Expand your portable Redarc solar array with an additional 200-watt panel to charge your batteries faster and enjoy an off-grid campout longer. Connects to your solar setup with Anderson connectors.
Features:
Specs:
Add another Redarc solar panel to your portable solar system to increase your charging power and extend your off-grid campout. Multiple-panel solar arrays are most efficient when you use panels with the same wattage, so we recommend adding this to a system with other 200-watt panels. Be mindful of the amperage and wattage limitations of your solar charge controller, as exceeding those limits may cause the solar array to not function.
Redarc offers multiple options for connecting multiple panels. It's important to understand what effect they will have. If you are unsure of what would work best for you, you should consult an electrician or dealer for professional advice and installation.
Redarc offers Anderson connectors to wire panels in series (RED53VR) or parallel (RED59VR). By wiring your panels in series, you will increase the total panel voltage output. By wiring your panels in parallel, you increase the total amperage. In both cases, you get increased battery charging power going to your solar charge controller. If you increase your total voltage or amperage beyond what your charge controller can handle, it will not function properly. In solar arrays of 4 or 6 panels, you can wire half in series and half in parallel, so neither the volts nor amps exceed your controller's limitations. By being mindful of these options, it can save you the pain of having to buy a more expensive solar charge controller that can handle the increased input.
The durable, padded carrying case has a soft interior to help protect your panel during storage and transport. An opening at the top allows you to carry the panel with the integrated handles attached to the panel. You can also conveniently stash your cables in the zippered pocket on the back.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody. This is [email protected]. Today we're gonna take a look at this RedArc 200 watt portable mono crystalline solar panel. You can see this panel comes folded for easy transport and storage, in this nice heavy-duty nylon bag. Basically you just zip it down on each side. So if we zipper this all the way open, and then take it down on the other side, you can see that the bag will open, and then you'll have access to your solar panel.
The panel unfolds, and then I'll show you the folding legs that you use to support it, and just pull the bag back up here. So basically, all you have to do is unfold it just like that. When you put it down you'll notice there's legs here that are clipped in place. It'll just fold out like that, and right here, fold them up just like that. And then all you have to do, let's see if we can lift this baby up, and then get those legs folded out.
You can see that you can put it down, and you can adjust it to whatever angle you want, but you can see right now how it holds it in position. This is a nice portable 200 watt solar panel. Uses the sunlight to charge your batteries. It says designed for portable use with your RV, your van, or anywhere else you'll need solar power. What's nice about portable, if you're only traveling a few times a year and your priority is the ease of use, value, flexibility, the portable folding solar panels are a great option.
These are the next generation folding solar panels, which give you a nice small, ultra light weight solution. Makes it very quick and easy to set up and pack down, as you just seen, how we open this up, and you're ready to set it up. They are up to about 50% lighter than other popular panels that are on the market. This one here weighs about 21 pounds. Now this one is the 200 watt version, and it is also available in 120 watt version.
We do sell separate on our website, and what's nice due to their high portability, they're quick to move. So you can just make the most of the patchy sunlight. So if you need to turn it, you can just pick it up and move it to wherever you need it. So it makes it very flexible. Now I mentioned it as a mono crystalline solar panel. Has the high efficiency rates that are typically in 15 to 20% range, and the high efficiency rate means they'll produce more power per square foot, and they're therefore, very space efficient. These portable ones have an ETFE coding, which will protect the solar cells from any damage, withstands high temperatures, and allow maximum amount of solar energy to penetrate the cells. I'll show you on the back again, the connections here. You just fold those legs back down, clip them into those little places they clip into. If I zoom in, you might be able to see here, If I slide this just a little bit, you'll be able to see the junction boxes right here, and then they use the Anderson connectors. Which provide a nice, easy plug and play set up. These are designed to work with RedArcs solar charge controllers, RedArc dual input BCDC chargers, and RedArc manager 30 battery management systems. Those we do sell separately on our website. A few dimensions on this, let me zoom back out, lift it back up. Very durable hinges on the middle here, but basically this is in the open position. So the length from this end to this end is going to be 54 inches long, the width, 31 and a half inches wide, and fully opened they're only about an inch wide. Now if we close it, pretty much rotate this and close it up, and just like that, length is going to change to 27 inches long. The width will stay the same, 31 and a half inches wide, and it's about two inches tall now that you close it together. And again, it's very easy to handle. What's nice, is this case we showed you, it is a nice strong nylon, padded case. It is padded for easy transport, storage, and protection. The built-in handle on the solar panel makes it fairly easy to carry the panel around when it's stored. So basically, if we just put it back in that bag, zip it all the way up on that side. Get the zipper, make sure it's in the bag, zip it all the way up on this side, and you can see with that handles sticking out, makes it easy to carry. Also what's nice, let me flip it around to the back here and show you, I have a nice zippered pouch that almost goes the whole length, that you can actually put your cables or your connectors all in there, and keep it all together to store it. A few specs on this, the rated peak power is 200 Watts total. So it's two by 100 Watts. Each panels a hundred Watts and there's two panels. Total of 200 Watts. Max system voltage, 600 volts DC. Max power current, 10 amps. Maximum power voltage, 20 volts. And the operating temperature range for the solar panel is negative 40 degrees Fahrenheit to 180 degrees Fahrenheit. Does come with this nice user's guide. That'll describe how this hooks up, very simple hookup, and how it operates. But that should do it for the review on this RedArc 200 watt portable mono crystalline solar panel..
Average Customer Rating: 5.0 out of 5 stars (3 Customer Reviews)
Expand your portable Redarc solar array with an additional 200-watt panel to charge your batteries faster and enjoy an off-grid campout longer. Connects to your solar setup with Anderson connectors.Works great. Very portable durable.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.