Replacement Right Thread Mounting Bracket for Phoenix USA Wheel Center Caps for 8-1/4" Axles

Video Transcript for Review of Phoenix USA Wheel Accessories - Replacement Right Thread Mounting Bracket - PHX67FR

Hi everybody, Andy here with etrailer.com. And today, we're taking a look at this replacement right thread mounting bracket for the Phoenix USA wheel center caps. Now, this replaces the bracket needed to install your Phoenix USA right thread wheel center cap for an 8 1/4 inch axle. It's designed to work with the center cap item numbers PXQ1020, PXQ2020, or the PXQ2020XL. All three of those center caps, we do sell separately on our website and can be found using those aforementioned item numbers. Now, this mounting bracket will secure on your axle hub plate using the existing hardware.

So, you would remove the two of the axle nuts and the washers that are on the axle end plate. Then, you would install this bracket with those two, with these two holes here right over those studs, and then reinstall the nuts and the washers to hold this bracket in place on your axle. The center cap then will just slide over the hub and it attaches to this bracket using a center cap attachment bolt, which usually comes with the center cap. Now, if you also need that attachment bolt, we do sell that part separately. You can find that on our website using item number PHX84FR.

The thread diameter for this mounting bracket is 5/8 of an inch. And since this right thread mounting bracket is the replacement from Phoenix USA, you can trust it is going to work with those models that we've mentioned of the Phoenix USA wheel center caps. Well, that's gonna conclude our look today. I do hope it was helpful for you. Again, my name is Andy, thank you for joining me..