Trailer License Plate Mount Bracket, Heavy Duty Zinc Steel
(372 reviews)
Price: $3.01
In Stock
Trailer License Plate Mount Bracket, Heavy Duty Zinc Steel
Item # LP15SB
Retail:$17.45
Our Price: $3.01
You Save: 83%
Orders above $99 qualify for Free Shipping
In Stock
- All Info
- Reviews (372)
- Q & A (0)
- Videos (2)
- Photos
- Why etrailer?
Optronics Accessories and Parts - LP15SB
- License Plates and Frames
- Mounting Hardware
- Brackets
- Optronics
Trailer License Plate Mount Bracket, Heavy-Duty Zinc-Plated Steel
A heavy-duty license plate bracket for use with stud-mount license plate lights. With zinc-plated all-steel construction, this bracket is extremely durable.
- Polished metal license plate bracket
- Made of heavy-duty zinc-plated steel
- Used with stud-mount license lights and combination stop, tail, and license lights
Manufacturer Cross Reference
Bracket will work as an exact replacement for:
Uni Bond # LH1000Z
Wesbar # 3203
Peterson # B428-09
Bargman # 30-72-100
Manufacturer Specifications
Zinc plated steel license plate bracket, designed for durability. For use with stud-mount license lights.
LP15SB Heavy Duty License Plate Bracket by Optronics, Inc.
Alternate part number: LP-15SB
California residents: click here
Video of Trailer License Plate Mount Bracket, Heavy Duty Zinc Steel
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Optronics License Plates and Frames LP15SB Review
Speaker 1: Today we're taking a look at a trailer license plate mount bracket. This trailer license plate bracket is extremely strong and durable. It does a great job at creating a solid area for your license plate to be mounted. It is made of heavy duty steel, and it's zinc coated, or zinc plated to resist rust and corrosion. It can be used with stud mounted license plate lights, as well as tail lights that have a built in license plate light. So, it can be installed directly behind your taillight assembly.
And as you can see here, it angles down and provides a great area for mounting your license plate. And then the light would be able to shine down, illuminating the license plate area.A few measurements to go over with you real quick to determine whether or not this will work for your application. The overall length of the unit, measuring edge to edge, is about 8 7/16 of an inch to 8 1/2 inches. The holes for mounting the license plate, you can see these are elongated and their separated apart from one another on center. So, center on center, is about, I'm going to say about 6 3/8 inches apart.
Right in that area. The holes for stud mounted taillights. That's these two holes right here. These are separated on center by two inches. The holes for a standalone license plate light, these right here, are elongated and their separated apart from one another on center by 2 1/4 inches.
And those smaller holes right there are separated on center by and inch and a quarter. The gap located right here at the top, has a gap measurement of 1 1/8 inches wide by 1 1/8 inches deep.And it's put together really well. Again, steel construction, heavy duty design. And it does have protective coating to keep it safe from rust and corrosion. That's going to do it for today's look at the trailer license plate heavy duty mount bracket..
Customer Reviews
Trailer License Plate Mount Bracket, Heavy Duty Zinc Steel - LP15SB
Average Customer Rating: 4.9 out of 5 stars (372 Customer Reviews)
- LP15SB
by: RVman08/07/2014
Are you kidding? This metal license plate mount is rock solid and under $2. The holes are set up perfectly to fit the mounting bolts on my driver side trailer light and the position of the license plate when mounted allows it to be lit by the clear lens on the bottom of the trailer light when the running lights are on. Also, the bracket allows the mounted license plate (and frame) to just clear the rail of the flat bed trailer itself. Yeah, it's a perfect fit. Thanks, trailer!!
- LP15SB
by: Robert05/31/2022
I purchased two tag license frames, one for my boat trailer and the other for my trash/hauling trailer. Both trailers had plastic license holder frames and one broke on rough surface.
- LP15SB
by: Matthew05/18/2018
Sturdy material, but not completely universal. On my Carson trailer, I had to flip the bracket backwards since the indentation on the bracket come down far enough to allow for the trailer light box. Also, the hole line up tonattach to the light box was just off enough I had to force the bracket on. However, once I installed it, it was solid and so don’t fear it will come off on its own.
- LP15SB
by: Robert07/13/2022
Excellent product description with relevant questions and answers from prior customers!
- LP15SB
Robert - 04/25/2022
by: Robert04/23/2021
The product was exactly as pictured and described. I am extremely pleased and recommend retailer products to anyone.
Comments
It works great. Absolutely no issues at all. I would highly recommend etrailer products to anyone.
Robert - 04/25/2022
- LP15SB
by: Richard04/29/2019
I think you will find these photos show a unique installation of your metal trailer license plate holder. My Yamaha golf cart is street legal which requires a license plate. You will see in close up photo that the holder is used up side down for a custom fit. Couldn't be happier. The plastic holder was not stiff enough so your holder is perfect.
- LP15SB
by: Craig07/03/2022
Much better than the plastic one that came with the lights on the trailer.
- LP15SB
by: Greg03/14/2022
Very happy with my order once received. Only downside was it took a long time using USPS. etrailer responded quickly. USPS did not.
- LP15SB
by: Kenneth11/21/2021
Both brackets arrived in great condition. There was an issue with the items being backordered from the manufacturer, however I was notified on their status weekly by Carol at eTrailer. Would recommend these items and eTrailer to any purchaser. Shout out to Carol for keeping me in the loop!
- LP15SB
by: William07/17/2022
Excellent quality, easy online ordering and blistering fast delivery once again. Thanks
- LP15SB
by: John03/10/2022
Fit perfect on the 7,000 lb utility tra iler.
- LP15SB
by: Mark G04/17/2014
Old bracket was plastic and easily broke off. I Ordered a metal one from etrailer at a great price. I painted mine with some extra plasti dip I had laying around and riveted it where the old one was and it's better than new!
- LP15SB
by: Mark01/11/2022
Everything that I have ordered from y'all has been perfect! Be ordering again I'm sure-I have quite a few trailers and such. Thanks again, Mark from Spicewood,Texas
- LP15SB
by: Gary07/10/2022
Just fine. What I expected
- LP15SB
by: Jerry Andalon05/22/2017
Great well made product just as advertised. No more lost license plates due to cheap plastic brackets. This metal bracket looks like it's going to last a a life time!
- LP15SB
Rachael H - 8/12/2014
by: Mike R.07/13/2013
Great product at a great price. Took five minutes to install.
Comments
Mike, where did you get your old black plastic bracket that broke? I had the exact same one and I liked it and it worked for me. I cant find a suitable replacement and would like another one just like this. Thanks!
-- comment by: Troy - 08/11/2014You might check out the Optronics # LP10SB
Trailer License Plate Mount Bracket, Angled, Rust Proof Polymer - Black
$4.34. This might suit your needs.
Rachael H - 8/12/2014
- LP15SB
Mike R - 03/13/2018
by: Mike R.03/13/2017
This part was perfect for my liscense plate for my trailer . Thanks
Comments
Not to good plate came undone and flew off my trailer . Had to buy another liscense plate .
Mike R - 03/13/2018
- LP15SB
by: Daniel09/02/2021
This metal plate bracket is well made and fits perfectly as shown on the video on my boat trailer. I love that they had the installation instruction video which helped me decide the purchase.
- LP15SB
by: Ted11/16/2021
Exactly as advertised. Sturdy metal br acket.
- LP15SB
by: Mike04/02/2022
Just what I needed and was delivered quickly. Will order something again if I need parts.
- LP15SB
Kenneth E - 06/22/2021
by: Kenneth06/20/2020
Products from etrailer are always good quality, thanks.
Comments
tires & wheels for boat trailer
Kenneth E - 06/22/2021
- LP15SB
by: Charles03/27/2022
Great quality.
- LP15SB
by: kenny04/22/2014
better than the cheap plastic bracket that came with trailer.
- LP15SB
Phil H - 07/18/2015
by: Phil H.07/18/2014
Great product at a great price. The quality is excellent, and was shipped out / arrived very quickly. Dealing with the eTrailer staff is always such a pleasant experience.
Comments
Product continues to perform as advertised after s year no problems at all. A sales experience with eTrailer is always positive.
Phil H - 07/18/2015
- LP15SB
by: Brent08/22/2021
perfect for holding a license and set of trailer lights on homemade trailer.
28
375
Show More Reviews
See what our Experts say about this Optronics Accessories and Parts
- Recommendation for a License Plate Bracket for a Small Cargo TrailerI believe I have just the right license plate bracket for you. Take a look at the Trailer License Plate Mount Bracket, # LP15SB. It is just a little over 8 inches long at 8-7/16 inches. It is 4 inches tall. The center to center distance between the center slotted holes is 2-1/4 inches but can be 2-3/4 inches apart at the outside edges. The top most set of holes are 2 inches apart on center. I have included a picture showing the dimensions for you.
view full answer...
- Angled License Plate Bracket Recommendation for a License Plate Collection DisplayI think a better option for you would be the Trailer License Plate Mount Bracket # LP15SB. This bracket has an offset that is pretty close to 90 degrees and since it is a metal bracket it can be bent to the desired angle if needed. You could also paint the bracket with spray paint if you wanted.
view full answer... - Stand Off Dimension of the Trailer License Plate Mount Bracket # LP10SBI went in our warehouse and measured the stand-off of the Trailer License Plate Mount Bracket # LP10SB that you referenced and found it to be right at 1/2 inch. The closest one we have with the 1-1/2 inches of stand off that you want is a metal one, part # LP15SB. This one has a 1-1/4 inch stand off dimension
view full answer... - License Plate Bracket for a 1992 Jayco Pop-up TrailerWe may not have the exact same license plate bracket as the one you lost on your Jayco trailer. But we do have quite a few that you could likely use. Bracket # LP15SB is an excellent choice since it is metal and would be more durable and would not cause ground problems (if the tail light grounds through the mounting studs). It mounts on holes that are 2 inches apart on center. If you happen to need a hole spacing that is 1-3/4 inches apart then you could use # LP20SB. I have included...
view full answer...
- Does Optronics Heavy Duty Trailer License Plate Mount Bracket # LP15SB Include HardwareThe Optronics Heavy Duty Trailer License Plate Mount Bracket # LP15SB does not include mounting hardware. You will need to re-use your existing hardware or choose new hardware. This plate mount is intended for full size license plates but you can check the included photo with dimensions to see if it will work to your satisfaction with a small plate.
view full answer...
- Legality of Operating a Car With the Rear License Plate Blocked by a Bike RackTypically a bike rack will not completely obscure a vehicle's rear plates, and in our customers' collective experience this has not been an issue for law enforcement. On the other hand, a fully-loaded cargo carrier WILL likely block a rear plate entirely and this might be an issue. I suggest you contact the State Police or Highway Patrol in the states in which you will be travelling and simply ask them about this concern. In states that do not require a front plate, there may be greater...
view full answer... - Can License Plate w 6 in Apart Mounting Holes Attach to License Plate Mount Bracket # LP15SBYes, the Trailer License Plate Mount Bracket # LP15SB that you referenced will allow a license plate with mounting holes that are 6 inches apart to be installed on it.
view full answer... - Would the Optronics Trailer License Plate Bracket part # LP15SB Replace a Wesbar 003201 BracketThe Wesbar license plate bracket part number 003201 that you referenced is a universal license plate bracket just like the Optronics Trailer License Plate Bracket part # LP15SB. To see if the mounting holes would line up check out the dimension picture I attached. If the dimensions don't match up you could still make the bracket work pretty easily.
view full answer...
- What are the Dimensions of Trailer License Plate Mount Bracket, # LP15SBThe Trailer License Plate Mount Bracket, # LP15SB, can be used as an exact replacement for the following parts: Uni Bond # LH1000Z Wesbar # 3203 Peterson # B428-09 Bargman # 30-72-100 I went out to the warehouse and took some measurements of the bracket so you could compare these to the original or to the area where the new bracket would be mounted. I did a little research and it appears that the license plate bracket on Nitro Bass Boat trailers is mounted behind the left tail light. Our...
view full answer...
- Dimensions of the Optronics # LP15SBThe Trailer License Plate Mount Bracket, Heavy Duty Zinc Steel # LP15SB is 1/16 inch thick. That makes it 16 gauge sheet metal. I've attached a photo with other dimensions that will most likely be helpful as well.
view full answer...
- License Plate Bracket Options For Tow DollyI recommend using a license plate holder like part # LP15SB. You would need to find a suitable place to mount the bracket and probably drill through the fender or the frame to install this bracket. This bracket does not come with mounting hardware. We do have license plate brackets that are designed to be used with tail lights. I have attached a link to our product page for the brackets we offer. You may find one that will work with the tail lights on your dolly.
view full answer... - Recommended Metal License Plate Bracket With License Plate Light Mounting Holes 2" On CenterFor a metal license plate bracket that will work with the 5-3/4" mounting holes and will still work with your license plate light that has 2" mounting holes you will want the Trailer License Plate Mount Bracket # LP15SB. The zinc plating will help to keep the bracket from rusting and is a great option for a boat trailer. I included a video of the # LP15SB for you to take a look at.
view full answer... - What's Easiest Hardware to Install License Plate BracketWhen installing a license plate bracket like the part # LP15SB the easiest way is with a nut, bolt, and a washer since they are easy to source, install, and do not require special tools like a rivet gun.
view full answer... - What Fascia Trimming is Required to Install the Draw-Tite Front Mount Hitch on a 2011 Chevrolet 3500The front fascia trimming that is required to install the Draw-Tite Front Mount Hitch on your 2011 Chevrolet 3500 is detailed in the installation instructions that I have linked for you. Basically, you will need to drill a square hole that is 3-1/4 inches by 3-1/4 inches. To begin measuring for the cutout, you will want to measure from the tow hook bolt center to the ground. Next, subtract 4-1/8 inches from that measurement, this will be the distance from the ground to the bottom of the...
view full answer... - Do Cargo Carriers Normally Obstruct Taillights and License PlatesThe Reese Carrier # 63155 that you referenced is 47 inches wide and should sit lower than the taillights of your vehicle (most likely). Mainly due to the width of this carrier it shouldn't interfere at all with the visibility of the taillights. You can measure the distance between your taillights to be certain. This carrier should sit lower and be too narrow to cause issue with that. Also, most likely the cameras that would take a picture of your license plate would be up above and the...
view full answer...
- Steel Frame License Plate Bracket Availability that is Compatible with LED License Plate LightIf you dont mind drilling a few holes you could get the LED Mini Trailer License Plate Light # LPL31CB to work with a Steel Trailer License Plate Mount Bracket # LP20SB. But I pulled both these products from our warehouse and the holes of these products do not line up, but if you used the # LPL31CB as a template you could drill the correct dimension holes in the # LP20SB above its current holes. Or you could check out the Optronics Heavy Duty License Plate Bracket # LP15SB. This has a...
view full answer... - Metal License Plate Holder and Bracket for a 2012 Karavan Boat TrailerMetal license plate bracket # LP15SB would be a good option. The top most mounting holes are 2 inches apart on center. I included a picture showing the dimensions. We also have steel cover # LP20SB. I have included a picture of its dimensions as well. Being steel, it would not be as corrosion resistant as # LP15SB. Aluminum bracket # CE26053A is another excellent corrosion resistant option. Its mounting holes are 1-1/2 inches part on center.
view full answer...
- Will Curt Aluminum Trailer Hitch Mount Cargo Carrier Fit 2007 Toyota Tacoma and Block License PlateFirst, to determine if the Curt cargo carrier # C18100 will fit your 2007 Toyota Tacoma you will need to take a measurement. Measure from the center of the hitch pin hole on the truck straight back to the distance required to clear the rear bumper. If that distance is less than 5 inches then the carrier will fit when folded up and down. When folded up the license plate will be blocked similarly to the way it blocks the plate on the Tundra in the video I have linked. You can relocate the...
view full answer... - Troubleshooting Turn Signals Not Working with Running Lights On on a Utility TrailerFirst, check the trailer wiring harness on your tow vehicle with a circuit tester, like part # 40376, and make sure all of the functions are working correctly without the trailer connected. Make sure to test with the running lights on and off to be sure. If it is not working correctly you will most likely have to replace the taillight converter. If it is working correctly, turn your attention to the trailer. It does sound like a weak ground, or a short circuit issue, because when you are...
view full answer... - Will the Curt Trailer Hitch Mounted Cargo Carrier # C18145 Fit a 2006 Acura MDXWith the Curt cargo carrier, # C18145, installed, you should not have any problems opening the rear hatch on your 2006 Acura MDX. To be certain, you can take some measurements. Measure from the top of the receiver opening up 5-1/2 inches, and then out 6 inches from the center of the hitch pin hole. This is where the nearest part of the carrier will be to the vehicle when installed. I have included some links on the Curt carrier for you. Given the position of the license plate holder on...
view full answer... - Is a License Plate Relocation Bracket Required when Using a Trailer Hitch Mount Cargo CarrierIf the cargo loaded on the etrailer Cargo carrier # e98874 come up to the bottom of the license plate on your 2014 Mazda CX-5 but do not block it then there shouldn't be any problems. You can add a license plate bracket to the back of this carrier using # LP15SB but you would have to drilling into the carrier. Otherwise you could just zip tie the plate to the back of the carrier but you would have to cut it off every time you were finished and it is not as secure as an actual bracket.
view full answer... - License Plate Bracket Needed for Wesbar Trailer LightsWe do have the Trailer License Plate Mount Bracket # LP15SB which was used when installing the Wesbar Submersible Lights # 403026 and # 403076 on a trailer. The mounting holes for the bracket are separated by 2" on center (see attached picture) which you can use to ensure that it fits your application. I have also linked the installation videos for the lights and bracket for you to check out.
view full answer...
- Will Bike Rack Obscuring License Plate be a Legal ConcernTypically a bike rack will not completely obscure a vehicle's rear plates, and in our customers' collective experience this has not been an issue for law enforcement. I suggest you contact the State Police or Highway Patrol in the states in which you will be travelling and simply ask them about this concern. In states that do not require a front plate, there may be greater sensitivity to the rear plate being obscured. You always have the option of relocating the plate if you prefer,...
view full answer... - Recommended Hitch Adapter To Use With Thule Bike Carrier And Provide Clearance For TaillightsUsing any adapters in the trailer hitch on your Rogue will reduce the hitch capacity by 50 percent. Since you are using your hitch for a bike carrier you may still be within the weight capacity of your hitch. If you have a 2-inch receiver opening I recommend an adapter like part # RM-076. This adapter offers a 6-inch rise or drop and may give you the needed clearance for your tail lights. We do not have an adapter with a rise or drop like this for a 1-1/4 inch receiver opening.
view full answer...
Do you have a question about this Accessories and Part?
Why etrailer.com?
At etrailer.com we guarantee:Highest quality accessories and parts for the best price.
Our Lowest Price Pledge ensures you will never overpay for the parts you need.Real product know-how.
We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.Most detailed, accurate accessories and part information available.
Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.Installations, made easy.
We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.Fast shipping.
Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.Personalized service for life.
We provide one-on-one, personalized service from the ordering process through the life of your product.Trusted since 1946.
We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.Returns Policy
Need to return an item? No problem. Please read our Returns Policy for more information.
Info for this part was:
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video Edited:
Dustin K
Installed by:
Cole B
Updated by:
Wilson B
Updated by:
Brian T
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.