Rear View Safety Trailer Tow Quick Connect/Disconnect Kit - 3 Camera Set Up

See what our Experts say about this Rear View Safety Accessories and Parts

• Recommended Backup Camera System for 5th Wheel Trailer Flat Towing Jeep Wrangler
  For your setup, I recommend the Rear View Safety Backup Camera System with Side Cameras # RVS-062710 and Quick Connect Kit # RVS-2133. This will give you two additional cameras to allow you to see the blind spots from your trailer better for turns and lane changes. I've attached videos to assist. If you just want to see the Jeep behind the trailer, then I recommend the Rear View Safety Backup Camera System with Trailer Tow Quick Connect Kit # RVS-770613-213. This will give you the connection...
  view full answer...
  
• How Does Furrion Vision S 3 Camera System Install on 2020 Jayco Redhawk 24B
  The Furrion Vision S Wireless RV Observation Camera System w/ 3 Marker Light Cameras # FR98NR is very popular mainly because it gives you side lights that also act as marker lights so they are a little hidden and the whole system just looks pretty sleek. The exact install can vary but typically you will just replace current lights with these cameras so that you have easy access to wiring connections. Attached is a sample installation that Shane did on a 2009 Forest River Cedar Creek that...
  view full answer...
• What Is the Pin Configuration on the RearViewSafety 2133 Quick Connect Kit
  I have attached a photo with the diagram of the pins on the # RVS-2133.
  view full answer...
  
• Recommended Camera System For 38 Foot Trailer And 2016 Chevy Dually
  For a complete view system, I will steer you away from a wireless system. Aluminum is rough on interference with a wireless system and you stated you want a clear view. I recommend the # RVS-6137Q to allow you 4 camera views without toggling channels. I recommend getting the two side cameras # RVS-775R and # RVS-775L that will give you 9 infrared illuminators and 120-degree viewing angle. These cameras come with 33 feet of cable each. I also recommend gettiing the Rear View Safety Trailer...
  view full answer...
• Can Additional Camera be Added to the Hopkins Smart Hitch System # HM50002
  The alarm on the Hopkins Smart Hitch # HM50002 that you currently have can actually be muted via the button on the lower right part of the monitor. I do have some options for you to utilize an extra camera but it will involve adding a new system or swapping out what you have since the Smart Hitch is only compatible with one camera. If you don't want to get rid of the Smart Hitch but you do want to add a camera to your trailer then a great solution for you would be the Rear View Safety...
  view full answer...
• 4th Camera Option for the Furrion Vision S Wireless RV Camera System
  The Furrion Vision S Wireless RV Observation Camera System, # FR98NR that you linked to comes with 3 LED waterproof cameras with night vision; 1 third brake light camera and 2 side marker light cameras that wire to your turn signals and of course the touch screen monitor which can has availability of a 4th camera. You can add a 4th camera with, # FCN48TASF and have it mounted anywhere. An alternative and my second recommendation, is the Rear View Safety Backup 4 Camera System # RVS-062710...
  view full answer...
• Rear View Safety Trailer Quick Connect Kit for Backup or Observation Systems
  We have two complete wiring options for you. The Rear View Safety Trailer Tow Quick Connect Kit For Backup Camera Systems # RVS-213-613 and the Rear View Safety Trailer Tow Quick Connect/Disconnect Kit - 3 Camera Set Up # RVS-2133. If you already have the wiring and just need the pigtail then use # RVS-213 for the pigtail and connectors.
  view full answer...
• Recommended Trailer Connector for 3 Camera Trailer Connection and Ford Monitor with RCA Inputs
  For your desired connection, I recommend the Rear View Safety Trailer Tow Quick Connect/Disconnect Kit - 3 Camera Set Up # RVS-2133 then use the Rear View Safety Multiplexer Box - 3 Channel # RVS-501N. This will give you the video output and the female RCA connections. If you need the RCA male you can use # RVS-RCA5-AM. You will need the Rear View Safety Splice Kit # RVS-SPK01 to convert from 4 pin to 5.
  view full answer...
• Is Drilling Required to Install Rear View Safety Backup Camera System w/Side Cameras
  The Rear View Safety Backup Camera System with Side Cameras # RVS-062710 comes with hardware to attach the cameras to the outside of the trailer. This would require drilling into the outer body of your Airstream. If you go with this system along with the quick tow # RVS-2133, I recommend putting a dab of silicone sealant # LT37464 at the holes so no water can get in. You would also presumably have to drill holes to run the wiring. The side cameras do have gaskets so you would not have to...
  view full answer...
• Recommended Trailer Backup Camera Wiring Harness and Connection for Truck Monitor
  The Rear View Safety Backup Camera System - Mirror with Monitor - Flush Mount Backup Camera # RVS-772718 is a great option for your F-350. To use this system with a trailer camera, you will also need the Rear View Safety Trailer Tow Quick Connect/Disconnect Kit # RVS-213 for a single camera or Rear View Safety Trailer Tow Quick Connect/Disconnect Kit - 3 Camera Set Up # RVS-2133.
  view full answer...
• Recommendation For 4 Camera Monitoring System For Truck And Trailer
  For the Rear View Safety Backup Camera System - 4 Camera Setup - Quad View Monitor # RVS-062710, the two rear view cameras are identical. They both have a 130 degree viewing angle and 50 foot infrared night vision. I recommend using this system with the Rear View Safety Trailer Tow Quick Connect/Disconnect Kit - 3 Camera Set Up # RVS-2133. This system is hardwired, so if you want to add another camera, that would include another camera as they can't just be moved easily. You can add...
  view full answer...
• Recommended Quad View Monitor With Side View Cameras And Rear Camera Options With Tow Connection
  We installed the Rear View Safety Backup Camera System - 4 Camera Setup - Quad View Monitor # RVS-062710 on a coach a few months ago and it was really cool. This kit includes the 2 side cameras and the two back up cameras which all have the infrared function for night. This has all the cables needed as well. You can customize a system if you want specific cameras with the # RVS-6137Q. I recommend getting the two side cameras # RVS-775R and # RVS-775L that will give you 9 infrared...
  view full answer...
• Recommended Four Camera Wireless Camera System With One Monitor For Truck And Trailer
  For a Wireless 4 Camera System, I recommend the Rear View Safety Wireless Backup Camera System - 7" Quad View Display with Built-in DVR # RVS-4CAM. If you have any aluminum in your trailer system, it can cause interference to wireless connectivity so if you have an aluminum trailer, I recommend you go with a wired system. For a Wired 4 camera system, I recommend the Rear View Safety Backup Camera System - 4 Camera Setup - Quad View Monitor # RVS-062710. For a tractor trailer, I recommend...
  view full answer...
• Rearview Safety 4-Camera Systems and Wiring Installation
  We have not had anyone complain about the cameras in system # RVS-062710 becoming foggy and unusable as a result. This particular system comes with quad view monitor and 4 camera inputs. There is only one power wire that will need to be installed for the whole system. The cameras do not require their own power wires. I have included a diagram showing how the 4-camera system wires up. This is compatible with the Quick Connect Trailer Tow Kit # RVS-2133.
  view full answer...
  
• Recommended Camera to Mount on Trailer for Highway Rear Viewing
  I have the perfect solution for your towing situation! I recommend going with the Rear View Safety Universal Backup Camera System # RVS-770619N. It comes with a 7" monitor that replaces your current rear view mirror. The monitor can also be used as your normal everyday mirror due to the material of the screen. This comes with one camera and 66' of cable. Simply connect the power to a circuit that either turns on when your Ford Focus is started, or that is connected to the running lights...
  view full answer...
• Recommended Back-Up Camera Compatible with 2018 Ford F-150 Tailgate and Monitor for 5th Wheel
  It sounds like you want to use the factory monitor which is where things get a little more difficult, but there is a way. You can use the Truck Bed Cargo Camera for 8" Factory Monitor - Switch Kit # 3460001 to get the factory wiring connection and switch that aren't available anywhere else. Then use the Rear View Safety Adapter Cord - 5 Pin Male to RCA Male # RVS-RCA5-AM, the Rear View Safety Female Power Cable Item # RVS-RCA-P, and the Rear View Safety Camera Extension Cable - 26' Long...
  view full answer...
• 4 Camera System Needed for a 2014 Ram 2500 Towing a 2014 Durango Goldrush
  We have exactly what you are needing! You will need to start off with the Rear View Safety Backup Camera System # RVS-062710 which gives you 2 rear cameras and 2 side view cameras. I recommend adding the quick connect kit # RVS-2133 for a towing application.
  view full answer...
• Can a Different Camera System be Used for a 5th Wheel that has Furrion Camera Wiring
  You can definitely use a different brand of backup camera for your 5th wheel, you will just need to do some basic modifications on your end. The Rear View Safety Backup Camera System # RVS-062710 is a popular item especially when used with a quick connect kit # RVS-2133 for easy connecting and disconnecting from your tow vehicle. To modify your trailer you would need to remove the mounting bracket and then find a way to splice into the wiring and connect the other camera.
  view full answer...
• Recommended Quad View Camera System For Ford F250 Camera And Side/Rear Cameras For 20ft Cargo Hauler
  We have exactly what you are looking for. I recommend the Rear View Safety Backup Camera System - 4 Camera Setup - Quad View Monitor # RVS-062710 along with the # RVS-2133 for quick connect/disconnect to your 20 foot cargo hauler. This system will give you the camera for your F-250 and the two side and rear view cameras for your trailer all with the ability to see all 4 cameras at once or individually. This has a 7 inch monitor and the cameras have the infrared so you can see clearly...
  view full answer...
• Back-Up Camera System for Rear of Trailer
  A camera system on the back of your trailer is a great idea an I highly recommend the Rear View Safety Backup Camera System with Side Cameras # RVS-062710. It has a backup cameras that has a viewing angle of 130 degrees and and will even give you infrared night vision up to 50 feet; the side cameras have a 120 viewing angle and 30 feet of night vision. The cameras are also rated to prevent any damage from moisture and has a 20G impact rating. I also recommend using the Trailer Tow Quick...
  view full answer...
• Parts Needed to Add a 4 Camera System to a 2016 Ram 2500 Using a Rear View Mirror Monitor
  We do have a system that will allow you to mount 4 cameras, 3 on your trailer and 1 on your 2016 Ram 2500, and see them through a rear view mirror monitor. The Rear View Safety Universal Backup Camera System # RVS-770619N has a 7" monitor that clips on to your existing mirror. It comes with a box that allows up to 3 camera inputs. To connect a 4th camera you simply need to splice the wiring from one of your cameras to another one. I recommend splicing the cameras on the sides of your trailer...
  view full answer...
• RV Camera System That Works with Wiring on 2015 Forest River Cherokee Grey Wolf Travel Trailer
  We can help you choose a camera system to make travel in your Grey Wolf trailer a bit less stressful even if that camera cannot use the existing wiring socket in the trailer. For maximum safety and visibility the item I suggest is the Rear View Safety camera system # RVS-062710. This complete 4-camera set-up include two side cameras to make it easier to pass other vehicles and to position the trailer properly at your destination campsite. This also includes two heavy-duty backup cameras....
  view full answer...
• Recommended 4-Camera System for a 2015 Heartland Cyclone 5th Wheel Trailer
  I do have a solution for you, but I am not sure if your 2015 Heartland Cyclone already comes pre-wired for a camera system so I wouldn't know if there are specific connectors. The camera system that I recommend installing on your Cyclone is the Rear View Safety Camera System # RVS-062710 which comes with 4 cameras and then a quick connect kit # RVS-2133. I recommend connecting the 2 cameras on the side of your 5th wheel trailer to the same circuit so that you can utilize all 4 cameras. An...
  view full answer...
• Can Furrion Vision S Wireless RV Observation Camera System Be Used on a 40' Towable RV
  The Furrion Vision S Wireless RV Observation Camera System w/ Side Marker Light Cameras # FCE48TASL-05 is a fantastic system unless you have a longer RV like we find in your situation. It will work-ish but since there isn't a transmitter we need to look at a wired system to ensure you get a consistent signal so you can safely navigate traffic. For this I recommend Rear View Safety Backup Camera System - 4 Camera Setup - Quad View Monitor # RVS-062710 along with the Trailer Tow Quick Connect/Disconnect...
  view full answer...

Do you have a question about this Accessories and Part?