PVC Grommet for Peterson 6-1/2" Long Oval Trailer Lights - Flush Mount

Video Transcript for Detailed Breakdown of the PVC Grommet for Peterson 6-1/2" Long Oval Trailer Lights

Today, we're going to take a quick look at the grommet for Peterson 350-352-416-420 or 421 series trailer lights. This is going to be a black construction of PVC for our tail lights or our side marker lights, any of those series from Peterson. It does have a recessed mount design. And this just helps to give us a little protection to our light and overall just cleans up the look of our light itself.Now, I'm just going to pop in one of my 4-2-1 or 421 series lights from Peterson. And as you see, that's going fit really snugly around my light. It's going to keep it in place there and just helps to finish off that look and provide that shock absorption around the light, just helps to extend the life of that lamp a bit longer.

Again, it has that recessed mount design so this portion here is going be covered by your trailer, and all that's going to appear is that outer portion there.Now, the light and the harness for the light, those are all sold separately. You can find a lot of options here at etrailer.com, so definitely check out our selection of lights. To get the light off, it's going be the same process, just pop it out of place. And as far as our dimensions for the grommet is going to be 7-5/8 inches long and 3-3/8 inches wide and then 1 inch deep, going from the outermost edge to outermost edge. This product is also made in the U.S.A.And that's going to do it for a look at the grommet for Peterson 350-352-416-420 or 421 series trailer lights, in black PVC..