An oval, black PVC grommet needed for flush mounting 6-1/2" oval lights. This PVC grommet gives shock mount protection that extends the life of the lamp. Along with the sealed light, a 3-wire pigtail is required to complete the installation.
Features:
Manufacturer Cross Reference
Grommet will work as an exact replacement for:
Wesbar # 226088
Truck Lite # 60700
Grote # 92420
Peterson # 421-18
Bargman # 40-06-020
Manufacturer Specifications
Black PVC grommet allows oval lights to be flush mounted. Provides shock mount to lengthen bulb life.
California residents: click here
Average Customer Rating: 4.8 out of 5 stars (643 Customer Reviews)
An oval, black PVC grommet needed for flush mounting 6-1/2" oval lights. This PVC grommet gives shock mount protection that extends the life of the lamp. Along with the sealed light, a 3-wire pigtail is required to complete the installation.Exactly what I needed.... I bent up my trailer light box when hauling a tractor, and got the back end of the trailer caught up in a ditch.... so I had the box cut off and a new one welded on.... the old light was broken, so I ordered a new one... as I wanted the same lights on both sides, I ordered two of them from etrailer, and now I'm back in business with the right lights on my flat bed. Fast shipping also was a plus! Thanks etrailer!
They seem to work well but do not fit as snug as the ones I replaced. I will add to my review after I take my horse trailer on very bumpy mountain roads and find out if they are going to stay put.
grewat product. easy plug and play for the torn light grommet I had
Great looking taillights wish I had bought them sooner. thanks
oval t - 03/21/2015These lights are well made and look great. They are a direct replacement for the older version I have. Tinted them to match the trailer. They were very easy to tint as the light surface is very flat.
Great product! My right brake/turn signal stopped working on my trailer, so I purchased a new ST70RB 6-1/2" oval trailer light, along with the wiring plug and this matching grommet, installed them in about 30 min, and it works great! The package arrived quickly and was packed nicely. I found out my fuse was blown on my 2016 Traverse for the right trailer stop/turn signal, but that was most likely from the old light which I think was leaking. I didn't know there was a fuse just for that so I learned something new. I will definitely purchase trailer products again from etrailer.com!
I purchased these Submersible LED bulbs for my boat trailer for two reasons. The first is so road traffic is aware of my intentions of backing up and the second is to make it easier to back my trailer into my driveway at night. The only thing that I find disappointing about this product, is that the wires are not sealed. You have to plug a pigtail in to power the bulb. Although they say it is watertight, I still plan on sealing the plug with some marine grade silicone sealant. Otherwise I am very satisfied with the way these bulbs light up my path of travel.
Used these grommets to install lights on my cargo trailer that I pull behind my motorcycle. I wanted lights that would be sealed from leaking and these grommets allowed me to do that. Easy to use and they hold the lights as expected. Will definitely use these again if I need a similar set up.
New grommet was a must when replacing new tail lights. Made instillation of new lights a breeze!!!
Everything was great. I wish you would ship
Your items I received were great. I wish you would ship UPS. USPS does not do a good job. Sits in their post office for a long time and I have to wait for the delivery.
Great product; easy install.
Excellent service, the right parts, and fast delivery.
Works great
I bought these not knowing I would need them. (My small utility trailer had rectangular holes for an older style light) I was able to use the rubber gaskets and the led light and some handy woodwork to make it fit my 1984 trailer these rubber gaskets are fantastic.
Fit well and came as advertised.
Lights fit perfectly, as did the grommets them self
On a road trip with motorcycle trailer and trailer light with grommet flew out after hitting pot hole..Replacement light and grommet fit and works great. The grommet could be a bit more snug but will watch on next trip. Thank you so much.
Fits the light perfectly.
Got grommet and led lights. A year later........Flawless stuff!!!
Mark K - 10/29/2021Gasket fit as original.
:I have a hitch platform bike rack, With bikes on the rack, particularly when they are covered, the car tail lights are not seen. I applied the Rola LED Light Kit for Railed Cargo Carriers to the Platform bike rack so that Tail lights, turn signals and brake could be visible. This adds Safety to driving as well as protection for the bikes.
Arthur D., the etrailer representative I spoke with, was well versed in etrailer products and was extremely helpful in getting my order organized and shipped. I was completely satisfied with my interaction with Arthur D and the company.
Perfect part for my needs.
I wish they had come with the recommended hole dimensions for drilling but they work great.
Rachael H - 06/22/2018Didn't fit the holes in my trailer, although LED lights fit and were same size as original. Measure the cut out in your trailer before ordering. Product was fine but my assumption was it was a standard size.
My fault - they will go in the trash now.
Do you have the part number from the old gasket? Should be molded on it somewhere. That may help shed some light.
-- Patrick B - 5/20/2013I would have to duck tape the back of the rubber grommet to keep the tail light in the trailer.
Sierra K - 07/01/2021
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Helpful Link
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.