bing tracking image
  1. Accessories and Parts
  2. Redline
  3. Trailer Lights
  4. Light Bulbs
  5. Clear
Replacement # 67 Bulb for Trailer Lights, License Plate Lights, and Utility Lights - Qty 1

Replacement # 67 Bulb for Trailer Lights, License Plate Lights, and Utility Lights - Qty 1

Item # 67
Retail:$2.76
Our Price: $2.26
You Save: 18%
Accessories and Parts
Orders above $99 qualify for Free Shipping
Shipping Weight: 0.03 lbs
Quantity: 
In Stock
67 - Light Bulbs Redline Accessories and Parts
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Need help with installation?
Locate installers near me
Replace the incandescent #67 bulb in your clearance, license plate, or interior light with this single filament light bulb. 12-Volt bulb. Includes 1 replacement bulb. 1-800-940-8924 to order Redline accessories and parts part number 67 or order online at etrailer.com. Free expert support on all Redline products. Great prices and Fastest Shipping for Replacement # 67 Bulb for Trailer Lights, License Plate Lights, and Utility Lights - Qty 1. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (13)
  • Q & A (0)
  • Photos
  • Why etrailer?

Redline Accessories and Parts - 67

  • Trailer Lights
  • Light Bulbs
  • Redline
  • Clear

Replace the incandescent #67 bulb in your clearance, license plate, or interior light with this single filament light bulb. 12-Volt bulb. Includes 1 replacement bulb.


Features:

  • Replace the incandescent #67 bulb in your clearance, license plate, or interior light with this single filament light bulb
  • 12-Volt bulb
  • Includes 1 replacement bulb


67 Replacement # 67 Bulb for Trailer Lights, License Plate Lights, and Utility Lights - 12 Volt - Qty 1

449800






Customer Reviews

Replacement # 67 Bulb for Trailer Lights, License Plate Lights, and Utility Lights - Qty 1 - 67

Average Customer Rating:  4.8 out of 5 stars   (13 Customer Reviews)

Replace the incandescent #67 bulb in your clearance, license plate, or interior light with this single filament light bulb. 12-Volt bulb. Includes 1 replacement bulb.

by:

Great part that I needed for by build. It’s exactly what I needed. Shipping a lil slow and could use some improvements.




by:

I was looking for a softer, warmer bulb for lighting the inside of our old RV and these worked perfectly. I'll be ordering more. Always order from this company because they have the best product information, helpful installation videos and great customer service! No other company comes close!




by:

I've been looking everywhere for these!
These incandescent bulbs have a nice warm glow. They are worth the expense to me as I prefer a softer light when camping.




by:

The product was exactly what we were needing for our trailer. Thank you for the quick and excellent service.




by:

Excellent...was what I was looking for. I own a 99 year motorhome. Everyone's review helped. The company lived up to expectations! Will use them again.




by:

Great outfit to deal with, top notch quality and fast shipping. The fit on these parts is oem, looks and works as good as stock.




by:


Comments
All the parts I ordered are still working and are in excellent condition
Rudy - 02/22/2022


by:

It’s a good product. Unfortunately it was the wrong size, but that’s on me. One problem with ordering things like this online. You can verify that they look alike but you can’t judge the size. Still a good rating though.




by:

This website is so helpful! They had the exact lights that I needed and they were delivered to my home so quickly and in perfect condition!

Highly recommend!




by:

Just as expected.
Excellent service
and delivered faster than expected.




by:




by:




by:



13
13

See what our Experts say about this Redline Accessories and Parts

  • Is 67 Bulb Correct License Plate Light Replacement?
    Though the wattage for Replacement Bulb # 67 was not available, this 12V bulb will replace all #67 bulbs so you only need to be sure that is the correct replacement bulb for your 1993 Mitsubishi Mighty Max; if it is the right type of bulb it will work for you.
    view full answer...
  • Replacement Clearance Lights For A 1987 5th Wheel Camper
    To find the proper bulb for your 1987 5th Wheel Camper you would need to know what brand of light you currently have. For example The Replacement # 67 Bulb for Trailer Lights, License Plate Lights, and Utility Lights # 67 will replace a number 67 bulb. I would recommend getting a whole new clearance light. The Thinline LED Trailer Clearance or Side Marker Light w/ Bracket # MCL67RB is conically sealed, and has a waterproof housing and lens that makes the unit submersible. The light has...
    view full answer...
  • Can Chrome Base A67CBPG Be Used with Trailer Lights # MCL67RB and # MCL67AB
    Yes, the lights part # MCL67RB and # MCL67AB can use the chrome base part # A67CBPG that you referenced. The lights come with the black version of this base so you could easily swap it out for the chrome one if you wanted.
    view full answer...
  • How Does the Bracket # A67CB and Clearance Light # MCL67ARB Wire to Trailer
    The reason the # A67CB bracket uses a single wire is because the light will ground through the mounting hardware. If you needed to run a second ground wire to the assembly you would only need to run the stripped ground wire around the mounting screw that attaches to the side of the base with the ground strap. See picture I attached to see which side has the ground strap. The # MCL67ARB uses a similar setup and also grounds through the mounting hardware. The single wire coming from the...
    view full answer...
    Image 1 for
  • Amber Trailer Light that Matches the Red Light Part # MCL67RB
    The amber light you're looking for is part # MCL67AB. Both it and part # MCL67RB measure 3-15/16 inches long, 1-1/4 inches tall, and 7/8 inches deep. I've linked videos on them both for you.
    view full answer...
  • Replacement Bolts For Exposed Racks Roof Rack Measurements
    The Replacement Bolts for Exposed Racks # ER67VR in the replacement kit # ER67XR, measure 2-1/4" long and are 3/8" in diameter.
    view full answer...
    Image 1 for
  • Availability of Optronics 67RB Clearance/Marker Lights in Red and Amber
    It sounds like you're looking for the Thinline LED Trailer Clearance or Side Marker Light with Bracket part # MCL67RB for red or part # MCL67AB for amber.
    view full answer...
  • Recommended Hitch for a 2018 Volvo V90
    The Draw-Tite Trailer Hitch item # 76194 fits a 2016-2023 Volvo XC90 it will not fit a 2018 Volvo V90. I confirmed this information with Draw-Tite and our own installation guide. The crossbar is required to hang down a few inches below for the XC90 than it does the V90. That's why the mounting holes can be in the same spot but this not work. We have two options for hitches for a 2018 Volvo V90 and which one you need will be determined by whether or not you plan on towing or using the...
    view full answer...
  • What Wire Gauges does Bargman 7-Way Molded Trailer End Connector and Cabel Use
    I spoke with my contact at Bargman and he said the gauges are as follows: Black and White: 10 gague Blue: 12 gauge Brown, Red, Green, Yellow: 14 gauge
    view full answer...
  • Which Wire is the Reverse Wire on the 7-Way Molded Trailer End Connector
    On the 7-Way Molded Trailer End Connector, # 50-67-008, the reverse light wire is yellow. It is the wire attached to the center pole of the plug.
    view full answer...
  • Installing The Bargman 7-Way Molded Trailer End Connector # 50-67-008 To A Viking Pop-Up Camper
    The wire color code on the Bargman 7-Way Molded Trailer End Connector, part # 50-67-008, is White - Ground Red - Left Turn and Brake Brown - Right Turn and Brake Green - Tail Lights Blue - Electric Brakes Black - 12v power Yellow - Auxiliary/Reverse Lights I would recommend to use a circuit tester like the Quickee Tester, part # 3808, and test the wires on your Viking pop-up camper for function. Once you know what function each wire carries, you will be able to wire the Bargman 7-Way...
    view full answer...
  • Highest Capacity Fifth Wheel Hitch for 2016 Ram 3500 With Puck System
    We have some high capacity hitch setup for you to consider, and one more than 30k; we are aware of the absurdly high towing capacity your 2016 Ram 3500 would have if it was a dually and a diesel and a long bed. I just checked the Ram page it lists a whopping 31,200 lb capacity for this vehicle configuration. The highest rated fifth wheel hitch we have to fit your 2016 Ram 3500 with the factory puck system is the 31,000 lb rated Demco UMS Double Pivot 5th Wheel Hitch - Single Jaw - Ram...
    view full answer...
  • Instructions to Wire a Trailer for Electric Brakes
    It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean metal surface on the trailer. I have included a diagram for you.
    view full answer...
    Image 1 for
  • How to Determine Trailer Wiring Functions on a Travel Trailer for 7-Way Replacement
    Trailer wiring color codes can vary greatly so I have a solution for you, but I can't tell you which color wire goes where on your trailer for wiring up a new 7-way. However, you may look around the wiring junction box or pin box of your trailer. There may be a diagram there. Instead you will want to use a jumper wire from a 12 volt source like a vehicle battery to apply voltage to all of the wires of your trailer wiring to see what activates. It can help to use masking tape to label them...
    view full answer...
  • When Installing a 7-Way on a Trailer is a Junction Box Required
    You don't have to install a junction box when you install the # 50-67-008 on your trailer. If you wanted you could just run the wires to each function as needed. The black wire of this connector would be the one to use for the charge wire of your battery. Using a junction box like the part # 38656 would make installing the wiring easier though. I attached an install video for it for you to check out.
    view full answer...
    Image 1 for
  • 10 Foot 7-Way Plug and Lead Recommendation
    We have the very similar part # 50-67-005 which is basically just a 10 foot version of the part number you referenced. The 50-67-616 is just a 7-way plug and lead like the one I referenced with only a 6 foot long section of wiring. I attached an install video for you to check out as well.
    view full answer...
  • Wire Color and Functions of Bargman 7-Pole, RV-Style Connector # 50-67-008
    The key here is that the functions are in the correct locations. Wire color is going to vary from manufacturer to manufacturer which is why you should always wire by function and use a circuit tester like # 3808 when wiring in a connector like # 50-67-008. The reason we list the wire color and functions on the product page is because there is no official industry standard for wire color. If you tried to wire by matching colors, there is a very good chance that it will be wired incorrectly....
    view full answer...
    Image 1 for
  • Dimensions of the Optronics Thin Line LED Marker Light # MCL67AB
    The Optronics Thin Line LED Marker Light, # MCL67AB, is 4 inches wide and 1-1/4 inches tall. The base measures 4-1/8 inches wide by 1-1/8 inches tall. The screw holes on this light are 3 inches apart on center. I have attached a photo showing the dimensions for you.
    view full answer...
    Image 1 for
  • What is the Function of the Black Wire on the Bargman 7-Pole Trailer Connector # 50-67-008
    The black wire on the Bargman 7-Pole Trailer Connector, # 50-67-008, will carry 12 volt power from the tow vehicle for accessories on the trailer that require a 12 volt power source such as an additional trailer battery, breakaway battery or any other accessory. This wire will carry 12 volt power from the tow vehicles battery. You can attach it where you would like, or tie it off if you do not have a use for that function. I have listed the functions of the wires below. Yellow: center...
    view full answer...
  • Horse Trailer Electric Brakes Lock Up When Backing Up the Trailer
    There could be a short in the truck or trailer side connector that occurs when the vehicle is put in reverse. The center pin is typically the reverse light circuit. You will want to make sure that the truck and trailer side connectors are clean and free of corrosion inside and out. Inspect the power wires to the magnets and look for pinched, frayed, or damaged wires and fix as needed. Make sure the ground wires are attached to clean and corrosion free bare metal surfaces.
    view full answer...
  • Replacement Clearance Light for 1999 EZ Loader Boat Trailer
    According to Wesbar, the lamp you specified was discontinued about 5 years ago. We have several clearance/marker lights that would work for you, but one of the closest to the 4-3/4 x 1-7/16 x 1-1/4 inch size of the original lamps is part # MCL67AB from Optronics. Instead of bulbs, the lamp uses LED's, which are brighter than incandescent bulbs, but draw a fraction of the power. The lamp measures 3-15/16 in length, 1-1/4 inches height and 7/8 of an inch deep. If you click the provided...
    view full answer...
  • Are Connectors On Either End of 50-67-210 Identical or a Mirror Image of Each Other
    The contacts one each end of the Bargman # 50-67-210 are exactly the same. This item is intended to be used if your trailer connector would not be able to reach your tow vehicle. You can plug in one end on your trailer and plug the other end into your tow vehicle.
    view full answer...
  • Does Rhino Rack Roof Rack part # RR67TR Fit a 2016 Toyota Prius
    The Rhino Rack part # RR67TR that you referenced is a fit for your 2016 Toyota Prius. We don't have a picture of it installed on a 2016 model yet but we confirmed this rack as a fit for your vehicle so it will work well.
    view full answer...
  • Will Rhino-Rack Roof Rack Fit 2004 Chevrolet Impala 4-Door
    Yes, the Rhino-Rack ROC25 Series Clamp-On Roof Rack, # RR67YR, is a correct fit for your 2004 Chevy Impala with naked roof. When mounted on your Impala the two square crossbars will be positioned 29-1/2 inches apart (measured center to center) and will have a 165-lb weight capacity. Please refer to your Impala owners manual for any restrictions or guidelines about rooftop cargo weight capacity. If the vehicle and rack have different weight capacities you need to go by the lower of the...
    view full answer...


< Previous
123. . .39



Do you have a question about this Accessories and Part?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate accessories and part information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Laura H
Updated by:
Laura H
Employee Wilson B
Written by:
Wilson B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.