Arrives before Christmas To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Install your Redarc Tow-Pro electronic brake controller (sold separately) quickly and easily with this custom wiring adapter. Plug one end of the adapter into your Tow-Pro brake controller and plug the other end in beneath your vehicle's dash.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Brad Hello neighbors. It's Brad here at etrailer. And today we're taking a look at the vehicle-specific wiring harness, that will work in conjunction with the Tow-Pro Elite electric trailer brake controller. These harnesses are going to be great to work with your Tow-Pro Elite in a variety of different trucks and SUVs. Now, make sure that you get your vehicle-specific harness. You're going to want to use our fit guide on "etrailer.com", and that's going to make sure that you get the right harness, and that way your install goes nice and easy.
Included in the REDARC kit, you will find this plugin adapter, and this is going to have these spliced ends, and you're gonna have to tie into your brake signal, your brake output, your power output and your ground. Now, if you are pretty handy with electrical, that's awesome. That's great. You can use this. But I'm the kind of person, plug and play in OEM kind of setup or really nice factory one like this.
This is the vehicle-specific harness. So this ties in directly to our factory tow system, and clips right in, it's got this nice braided sheathing on it, to kind of protect the wires, and then it plugs directly into our module here. So, to save yourself a little bit of headache and time, and make the install go that much smoother, and not have to worry about loose connections, I highly recommend getting the vehicle-specific harness. So this end of the plug is specific to your vehicle. As you can tell, it looks like the factory plug, it fits in perfect, has the locking mechanism, so you aren't gonna have to worry about loose connections happening with your plug, and it's going to make install a lot easier.
And that was a look at the vehicle-specific harness for the Tow-Pro Elite electric trailer brake controller..
Average Customer Rating: 4.8 out of 5 stars (270 Customer Reviews)
Install your Redarc Tow-Pro electronic brake controller (sold separately) quickly and easily with this custom wiring adapter. Plug one end of the adapter into your Tow-Pro brake controller and plug the other end in beneath your vehicle's dash.
I ordered this unit but had it professionally installed on my 2021 Nissan Frontier. My installer said everything was perfect with the installation. It did not take him long to install it.
Clean install. I really like these Redarc controllers. 2021 Nissan NV 3500 Passenger. etrailer kit with controller and wiring adaptor was just the thing. Under dash drill access for mounting the module isn’t ideal, but doable. Great kit and great price. Looks great
The install was straight forward. Being my second time I was able to install the controller easily and without much complication. I have both a Nissa Pathfinder and Armada, which made the installation easier since both models are similar. The product responds well, still trying to dial in the perfect breaking level.
Worked like a charm! Love the service level of etrailer.com. The how-to videos are excellent and makes any job so much easier. Especially for this 53 year old lady! I would definitely consider this company a female friendly business.
One year in and only have use the controller a few times camping. Installed on a 2022 Nissan Frontier Pro4X. Really like the way the brake controller worked. Easy to install and set up and very adaptable to changing conditions. I had a problem with my truck battery dying and realized that the Redarc brake controler was causing a parasitic draw so it had to be disconnected. The truck was brand new and the issue resolved as soon as the controller was disconected. I wrote a letter to etrailer explaining the issue however they did not offer any solution for me so I am stuck with a controller that may not be usable. Going camping for first outing this year in a couple of weeks so I will hook it back up and see if the problem returns. So I would rate excellent for how it works but poor for the issue it caused. For now I would have to be generous and give an average rating all things considered. I was disappointed that eteailer didn't offer a replacement. I will be camping with an extra battery on board just in case.
Jenny N.
11/2/2023
I want you to be able to use the controller with confidence and without draining the battery. I reached out to RedArc about the battery problem that you have been having with the controller. They had additional questions to ask about the controller with performing a few more current draw tests. Would you be able to use a multimeter to measure the current-draw through the Black wire to the unit? This would help to show if the TowPro is using more power than it should be. If it is then it can definitely be replaced under warranty, They also wanted to see if you could grab the serial number from the side of the main unit. With this information we can get you taken care of.
This harness makes the install a plug and play process. Just can't beat that !
Richard
4/15/2024
Not much else to say about a harness except that it fit perfectly and made the electric brake control install easy as can be.
Bud M.
5/13/2024
Excellent unit, work as advertised. Plug and play and excellent results. I was able to place the unit behind the console so only see the controller knob.
Recommended for sure. Installed in an XTerra 2013 Pro-4x.
Good adaptor.
Sergio
8/11/2024
Working great
This made life so easy. Just like it is stated plug and go
Great plug and play
Fits as should in the 2023 Nissan Frontier. If you have the factory tow package the plug is on the far left under the dash easy to get to.
This Redarc wire harness is expertly constructed and makes installation of the RedArk trailer brake controller a breeze!
Exactly what i was looking for, discreet, not a box hanging from the dash.
Doug
5/6/2024
Worked great, still works as expected
Made installation of the Redarc brake controller easy and fast.
Bobby Q.
7/26/2023
After a year, still working great
Have had the chance to use this several times over the year. Install was very easy even though the previous owner cut out the factory plug. Easy to operate and know that it's working with the different color lights on the dial.
Great experience!!!
I have ordered from etrailer twice and both times I received exactly what I needed and the installations were easy!!!
great harness. Allowed me to install the contoller in 15 minutes. Has worked flawlessly.
Nicholas
9/4/2023
Great accessory that saved me lots of time no wiring was necessary. This harness was not available on other sites that were selling the controller. Delivery service was excellent and the controller and harness have been working for over a year flawlessly.
Put it on a camper and it is doing its job..
Installed in my 2021 Frontier. There is a round knock-out plug where the ignition/key fits on previous models, so it was easy to mount the switch there. Fastened the controller to the sidewall under the dash, behind and to the left of the diagnostic port. A couple of zip ties and done. The hardest part was drilling holes for the control knob.
This is required and vehicle specific for the Redarc Tow-Pro Trailer Controller. Follow the instructions and everything fits and works as it should. Helped to view instructional Video on etrailer website at time of ordering
Terrence C.
1/17/2022
The led light doesnt shine through very brightly as I adapted one of the spare knockout plates to mount the control knob. Regardless the controler is doing what its supposed to do.
This totally did what it was supposed to, I recommend it
E-trailer needs to include the knockout holder for the knob in the standard offering for the Frontier. Most of the time spent installing was carving on the factory supplied blank. I would have gladly paid for the click-in holder which I thought came with the custom plug-and-play harness. Otherwise, it was super easy, thanks to Nissan supplying the harness connections. The panel removal was easy enough with just one screw to remove.
Very simple install. Worth the money.
Nice setup, easy install. Received a faulty controller and etrailer made it right and quick!
Plug and play literally !!!
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Chuck
7/25/2024
After using this unit for a year. I am still very satisfied. It works without me worrying about it. Yes, I would buy it again.