wire your Optronics light to your trailer
    • Designed specifically for use with Optronics side marker, clearance, and utility lights
  • Right-angle design of plug allows wiring to run down from the light rather than straight out of the back
  • Male-pin, 2-prong PL-10 molded plastic plug connects to back of trailer light
  • 2-Wire pigtail
    • White wire for ground
    • Black wire for power
  • Wire length: 6"


diagram of pigtail

Pigtail is a direct replacement for:

  • Uni Bond # PT6020
  • Wesbar # 108662
  • Truck Lite # 94902
  • Grote # 67050
  • Peterson #142-49
  • Bargman # 40-00-002


A46PB Optronics PL-10 Right Angle 2-Wire Pigtail for Trailer Marker/Clearance and Utility Lights

Alternate part number: A-46PB




California residents: click here


Customer Satisfaction Score:


Customer Reviews

Right Angle 2-Wire Pigtail for Optronics Trailer Lights - 2-Prong PL-10 Plug - 6" Lead - A46PB

Average Customer Rating:  4.8 out of 5 stars   (620 Customer Reviews)

2-Wire pigtail has a male plug on one end that pairs with the female connection on your Optronics light. Right-angle plug allows wires to run down from light instead of straight out the back. Designed for side marker, clearance, and utility lights.

by:

I've been extremely pleased with the Optronics branded products!

The right angle design allows the wiring to follow along the contours of the trailer without bending. The connector, wire and insulation are well make and very durable.

This item pairs well with the Optronics Trailer marker lights. They 'snap' into the lights to ensure a secure fit. The 6" leads provide enough length for my application.

I would buy again as they pair nicely with the Optronics lights!

Timothy

5/27/2024

After a year on the boat, the connectors are still working flawlessly. Ive never had an issue with them coming loose and they show no signs of corrosionrust. Very pleased with these!



by:

Here is the light I bought from etrailer.buyers work lights and optronic marker lights. Very nice Very bright.



by:

The etrailer listing for lighting products should clearly show all the options and components required for a complete assembly. I bought the LED lights on a previous order and when received realized I need additional items to make it a complete assembly. The additional items were pricey considering that they are just short pieces of wire and a plastic base. Would suggest that the entire assembly be listed at a reduced price. I also lost out on free shipping with this additional order.
Your web parts listings are generally very good and informative but if I missed this maybe others have or will also.
Thanks,



by:

All products received were as advertised for quality and fitment.The service received was unexpected and appreciated. Speaking with people that actually know their product, offering solutions as needed and over-performing on deliveries has made me a loyal customer to eTrailer. It is refreshing to know a company takes the definition of “service” seriously. Thank you for helping us get our trailer back on the road sooner than expected!



by:

Great product for my boat trailer marker light. Product shipped quickly, as usual, from etrailer. I have never been disappointed with any product or service from this company. Another 5 star review!!



by:

This did not fit the reverse light side of the light like it said on website you need to use 2 3pin pigtails.



by:

Just what I needed to replace the Amber light on my boat trailer perfect fitment



by:

ETrailer has definitely earned my business for life! Ordering was a breeze from their website and the communication on my order was fantastic. Shipping was fast. Highly Recommended! 5 Stars!



by:

Exact replacement. Easy install. Great service.



by:

Worked as it should. Wish you guys also carried the one with the molded bullet connectors on the black wire.



by:

Always happy with etrailer



by:

Items were as described, fast shipping and thank you Matt for your assistance



by:

Exact fit and fast shipping.



by:

Great Service and Selection for all things Winnebago.
Many thanks to David Straw for his professionalism and helping me find the correct part for my 20 year old motor home.



by:

I was easily able to locate the trailer lights I required on this excellent website. Delivery was fast and the product was excellent. Thank you!



by:

Makes rewiring my trailer easy



by:

Worked as intended



by:

These lights look and work great



by:

You folks always do it right. I received what I needed and very quickly. Thanks!



by:

Exact replacement for my old tech trailer lights.
Great service, no hassles. Arrived on time.
I’ve used these guys before and will continue to use them.
Thanks



by:

Purchased many items , these LED side marker lights for my EZ Loader trailer are perfect, I will purchase more as needed. Shipping was fast !



by:

rapid shipment- accurate orders, product is great quality.

Bryan

12/7/2023

this is still in operation with no issues, quality product



by: 04/01/2024

Print delivery and just the right parts
Jut



by:

Works as advertised.



by:

Everything arrived quickly and quality was great


25
620
Show More Reviews

See what our Experts say about this Optronics Accessories and Parts

  • Replacement Clear Marker Light For a Glo-Brite 9500c-88
    While we do not carry the Glo-Brite 9500c-88 you currently have, we do have a light that will work as a replacement for you. From the information I could find on your Glo-Brite 9500c-88, it measures 2" in diameter. For the clear light, you would want the Optronics Miro-Flex LED Utility Light # UCL50CB. This light measures 2" in diameter and should fit in your current grommet. You would also need the 2-Wire Pigtail for Optronics Trailer Lights # A46PB. If you want to replace the grommet...
    view full answer...
  • Optronics Trailer Clearance Light Similar to AL 91RB that Installs With Smaller Hole Drilled
    The Optronics clearance light part # AL91RB in all of it's configurations would require a hole to be drilled for a harness like the part # A46PB to install with a grommet like the part # A91BOB. There isn't a way to mount it flush without drilling. If you used the part # AL82RB instead though it would require a much smaller hole be drilled since the entire harness of the other setup gets ran through the hole.
    view full answer...
  • Availability of Optronics Beehive Trailer Marker Light with Red Lens
    The Sealed Beehive Trailer Side Marker Light is indeed available with a red lens, in an LED version as part # MCL21RB. You might also need a flush mount grommet, # A54GB or a wire pigtail, part # A46PB.
    view full answer...
  • Does The Optronics LED Side Marker Light # AL91AB have 2 Male Connector Posts
    Yes, The Thinline LED Clearance and Side Marker Light # AL91AB has 2 male connector posts on it. This waterproof trailer light functions as both a clearance light and a side marker light when properly mounted. It is 2-1/2 inches long by 1-3/16 inches wide by 7/8 inches deep. The Right Angle 2-wire pigtail # A46PB and The Mounting Bracket # A91BOB are sold separately. I attached a review video link below.
    view full answer...
  • Is There LED Version of Optronics Trailer Clearance Light MC52RB
    There is absolutely an LED alternative with the same dimensions as the incandescent Round Trailer Clearance, Side Marker Light # MC52RB. What you need is the following: - LED Trailer Clearance and Side Marker Light # MCL52RB The # MCL52RB is the same 2-15/16" diameter with mounting holes that are 2-15/16" diameter apart on the flange. The only other thing you'll need with the light is 2-Wire Pigtail # A46PB.
    view full answer...
  • Outside Diameter of 2 Inch Round Grommet
    The outside diameter of the 2" Round Grommet # A54GB you referenced is 2-3/4". This grommet is used with 2" round lights such as the GloLight LED # MCL155RB (Red) or GloLight LED # MCL155AB (Amber). You will also need a 2-wire pigtail to complete the installation of these lights; either # A46PB for a 6" lead or # A49PB for a 10" lead. I have added links to video reviews of these parts for you to check out.
    view full answer...
    Image 1 for
  • Flush Mount Grommet and Wiring Pigtail for 2 Inch Clearance and Side Marker Lights
    The Sealed, 2" Round Trailer Clearance and Side Marker Light, Flush Mount - Amber # MC53AB or the LED # MCL55AB will use the 2" Round Grommet - Flush Mount - Open Back # A54GB for installation. You will also require the wiring pigtail # A46PB which will give you 6 inches lead.
    view full answer...
  • Where to Find 2" Trailer Clearance Lights
    All of our clearance lights have their own wiring so you'll need to do some splicing on your end to get all of the lights to properly function. If you're needing red 2" clearance lights you can use the part # MCL55R1224B you were looking at but if you need amber (orange) 2" clearance lights you can use the part # MCL55AB instead. To splice your wiring together you can use the Pigtail # A46PB and heat shrink butt connectors like the kit # DW05743-5 to help give you the most secure and protected...
    view full answer...
  • Trailer Wiring and Lighting Replacement for Trailer with 4.5 inch Red and 2.5 inch Amber Light
    For a 4-1/2 inch diameter trailer taillight that can do stop/tail/turn functions we have the part # STL43RB which would work well. For a rubber grommet then we'd need the part # A45GB. Then for a pigtail harness you'd need the part # A47PB. For the 2-1/2 inch amber lights you'd want the part # MCL59AB and for a grommet for this you'd need part # A55GB. For a pigtail for this you'd want part # A46PB. Then for 4-way wiring sold by the foot you'd want the part # 16-4B-1.
    view full answer...
    Image 1 for
  • What Bracket and Wire Plugs Fit The Thinline LED Trailer Clearance Light # OPT66FR?
    You will need the Bracket # A65B with either the 1-Wire # A65P or 2-Wire # A46PB for the Thinline LED Trailer Clearance Light # OPT66FR.
    view full answer...
  • Availability of Replacement Trailer Taillight 9500-88-BLU
    I do have options for you but we do not carry the Globrite part 9500-88-BLU. However, based on my research this light has a clear lens with an LED bulb and measures to be 2" in diameter x 1" deep. For a replacement, I recommend using the LED Trailer Clearance/Side Marker Light part # MCL55ACB for amber or part # MCL55RCB for red. This light has a clear lens with LED bulbs and dimension of 2" in diameter x 1" deep. In order to install this light you will need to use the pigtail part # A46PB...
    view full answer...
  • Replacement Taillights, Wiring and 7-Way Connector for Car Hauler
    To fit the round 4-1/2 inch holes on your trailer for the rear brake lights you could use the # STL42RB as this will fit in that hole. For a pigtail harness you would also need # A45PB. For the side clearance lights you would need to enlarge the holes to 3 inch in diameter, use the # A55GB as a grommet and then use # MCL59AB for the lights and # A46PB as a wiring harness. For a replacement 7-way with 8 feet of wire for running new wire everywhere you would want the part # H20046. You...
    view full answer...
    Image 1 for
  • Availability of a 2 Inch Diameter LED Trailer Light
    We currently don't stock a 2 inch that is 11/16 inch deep. The closest we have are two and a half inch and 11/16 inch deep LED red lights: # MCL59RB # MCL57RB Another very close option would be Optronics GloLight LED # MCL155RB. It's 2 inch diameter and 3/4 inch deep. You may need # A46PB two wire pigtail for sealed trailer clearance, side marker lights.
    view full answer...
  • Clearance and Side Marker Light With Clear Lens and Red LEDs
    We do carry a number of options for clearance lights that have a clear lens and red LEDs, but the red equivalent of the Thinline LED Mini Clearance and Side Marker Light - Clear Lens - Amber # AL91CAB has a red lens as opposed to a clear lens; it is the Thinline LED Clearance and Side Marker Light # AL91RB. If you want to go this route you can mount it with Grommet # A91GB (recessed mount) or Mounting Bracket # A91BOB (surface mount) with Right Angle 2-Wire Pigtail # A46PB. For similar...
    view full answer...
  • How Does Part A91BOB Mount To The Trailer and Are The Lights It Holds Submersible
    I have a solution for you, but we don't have any clearance lights that would mount with the white bushing you're referring to. If you went with the # AL191AB and # AL191RB like you mentioned you would need the # A91BOB mounting plates to mount them onto your trailer. These can be secure with a nut/bolt or with a self tapping screw into the trailer frame and you can use the same size screw/bolt as the bushings to make sure it's a secure connection. You will also need the 2 Wire Pigtail #...
    view full answer...
    Image 1 for
  • How Does Optronics Cam-On Mounting Bracket Work and What Trailer Lights Fit It
    I made a video for you showing how Optronics trailer light bracket # BK5557GB works with a light. This bracket will accept the following lights: LED applications: MCL-55, MCL-56, MCL-57, MCL-527, MCL-51, MCL-58, MCL-59 Incandescent applications: MC-55, MC-57 And you would use a wiring pigtail, # A46PB, which will just plug into the back of the light.
    view full answer...
  • Does Optronics Mini Thin Line LED Marker/Clearance Light # AL191AB Use Grommet # A91GB
    Yes, the Optronics Mini Thin Line LED Marker/Clearance Light # AL191AB can be flush-mounted using the Optronics Flush Mount Grommet # A91GB. This PVC grommet will provide a degree of shock protection for the installed light and its rear opening allows easy access for wiring. If you prefer a surface-mount installation, you can instead use self-grounding mounting bracket # A91BB. The marker light # AL191AB has a 2-prong input on the back; you can use 6-inch pigtail plug # A46PB, or if you...
    view full answer...
  • Availability of Red-Lens Beehive Side Marker and Clearance Light
    We do offer a red-lens Beehive LED Trailer Clearance/Side Marker Light from Optronics, their part # MCL21RB. This high-efficiency LED light features 8 diodes and can be mounted using Round Grommet # A54GB and connected using Two Wire Pigtail # A46PB. We do not have the exact bracket mount light you referenced in a red version. The link at right will show you all round, red surface-mount clearance lights.
    view full answer...
  • Wiring Harness Pig Tail Recommendation for Clearance Light MC57RB
    For a pigtail harness to use with the part # MC57RB you would want the part # A46PB which plugs right into the back of the light. You could splice two sets of the harnesses together if you wanted to power two sets of lights as well.
    view full answer...
  • Wiring Marker Light onto Trailer
    Marker lights do have polarity, but when you use the correct pigtail for the lamp it'll be evident which wire is which. For example, the # MC57RB marker light you referred to uses a # A46PB pigtail. The pigtail will only insert into the back of the lamp one way, the black wire is for power and the white wire grounds to the trailer. I'll link you to our trailer wiring help article, which contains all kinds of diagrams and helpful information.
    view full answer...
  • What is the Depth of Optronics 2-Wire Pigtail?
    I believe what you are asking is the depth of 2-Wire Pigtail # A46PB, and it is 0.6 inches, which is just 0.1 inches more than the depth of both mounting brackets you were referring to, # A91BOB as well as the self-grounding # A91BB. This means it would protrude ever so slightly from the back of the bracket when attached to lights # AL90RB and # AL90AB.
    view full answer...
  • Availability of a Downward Projecting Submersible License Plate Lamp for a Boat Trailer
    The license plate lamp you referenced, part # UL94CB would project the light outward. If you were looking for a lamp that would mount above the plate that would shine downward, I would recommend the Optronics Sealed Rectangular Mini License Plate Light, part # LP91CB. If used along with the Trailer License Plate Bracket, part # LP25SB and the Two Wire Pigtail, part # A46PB, you will have a submersible license plate lamp that projects downward.
    view full answer...
  • Availability Of White Replacement Fender For 2003 Shoreland'r Trailer W/ ST205/75R15 Tires
    I sure can! Based on the picture you provided the correct replacement fender for your trailer is going to be the Plastic, Single-Axle Trailer Fender w/ Top and Side Steps - White - 13" to 15" # PF11X35W which will work perfectly with the ST205/75R15 tires on your 2003 Shoreland'r Trailer and closely resembles your current fender. You will also need mounting brackets # PF1135-BKT-2 to mount the fender to your trailer. In regards to the clearance lights I will need to know the length...
    view full answer...
    Image 1 for Image 2 for
  • Recommended Wiring and Bracket for an Optronics AL91AB
    We definitely have the wiring and brackets needed to get you up and running. With that being said, you will need the Right Angle 2-Wire Pigtail # A46PB and the Mounting Bracket for Optronics AL91 # A91BOB. The # AL91AB lights will snap into the # A91BOB and then the # A46PB will plug directly into the back.
    view full answer...


< Previous
123. . .6



Do you have a question about this Accessories and Part?


Info for this part was:

Employee Patrick B
Video Edited:
Patrick B
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Andrew L
Video by:
Andrew L
Employee Laura H
Updated by:
Laura H
Employee Amy B
Updated by:
Amy B
Employee Wilson B
Updated by:
Wilson B
Employee Brian T
Updated by:
Brian T
Employee Noah M
Updated by:
Noah M
Employee Cole B
Installed by:
Cole B
Employee Shane T
Installed by:
Shane T
Employee Brent H
Installed by:
Brent H

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.