Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Torx flathead screws make securing a wood floor to your trailer quick, easy and economical with a 1/4" diameter and type F points for heavy-gauge sheet metal. Specially designed for use on Alkaline Copper Quaternary wood.
Features:
Specs:
TFX225ACQ Redline Screw For Treated Wood 1/4" x 2-1/4"
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today, we're going to review the two and a quarter inch long Torx trailer floor and wall liner screw for the ACQ treated wood. These Torx flathead screws make securing a wood floor to your trailer very quick and easy and economical. This screw, in particular, has the type F point, which is designed for securing your wood floor that have the gauge sheet metal. This screw is also specifically designed for use on the ACQ wood, which is Alkaline Copper Quaternary wood. Now, because this ACQ treated wood is very corrosive, these screws have been made with an approved plating material that is less expensive than using stainless steel screws and has been shown to outperform the galvanized screws. If you noticed it has the tapered flathead, which will sit flush with the surface after they're installed. Few specs on this, the size Torx on this is T30.
The diameter of this is one quarter inch in diameter. The length, I'm going to measure for you, is going to be right at two and a quarter inches long. We have mentioned it has the type F point, which is a blunt tip, but if you see as I rotate, it has multiple cutting surfaces. When you do install this, you do need to require or it does require drilling a pilot hole of 7/32 to install these. That should do it for the review of the two and a quarter inch long Torx trailer floor and wall liner screw for the ACQ treated wood.
Average Customer Rating: 4.9 out of 5 stars (90 Customer Reviews)
Torx flathead screws make securing a wood floor to your trailer quick, easy and economical with a 1/4" diameter and type F points for heavy-gauge sheet metal. Specially designed for use on Alkaline Copper Quaternary wood.Very good quality.
The screws worked flawlessly and I plan to get many years of use out of them.
Good product and shipped promptly. Fairly priced. Thanks.
great. arrived on time. 1/2 the price of a local hardware store
Good description/depiction of item...Fantistic service...Shipping was quicker than expected...I will use etrailer in the near future
Bolts & EtcAll items were as advertised, shipped in a timely manner and I am again very happy with etrailers.
Thanks James
The fasteners arrived in record time and were just as advertised. etrailer folks stayed in touch and made sure everything was fine. Thank you for a trouble free purchase.
Good product. Worked great for re-decking my trailer. Product arrived Fast, as described, great communication by etrailer. Best price on this I could find!
Use the size drill bit they tell you to use and they go right in. Try one size to small and they will snap off.
I have not hauled anything with the trailer since I redecked it but do not foresee any problems
I ordered enough screws to finish and then start another project. They arrived in a timely manner and were package nicely. No one locally carried then, happy to do business again with etrailer.
These screws were perfect for replacing the treated wood floor of my utility trailer. They screwed directly back into the same holes that were made when the last floor was installed. Etrailer made the purchase process easy, and shipping was quick.
Fast delivery! Screws worked great for redoing trailer deck.
Delivered ahead of time,had no problems installing on trailer.
Great service for Trailer parts.
The deck screws arrived in perfect condition.
Price couldn't be beat, hard to find part.
Perfect for re-decking my home built trailer.
I'll shop your store again...
Thx
This is the second time I've purchased this product, and both times it's stood up to the test. Shipping was incredibly quick also. I use these screws to repair an outdoor city balcony deck, which is mounted to a solid steel frame.
The key is to ensure the pilot hole is completely drilled, and the screws go into the steel like butter afterwards. I only broke one screw head and stripped 2 others out of 100, and this was because my pilot hole was not as clear as it should have been.
These screws were perfect for my trailer repair! I am very pleased with the product, the directions, and the new and improved look of my trailer. I would highly recommend this product to anyone!
Steve
10/6/2023
All is going well. No rust, corrosion, or broken screws. I would still highly reccommend this product.
Mike L.
10/21/2023
I was very happy with the product. They worked just as they should have. Made re-decking my trailer a breeze. Securing the deck boards at every cross member makes a world of difference in how long the deck lasts.
Product showed up in a timely manner and was easy to install and did what was required of it
Worked perfectly for securing 2x4 floor to trailer frame.
Replaced the wood deck on my trailer. It works out great when you can use the proper screw to do the job. was an easy project and securing down the 2" x 6" wood decking to the metal frame of my trailer.
Sam G.
9/8/2017
Great Holding up even in the Hot weather here
Worked great! Drilled in 200 of these screws and only 1 broke. The one that broke was justified as I was going through 2 layers of 10ga steel on that one spot. The second one I tried went in fine. Shipped fast and worked as promised.
My recommendations to use this easily: Drill 7/32" pilot holes with a cobalt bit and have a lot of bits on hand if you plan to drill a lot of holes. Also, use a T30 screw bit and if you have one, an impact driver is recommended. Boards are now sitting secured and tight to the frame. Very pleased and much easier than carriage bolts.
John S.
2/10/2016
After 1 year, all the screws are still holding strong and none have backed out, corroded, or broke. Still very Happy!
This product worked perfectly. I did not break or strip any of the screws. I did dip the tip in oil to get some lubrication.
This is a great screw. Haven't broke any or had any issues installing. Worth the $.
great product, 175 screws with no problem! Mail innovation shipping is pathetic thou
Must pre-drill these deck fasteners! They worked perfectly on my trailer
Daniel B.
9/7/2020
Still holding strong. Im going to order more to screw down the deck on a hay wagon
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Richard S.
4/15/2024
The screws are holding perfectly, and my trailer still performs great!