Replace the spindle nut and retaining washer on your EZ-Lube axle with 1" spindle with 14 threads per inch pitch. Includes 2 spindle nuts and retaining washers.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're gonna take a look at the spindle nut kit for E-Z Lube Axles. Now, this part will replace the spindle nut, the D washer, and the nut retainer on your E-Z Lube Axles with this complete kit. This is designed for one inch spindles that have 14 threads per inch thread pitch. This kit is designed for E-Z Lube Axles, because an E-Z Lube Axle does not allow the use of a Cotter pin to retain the nut on the spindle. It has to use the nut retainer to work on an E-Z Lube Axle. This part will include everything shown here, the two spindle nuts, the two D washers, and the two nut retainers.
So, when you go to install these on the spindle you'll first put your D washer on, then you'll screw your nut on, and then clamp on your nut retainer to hold it into place. That should do it for the review on the spindle nut kit for the E-Z Lube Axles.
Average Customer Rating: 4.8 out of 5 stars (191 Customer Reviews)
Replace the spindle nut and retaining washer on your EZ-Lube axle with 1" spindle with 14 threads per inch pitch. Includes 2 spindle nuts and retaining washers.Had to wait for back ordered parts but everything went together great.
I probably could have reused the original parts and saved some money, but it is great to have totally new Hub Assys (and retention fasteners) on my trailer.
Product worked well.
just what I wanted
As an unskilled person looking for parts for our trailer, we could not find them locally or even online, I called etrailer and spoke with Jesse M. He was extremely professional, courteous and knowledgeable. He was able to locate the parts I described almost immediately and took my order for the parts and they were exactly what we needed. I would highly recommend etrailer and especially Jesse M. to anyone needing trailer parts.
Thank you, Donna
Exactly what I needed. These are hard to find.
worked great
I am in the process of inspecting and repacking the wheel bearings on a pair of Dexter 7K easylube axles. I bought a set of these to have as spares for the project. I received the Dexter axle washer, nut and retainer in a timely manner. The nut and retainer are nearly indistinguishable (to me) from the original Dexter parts. The Washer ID and thickness is the same as the original Dexter part, but the OD is slightly smaller but that doesn't appear to be a problem to me.
Called on a Monday morning to inquire if items I needed were in stock. Sales agent very helpful and polite, offered to take order then for quicker processing. Placed order for 2 new trailer tires w/rims and tang washer kit (hard to find) for my older trailer which doesn't have the cotter pin setup.
Standard delivery was free with my order, and I upgraded to 3-5 day express for a few bucks more to insure I could install by weekend.
All parts arrived in Jacksonville FL on Thursday afternoon, so I could install on the weekend. Tracked shipment all along the way.
All in all, products were as expected and very reasonably priced, service was great, delivery was on time.
Will use eTrailer again!
Gary
JAX FL
A special shout out to SHAWNEE! Thank you so much for helping with this order and getting it in the mail on time.
I was servicing the bearings on my RV trailer and damaged one of the locking plates. I was unable to find this style lock nut and plate anywhere locally. I tried parts stores, RV dealerships and another source that deals in specialized automotive and trailer repairs. I had to settle for the castle nut with the bend in tab. I should have done a goggle search but I need to get on the road. A quick search and there is the item I need. Great Price and now I have a couple of spares for the next time I service the bearings.
I am very pleased with the speed of the delivery and the exact replacement parts I needed. They are a perfect fit for my 10 year old boat trailer.
The ease of finding parts on the website that I needed to repair my hubs was extremely important to me as we are still very active with our boat . Without the parts we were stuck on dry land. Not a good way to end the year. But etrailer.com came to the rescue and we were back on the water.
Thank you for all your help....
Installed with a new bearing set to replace the old ones. For the few extra dollars more than just the retainers cost you can get the whole kit.
Perfect fit for my trailer to replace a castle nut and retaining washer that was gacked on one side. No issues installing, so far so good! Overall looked like quality pieces that give you peace of mind towing. The old retaining washer got messed up by the previous owner or whoever serviced the axles last and was actually allowing the castle nut to back off the axle. This new piece looks much more secure than the old style.
Replaced brakes and drums on 3.5K Dexter EZ lube axles. The parts were exact change-out. Quality is as good or better than the originals.
I've have been rebuilding a flat bed trailer, that I use for hauling rat rods and potential rat rods, and everything I have ordered from etrailer has been great. Fast shipping, excellent job on keeping me updated on tracking information. They also have great videos on how to information. Very pleased with this company, and how they operate. When I need something for my trailer, I don't look anywhere else, I just go straight to these guys, and know they will have just what I need. Thank you very much!!!!
These were exactly what i needed. Price was good and it is a much better locking system then the ones that were on the axle to start with. I am a fan of a cotter pin and not the flat spot on the axle but you have to work with what you have. I love these guys the few times I have dealt with them is excellent.
No pictures because all you would see is a nut, retainer and a ball of grease.
In short, I couldn’t find what I needed (the retaining ring) anywhere locally. The internet and etrailer came to the rescue! Everything fit perfectly and my trailer is functional again.
The order was shipped promptly and, if needed, I will go to the etrailer sight first next time!!
This is the first time I have done business with e-trailer and let me say that their service and support is top notch. The actual human on the phone was most knowledgeable and knew exactly how to help me. All the parts I ordered arrived on time and were the exact ones I needed. After dealing with e-trailer, and experiencing their service, support, shipping and prices, there is no need to look anywhere else.
This new design for the spindle lock nuts is far superior to the previous nuts that used a washer with a tab to lock the nut. I lost a wheel with a new tire I suspect due to the tab breaking off. I recommend this product to everyone who has the old design spindle nut.
Received parts yesterday and everything arrived in excellent condition. Without etrailer's helpful guides it would have taken a lot longer to identify the correct Hub's and bearing's that I needed for my jet ski trailer. I always go to etrailer for my trailer needs!!!! I have a jet ski trailer, boat trailer, and 36.5 foot 5th wheel camper. So I'm always needing parts!!!
Never used this type of spindle nut lock ring. Thought it went under nut it doesn't. so messed the first one up. Would be nice if there was a pic or info. on package for assy. (but really my bad). nothing on product or company. Worked awesome after I got stupid out of the way.
This setup is much more dependable than the castle nut with a locking washer. The cage around the spindle nut is locked in on the flat portion and then grabs the nut not allowing it to move. My axle doesn’t have a hole through it for a cotter pin, so this is my best option.
My trailer has the older design with the castle nut and flange washer. I bought these to keep as spares with my extra hub. However when the time comes to service my bearings again I will go with this style because I can tell these will be much easier to use than trying to bend a flange into the ridge of the castle nut.
These are awesome. Easy on and off and infinite adjustments. No more bending and breaking tabs.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.