Utility and Enclosed Trailer Tower Kit for Pack'Em Racks Qty 2

See what our Experts say about this PackEm Accessories and Parts

• Comparison of Packem Ladder Racks # PK-28WL2-BMH and # PK-28WL2-BM
  The difference between the Pack'em Ladder Rack # PK-28WL2-BMH and # PK-28WL2-BM has to do with the specific tower kit that is included with each set. The Pack'em Ladder Rack # PK-28WL2-BMH includes the Tower Kit # PK-BMH which is made of heavier gauge steel for more heavy-duty applications on an open trailer. They are simply designed to hold more weight. The Pack'em Ladder Rack # PK-28WL2-BM on the other hand includes the Tower Kit # PK-BM which is a lighter-duty set that's more designed...
  view full answer...
• Does Pack'Em Expansion Pack PK-OP2 Come with Tower Mounts
  The # PK-OP2 is designed to fit the part # PK-BM to complete the rack. It's an expansion rack which is why it does not come with the bars needed.
  view full answer...
• Mounting the Pack Em Ladder Rack to my Van.
  The Pack Em' Ladder Rack part # PK-28WL can be mounted to just about anything with the right hardware. Typically they are designed to attach to the Pack Em' Rails part # PK-BM In your case I would be concerned with the strength of the steel you were mounting to. If you were to reinforce those areas to ensure that your hardware would not pull out you can use them where you want. You will notice on these that there are brackets that point towards the mounting surface to go around the rails....
  view full answer...
• Can The Mounting Tabs Be Cut Off Of the Ladder Rack Bracket Kit For Packem Enclosed Trailer?
  The Ladder Rack Bracket Kit # PK-28WL is specifically designed to be used with Utility and Enclosed Trailer Tower Kit # PK-BM or Utility Trailer Tower Kit # PK-BMH. The tabs sticking out of the bracket kit are made to attach to the tower kits, so cutting them off could compromise the structural integrity of the brackets and I do not recommend doing so. That being said, it probably would not be very difficult to cut the tabs off with an angle grinder or similar tool. In regard to making...
  view full answer...
• Pack'Em Rack and Tower Kit for Open Utility Trailers
  Yes, the Shovel Rack for Pack'Em Racks # PK-23 is available along with the Pack'EmTower Kit # PK-BM to mount it to.
  view full answer...
• Dimensions of the Pack Em Shovel Rack Part # PK-23
  I went to our warehouse to pull get the Pack 'Em shovel rack # PK-23 to provide you some measurements. The outside diameter of the pre-cut holes is 2-3/8 inches and the internal diameter is 0.80 inches and can stretch to about 1.33 inches. The distance eye to eye is 4.36 inches or 4-3/8 inches. The height is 3-3/4 inches and the width is 2-3/8 inches. The length from either end to the center mounting hole is 13-1/8 inches. The overall length is 26-1/4 inches. If you need the tower...
  view full answer...
  
• Difference Between Pack'em Ladder Racks
  There is just one difference between the Pack'em Ladder Racks that you mentioned, which is the tower kits they come with, and that designates the type of trailer that they are designed to be used on, per the manufacturer. The towers have slightly different hole spacing and configuration depending on what they are designed for. The Utility Trailer Tower Kit # PK-BMH is designed for easy install on an open trailer with side rails and is included with the Pack'em Ladder Rack for Side Rail...
  view full answer...
• What is the Difference Between the # PK-BM-23 and the # PK-23
  The difference between the Pack'Em Shovel Rack # PK-BM-23 and the Shovel Rack for Pack'Em Racks # PK-23 is that the # PK-BM-23 comes with the # PK-23 and a Tower Kit # PK-BM. The # PK-BM is basically the foundation for the # PK-23 and can be ordered separately. If you do not already have a # PK-BM already you would want to go ahead and get the # PK-BM-23.
  view full answer...
• Can The Pack'Em Ladder Rack Bracket Kit PK-28WL Be Mounted to A Wall?
  The Pack'Em Ladder Rack Bracket Kit # PK-28WL is typically mounted on something like the Utility and Enclosed Trailer Tower Kit # PK-BM, but could be adapted to be mounted on a concrete wall. However, as these typically mount on a tower/post, they will need some modification to be able to do so. I included a picture of the brackets that will need to be removed if you choose to go this route. I do also have to mention that the included hardware will not be able to be used. With that said,...
  view full answer...
  
• How Does the Pack'Em Expansion Pack Part # PK-OP1 Install on a Trailer
  The Pack'Em Trimmer Rack part # PK-6S installs directly on the trailer's side rail (see photo 1). The Pack'Em Expansion Pack part # PK-OP1 installs on a set of uprights like the Pack'EmTower Kit for Pack'Em Racks part # PK-BM (see photo 2) so I am not really sure I understand what you mean. They do not attach to one another. Please let me know if you need further clarification.
  view full answer...
  
• Are Packem Trailer Rack Accessories Universal in How they Fit
  The Packem trailer rack accessories like the # PK-OP1 are designed to fit standard open trailers so that makes them very universal. To install this you'd need the part # PK-BM.
  view full answer...
• Can a Pack'em Expansion Pack be Installed on an Open Trailer with 4 Foot Tall Sides
  The Expansion Pack # PK-OP1 is designed to be used with a trimmer rack, # PK-6, or tower kit # PK-BM so you would first need to install one of those. Then the expansion would be added to it.
  view full answer...

Do you have a question about this Accessories and Part?