bing tracking image
  1. Accessories and Parts
  2. Redline
  3. Wiring
  4. Wire Connectors
  5. Quick Splice Connectors
  6. 12-10 Gauge
Quick Splice Wire Connector - Yellow - 10-12 AWG (Qty 1)

Quick Splice Wire Connector - Yellow - 10-12 AWG (Qty 1)

Item # 562
lowest price pledge
Our Price: $1.79
Accessories and Parts
Orders above $99 qualify for Free Shipping
Shipping Weight: 0.02 lbs
Quantity: 
In Stock
Redline Wiring - 562
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Need help with installation?
Locate installers near me
1-800-496-5010 to order Redline accessories and parts part number 562 or order online at etrailer.com. Free expert support on all Redline products. Guaranteed Lowest Price and Fastest Shipping for Quick Splice Wire Connector - Yellow - 10-12 AWG (Qty 1). Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (30)
  • Q & A (0)
  • Photos
  • Why etrailer?

Redline Accessories and Parts - 562

  • Wiring
  • Wire Connectors
  • Quick Splice Connectors
  • Redline
  • 12-10 Gauge


  • Makes connecting two wires quick and easy - no cutting, soldering, or splicing
  • Fits 10-12 gauge wire


562 Quick Splice Wire Connector - Yellow - 10-12 AWG (Qty 1)






Customer Reviews

Quick Splice Wire Connector - Yellow - 10-12 AWG (Qty 1) - 562

Average Customer Rating:  4.8 out of 5 stars   (30 Customer Reviews)


by:

Quick delivery. Redline 12-10 AWG Quick Splice Wire Connectors are a much better quality than the ones I had purchased at an auto parts store, better stronger construction. I will use to splice a 10 gauge charge wire with another 10 gauge wire when installing an electric tongue jack. The trailer battery is at the rear of the trailer in a small enclosed box so a 18 foot 10 gauge wire would have had to be run under the trailer to the battery, and the Quick Splice allows me to splice into a much closer portion of the charge wire to get power for the jack.




by:

The product is a simple well made connector. Use dielectric grease when you put them together and your connection will last much longer than without the grease. But the best part is the always spectacular all-around service from etrailer from comprehensive tutorials and reviews to the excellent shipping services. And the prices are good. It's what online retailing should be like in the perfect world. My humble opinion.




by:

connectors and breakers to hook up my brake controller arrived in order, installed easily, and lasted 1 year so far...




by:

The brake assemblies I received seem to be just fine. They were a good fit on my trailer. Haven't completed the job yet to try the brakes out, but they look great. All my other parts were correct and very well packaged. I really appreciate the great customer service. These guys seem to really care.




by:

Ordered several electrical connectors,wire and a wire tester .. all items came in good condition ,looking forward to using the tester as soon as I can I am sure it will do the job.




by:

Products were great for my application and the folks at etrailer helped by make the right decision with the products I purchased....completely satisfied. Great job.




by:

all products worked fine. technical support used on another project was helpful will use etrailer for future needs thanks




by:

Every item I ordered worked and fit exactly as I had hoped it would. Prices and shipping was top notch and will definitely buy from e-trailer again.




by:

Delivered in timely manner. Haven't installed yet but after watching videos looks very simple and straight forward.




by:

OK splice connectors. Works well but hard to close connector. It would be great to have a tool other than pliers to close connector on wires.




by:

I modified the work plan after I ordered the parts, some of the components were used as expected and the other item were found to be valuable for other projects. The website and Ellen N were incredibly helpful.




by:

Bought in conjunction with other items to rewire trailer.
Worked as advertised.
Speedy delivery.




by:

What can I say - it still have brakes and lights!




by:

I can't really give you a review, because I purchased them, but didn't use them.
They looked well made, but I decided to do the wiring in a different way


Comments
Everthing is as good as the first day. Thankyou
Roger F - 08/17/2018


by:

etrailer did it again. Great selection, great price and great customer service.




by:

WORKED LIKE IT WAS SUPPOSED TOFANTASTIC INVENTION




by:

What can i say, its a splice connector




by:

Makes splicing wires a breeze.


Comments
Everything is working great. Your parts helped me put a nearly new, yet fender-bendered, trailer back together for a very reasonable price. It rolls down the road great!Ill probably be contacting you all again in the near future for a wiring harness for a trailer brake controller on my new-to-me F250 when the weather finally decides to dry out a bit!.
Ryan R - 03/20/2018


by:

Correct parts and great service


Comments
No problems and easy to use
Joaquin - 09/11/2017


by:

Good quality, great service.




by:

Excellent customer service and fast shi pping.




by:

Poor quality




by:

Everything came super fast and each item was as discribed. Thank you




by:

These work great. Strong hold and easy to use.




by:

High Quality.



25
30
Show More Reviews

See what our Experts say about this Redline Accessories and Parts



  • How to Tap Into 3rd Brake Light Wire on 2005 GMC Sierra
    We do not have OEM type vehicle wiring connectors but you can make a spliced connection to your 2005 Sierra's 3rd brake light wire using a Quick-Splice connector such as # 562. These allow you to tap into that vehicle wire's brake light switch signal which is sometimes required for hardwired brake controller installations.
    view full answer...
  • Is Redline as Good as 3M
    While I can't address why we carry some products and not others what I can tell you is that the Redline Quick Splice Wire Connector # 562 you referenced is absolutely comparable in quality to the 3M we carry in the higher gauge. If you take a look at the reviews for part # 562 you can see our customers who have used it have had no qualms with it.
    view full answer...
  • Finding 12v Constant Power Wire On A 2002 Chevrolet Silverado
    The most common way to get power from the rear of your vehicle is to get it from the running lights. Go to your lights in the back and start your truck. Test to make sure you have the running light power wire and splice into it using this connector # 562. That's perfect for your backup camera because you're not pulling power from the front of the vehicle and having to run all that wire back to the camera.
    view full answer...
  • How To Install a Trailer Wiring Harness to a 2011 Toyota RAV4
    You will not want to connect your trailer wiring directly to the wiring harness of your 2011 Toyota RAV4. You will need to isolate the trailer wiring from the vehicles sensitive circuitry, so it does not put a strain on the system and cause your vehicles wiring harness to be overloaded and fail. I would recommend to use the Tow Ready T-One Wiring Harness, part # 118412. This wiring harness will plug into connectors located behind the vehicles tail lights and comes with a powered Modulite...
    view full answer...
  • Installing Trailer Brake Controller on 2012 Monaco Knight Motorhome
    Based on my research, it looks like your 2012 Monaco Knight Motorhome is built on the custom-built Roadmaster Chassis. We do not currently have a plug-in wiring adapter available for your RV, however there should be a built-in harness next to the air brake pedal. You will just need to connect the wires from the brake controller pigtail to this harness. I highly recommend the Tekonsha Prodigy P2 Trailer Brake Controller # 90885. This is a great proportional controller that will activate...
    view full answer...
  • Installing Tow Ready 4-Way to 7-Way Trailer Wiring Adapter # 30717 On A 1995 Ford F250
    The 4-way connector on the Tow Ready 4-Way to 7-Way Trailer Wiring Adapter, part # 30717, will connect to the 4-way already on your 1995 Ford F-250. You will need to run the blue wire on the adapter up the truck and connect to the brake output wire on your brake controller, usually also blue. You can splice into the blue wire on your brake controller wiring harness using the quick splice 10-12 gauge, part # 562. I am including a video link of how the quick splice is connected. The remaining...
    view full answer...
  • No Power To Reverse Lights On Trailer
    In this senario, I would run a wire from the center pin of the 7-way to the reverse light circuit on your truck. This will enable you to bypass the fuse. Because of this direct connection you should be able to back up without your trailer brakes engaging. It is best to use a quick splice like part # 562 to tap into the circuit after probing the wiring for the reverse light with a tester like part # 40376. This bypasses your issue but doesn't actually fix the problem of not getting power...
    view full answer...
  • How to Wire up a Camper Shell on a 2004 Dodge Ram 2500
    To wire the third brake light of your camper shell on your 2004 Dodge Ram 2500 you will need to find the CHMSL circuit. This will be the circuit that will only carry voltage when the brakes are applied and would not blink with either blinker. This circuit is located behind the spare tire, slightly to the left. There will be a white wire with a brown/tan stripe that is capped and outside the harness. This will be the correct wire to use. Now to wire up a dome light you will need to find...
    view full answer...
  • Will Race Ramps RR-56-2 Work with C7 Chevy Corvette Stingray
    The Ramps part # RR-56-2 should work for your 2014 Chevy Corvette Stingray, but you can pretty easily measure to find out. If you check out the attached picture you can see how to use a yardstick to determine if it will fit. The other option is 3 feet on a straight edge (3 feet in a yard) and use that is you do not have a yardstick. We had a customer with a Corvette (didn't specify year) that only had 3 inches of clearance from the ground and these work just fine.
    view full answer...
    Image 1 for
  • Camper Shell Lighting for 2003 Dodge Ram 2500
    The wiring of a camper shell on a 2003 Ram 2500 would basically be the exact same as the 2004 model. To wire the third brake light of your camper shell on your 2004 Dodge Ram 2500 you will need to find the CHMSL circuit. This will be the circuit that will only carry voltage when the brakes are applied and would not blink with either blinker. This circuit is located behind the spare tire, slightly to the left. There will be a white wire with a brown/tan stripe that is capped and outside...
    view full answer...
  • Can Second Switch be Added to Lippert Slide Out on RV
    Yes, if you wanted to add a second switch with the part # LC117460 to your slide out setup you can wire this switch to the same wiring as your current switch and it will function just like your current switch as it will complete the circuits in the same way. Since the wiring is 12 gauge you can use the 10-12 gauge quick splice part # 562 to easily tap into the same circuits
    view full answer...
  • Brake Controller and Wiring Recommendation for 2008 Monaco Knight Motor Home
    Let's start with the brake controller. My personal recommendation is for the Tekonsha Prodigy P3, # 90195. This is a customer favorite because of how easy it is to setup and how well it works. Now for the wiring. Although your 2008 Monaco Knight motor home is pre-wired with a plug for a brake controller, I do not have a wiring harness with plug that has been confirmed to fit. In this case I recommend using Quick Splice Wire Connector, # 562, to connect the wires from the controller's pigtail...
    view full answer...
  • Should Quick Splice Connector 562 be Sealed if Used in Marine Application
    If you use a quick splice like the # 562 you would want to heat shrink it or use the waterproof tape like part # DW04367.
    view full answer...
  • Quick Splice and Circuit Tester for Tapping into Vehicle Reverse Light
    None of the trailer wiring harnesses we offer are designed to tap into the circuit you need. Only option would be to use a quick splice like part # 562 to tap into the circuit after probing the wiring for the reverse light with a tester like part # PTW2993.
    view full answer...
  • OEM-Style Trailer Wiring Harness for 2011 Nissan Rogue SV
    We do offer a custom 4-pole trailer wiring harness for the 2011 Rogue that plugs in at the tail light assemblies, part # 118480 from Tow Ready. This product wires in to your Rogue at a different point than the OEM harness which we do not offer. I have linked an installation video showing the process in a 2011 Rogue. The Tow Ready harness does require a 12V power input to its red wire (made through the included wire and fuse holder). Normally this wiring connection is run up along the vehicle...
    view full answer...
  • Wiring Reverse Light Circuit to 7 Way Connector on 2016 GMC Terrain
    The center pin of a 7-way is typically the reverse light circuit. You'd need to tap into the reverse light circuit of your 2016 GMC Terrain to activate it. For a quick splice for 14-18 gauge wire you'd want # SWC501746-1 or for 10-12 gauge wire # 562. I'd recommend strongly that you run the 12 volt power wire back to the positive post of the battery and not to a 12 volt outlet to prevent shorting out that circuit.
    view full answer...
    Image 1 for
  • Can I Install the Prodigy P2 Brake Controller in A 2005 Saturn Vue and a 2008 GMC Sierra
    Moving your Prodigy P2 brake controller, item # 90885, to your 2008 GMC Sierra truck will require that you have a Replacement Brake Control Plug-In Harness, item # 20127, installed on the GMC Sierra. We have a video detailing the installation of this harness for you to review. The P2 and the Voyager are wired the same. The white wire is ground, the black wire is power into the brake controller, the red wire is the stoplight switch circuit and the blue wire is the output for the electric...
    view full answer...
  • Will The Installation Of The Curt 4-Way To 5-Way Adapter Affect My Vehicles Reverse Light Function
    This is going to be a straight forward installation. You will not lose any functionality in your reverse lights. You will have to splice the reverse wire from the Curt Trailer Connector Adapter - 4-Way Flat to 5-Way Flat - Vehicle End, part # C57187, into your vehicle's reverse light wiring. I recommend using Dielectric Grease for Electrical Connectors, 2 oz, part # 11755, during the installation to help eliminate rust and corrosion at the contact points. I have included product description...
    view full answer...
  • Installing Tekonsha P3 Brake Controller # 90195 in 1999 E450 Class C Motorhome
    It certainly may be that the wiring from the under dash brake controller port is not routed all the way to the trailer connector at the back of the motorhome. If there is a 7-way connector on the back of your coach you can try tracing the blue brake circuit wire forward from the connector; you may be able to find a point where it can be connected to the wiring from the front of the vehicle. You can also run a new brake output wire from the back of the P3 directly to the trailer connector...
    view full answer...
    Image 1 for
  • How To Wire 6-Way Square Connector on 2000 Viking Popup to 2001 Mazda Tribute With 4-Way Flat
    I do have a few solutions to wire your 2000 Viking with 6-way Square to your 2001 Mazda Tribute 4-Way flat. The first option would be to cut off the 6-way connector on your Viking Popup Camper, and wire in a 4-way connector by function. You will want to use Hopkins Endurance 4-Way Flat Trailer Connector - Trailer End - Ergonomic Design. part # HM48110. To wire, you will want to wire the labeled color wire on part # HM48110 to the matching wires on your trailer. Another option would be...
    view full answer...
  • Is Function of Blue Wire on 5-Way Connector, Part # 20017, For Reverse and How to Wire To 7-way
    The blue wire will connect to the reverse light circuit on the tow vehicle, but it will also send a signal to disengage the brake actuator on the trailer when you put your vehicle in reverse. So when you are in reverse, the trailer brakes will not be engaged. You would need a 7-way adapter like Adapter 7 Pole to 5 Pole Flat, part # A75TB. To wire the reverse lights on your trailer, you would need to connect the power wire from the trailer reverse lights, to the blue wire on the 5-way...
    view full answer...
  • Does Tonno Pro Hard Cover for 2018 Toyota Tacoma Come with Rail Blocks for Deck Rail System
    Yes, the rail blocks you mentioned that come with the Tonno Pro cover part # TP42-511 do come with the part # TPHF-562 that you also mentioned. These blocks allow the cover to fit the deck rail system of the truck.
    view full answer...
  • Is Tonno TPHF-562 Pro Hard Folding Tonneau Cover for 2019 Toyota Tacoma Lockable
    The # TPHF-562 tonneau cover does not have a lock on it, but since it opens from the underside it will be secure if your tailgate is lockable. In other words, the cover can't be opened until you gain access by opening the tailgate. If the tailgate doesn't have the OEM lock on it, you can install one on your 2019 Toyota Tacoma using the # PL54FR from Pop&Lock. I've linked you to a video showing how the tailgate lock is installed.
    view full answer...
  • Will Hopkins Vehicle Wiring Converter HM48915 Operate Turn Signals In-Phase with Vehicle
    The Hopkins Vehicle Wiring Converter # HM48915 will do what you need; it will take the separate stop and turn signals from the individual lights on your 1999 Nissan Frontier and combine them onto one wire as required by typical trailer lighting systems. With this in place you could then add a set of magnetic towing lights like # TL21RK. I confirmed with my technical contact at Hopkins that this converter's turn signal output will be IN PHASE with the vehicle's turn signals. You might...
    view full answer...


< Previous
123. . .4



Do you have a question about this Accessories and Part?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality accessories and parts for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate accessories and part information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Robert G
Expert Research:
Robert G
Employee Jeff D
Expert Research:
Jeff D
Employee Jameson C
Expert Research:
Jameson C
Employee Leah S
Updated by:
Leah S

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-496-5010