bing tracking image
  1. Accessories and Parts
  2. Reese
  3. Trailer Hitch
  4. Hardware
Trailer Hitch Spacer Block - 3" Long x 1" Wide x 1/4" Thick

Trailer Hitch Spacer Block - 3" Long x 1" Wide x 1/4" Thick

Item # RP3022
lowest price pledge
Retail:$13.47
Our Price: $9.23
You Save: 31%
Accessories and Parts
Orders above $99 qualify for Free Shipping
Shipping Weight: 0.19 lbs
Quantity: 
Reese Accessories and Parts - RP3022
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Videos

Need help with installation?
Locate installers near me
Replaces (1) 3" long x 1" wide x 1/4" thick spacer block for your trailer hitch receiver. Call 800-298-1624 to order Reese accessories and parts part number RP3022 or order online at etrailer.com. Free expert support on all Reese products. Guaranteed Lowest Price and Fastest Shipping for Trailer Hitch Spacer Block - 3" Long x 1" Wide x 1/4" Thick. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (160)
  • Q & A (0)
  • Videos (1)
  • Photos
  • Why etrailer?

Reese Accessories and Parts - RP3022

  • Trailer Hitch
  • Hardware
  • Reese

Replaces (1) 3" long x 1" wide x 1/4" thick spacer block for your trailer hitch receiver.


Features:

  • Replaces a 3" long x 1" wide x 1/4" thick spacer block for your trailer hitch receiver
  • Quantity: 1 spacer block


3022 Reese Trailer Hitch Spacer Block - 3" Long x 1" Wide x 1/4" Thick





Video of Trailer Hitch Spacer Block - 3" Long x 1" Wide x 1/4" Thick

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Reese Trailer Hitch RP3022 Review

Today we're going to take a look at the spacer block. This spacer block is normally used in a situation where you're going to be using a fish wire or a bolt leader, something like this, to bring a bolt through a hole that's in a closed vehicle frame. You want to use the spacer block with the bolt, usually like a carriage bolt like this that would go through the spacer block. You want to hold that into the frame. You'll use the bolt leader or fish wire to attach to the end of this bolt, along with the spacer block, and bring it through the hole in the frame. When you detach the bolt leader, it will leave your bolt sticking out thought the vehicle frame to allow you to hook your trailer hitch to your fifth wheel, your gooseneck, or any other item like that. Just to give you a few dimensions on this spacer block, overall length on it, it's going to be right at three inches.

The width on it is right at one inch. The thickness is right at a quarter inch. That should do it for the review on the spacer block.


Customer Reviews

Trailer Hitch Spacer Block - 3" Long x 1" Wide x 1/4" Thick - RP3022

Average Customer Rating:  4.9 out of 5 stars   (160 Customer Reviews)

Replaces (1) 3" long x 1" wide x 1/4" thick spacer block for your trailer hitch receiver.

- RP3022
by:

The hole in the block must be in Metric size for a Canadian built vehicle. Otherwise the Receiver is very versatile. First as a receiver, second to hold a winch, third to hold a boat cradle over the roof of the truck.


Comments
These are typically used with a bolt leader to bring a bolt through a hole in a closed vehicle frame. This spacer block fits a half inch carriage bolt.
-- Etrailer Expert Sierra K - 12/13/2021


- RP3022
by:

Very robust. Exactly what I needed to mount my hitch on my VW GTI.



- RP3022
by:

A police car pulled into my lane and hit me head on. I escaped without injury but my car was totalled ( photo attached). I salvaged my brand new trailer hitch but the company that put it on would not install it on my new car because there were two bolts and spacers I was unable to recover. Luckily I learned they got the hitch from etrailer. I called and got Rose who was very friendly and helpful and soon had my parts on their way to me. Wish all my purchases were this easy.



- RP3022
by:

Product was fine, I had to take the hitch to my local shop because I couldn't get the last bolt through to complete the installation. My SUV really benefited from being put on a lift by my local shop, they completed the installation.



- RP3022
by:

These backing blocks were like the original equipment and worked perfectly. Shipping was very quick.



- RP3022
by:

I purchased a used hitch for my CRV and did not have all the hardware to install it. I called etrailer and received great customer service and was able to get all the hardware that I needed to make the installation a breeze. I would definitely recommend the bolt leaders if you're going to be doing installation yourself it made the job a lot easier on me.



- RP3022
by:

Exactly what I was looking for and it matches the description on the website. Couldn't be happier!



- RP3022
by:

Thus is a bad news good need review. The package was delivered as told bad news the package was damaged and spacers missing. Good news call to customer service was quickly answered and a re ship was done same day. I have bought several things from etrailer always as promised with some of the best customer service of any online company I buy from.


Comments
Great
John S - 11/14/2019



- RP3022
by:

I had to grind the ends down a bit and round the corners to make them fit where I needed them to go. However, they worked perfectly!



- RP3022
by:

glad to see you can buy parts individually to put on a trailer hitch


Comments
very good product to get the job done right
Russell A - 10/30/2020


- RP3022
by:

I used this to help with a Jeep XJ trailer hitch install. I pretty much destroyed the install wires due to the way I had to fish the parts through the frame area, but the install was successful.



- RP3022
by:

I can't find these anywhere other than here. I wish I would have added a few to my original order in anticipation that I was going to break a weld nut during the install process. Would have saved time and shipping cost! But, once I had it in hand, it worked great for my hitch install.



- RP3022
by:

Good product, easy transaction!!!



- RP3022
by:

Worked perfectly as I was installing my trailer hitch, which is a simple task but ran into an issue. The bolt holes were pretty corroded on the right side so they needed the threads cleaned, with good ole WD 40 I continued to clean with a tap. After getting 2 done the center one weld nut break off inside the frame, as they have very small tack welds from factory holding them on. So I ordered up this bolt, plate, washer, leader, and a nut to fix the issue, it was simple and an easy fix to a problem at first I wasnt sure how I was going to fix. Fast shipping from etrailer.com and it was done ready to be used in a jiffy. Highly recommend


Comments
The parts are doing what they were intended to do and super happy with my purchases. If I am ever in need for future vehicles etc I wouldnt hesitate to buy from you again. Thanks again Ryan thumbs up
Ryan T - 01/16/2018



- RP3022
by:

Delivery was fast. Wanted to put hitch on A different car(same model/year) and not used stressed bolts. Needed spacers and leaders so purchased the items needed from one location,in one box.



- RP3022
by:

Fits into frame for 1997 wrangler TJ perfectly for installing a hitch.



- RP3022
by:

I haven't used this product yet; however, I am 100% satisfied of the communication with etrailer regarding this product of being on hold to them. I still received it quickly and uneventfully. I order 10 and got 10 even though I just needed 2 because I am sure this item will come in handy with other applications other than reattaching receiver hitches. The carriage bolts required for this product was easily located at the local Tractor Supply. Thanks etrailer



- RP3022
by:

How easy was the install of my 2008 Ford Escape hitch? I watched the video and then I installed my hitch two days before I was scheduled for rotary cuff surgery. My right shoulder was more cosmetic than functional for heavy lifting. So, patiently, with jacks at the ready, I installed my hitch. I had to call on my wife once to hold a screw driver, otherwise, I did it solo. In total, it took less than an hour and I needed one arm, an adjustable wrench, vise grips to hold the lead wire, some floor jacks and a wife (for about 15 seconds after she stopped asking questions.) I didn't do the electrical, because I'm using it for bike racks only.



- RP3022
by:

Etrailer, A new-to-me truck meant a new hitch installation. Needing the mounting hardware for a hitch that I already own, I tried several local vendors for the needed parts to no avail. After a brief internet search, I easily located the bolts, nuts, washers, and fish wire on your website and placed an order. Then, WOW! The level of attention and communication from your staff regarding my order was incredible. The order and the communication was timely, accurate, and thorough. I am now a loyal customer. Thanks for the great experience! Wish me luck in not busting my knuckles during installation. -Chris



- RP3022
by:

I applaud etrailer.com after I did not receive my order in a reasonable amount of time, I called etrailer.com and they were very responsive and quickly got my order to me. Great job! This unique product was tough to find anywhere else and it will work great when I install my receiver hitch assembly.



- RP3022
by:

Received the spacer blocks today and they are excellent. Good quality and they are very difficult to find. I read several internet forums topics where people spent loads of time and money trying to create these things. This is the cheapest and simplest option i could find on the internet. Also the bolt leaders save a lot of time from trying to devise a solution to pull a bolt through narrow frame rails. With these leaders the bolt hole only needs to be as big as the bolt itself because the leader does not take up any space and holds the bolt very securely.



- RP3022
by:

The washer wouldn't go over the square part of my carriage bolt took me an hr with a file to get them to fit you would think for 10 dollars for one washer they would fit i tried multiple bolts



- RP3022
by:

Received my package for lost parts for my Curt 13333 hitch for my Ram 1500. I thought shipping was a little exaggerated for 4 small parts, but this was the only places I could find them. Prices for the actual parts were excellent. The spacers were simple steel with a square hole in them, not a big thing, but difficult to find elsewhere and impossible for a DIYer to make. Be warned, if you plan on purchasing item 8101-1, the 1/2" bolt leader, they are cut WAY TOO SHORT. Plan on buying 2 and make small hooks on the ends and tape the ends together, that's the only way to use them.



- RP3022
by:

This carriage bolt block was impossible to find locally. Couple this with the bolt leader wire and the how to video on this website and I had zero issues. I was actually amazed at how quickly I was able to fish the bolt/spacer combo into the frame of my car to fix the broken weld but issue. Now all I need is the bolt up the hitch. Thanks etrailer!



- RP3022
by:

Thanks etrailer for the parts to install a hitch receiver on my son's 08 Ford Escape Hybrid. I had the receiver but not the hardware backing plates. these fit perfectly. reasonable prices and quick shipping.


25
160
Show More Reviews

Ask the Experts about this Reese Accessories and Parts



  • Is Trailer Hitch Spacer Block # RP3022 Sold Individually
    The Trailer Hitch Spacer Block # RP3022 that you referenced is sold individually.
    view full answer...
  • What is the Trailer Hitch Spacer Block Made From
    The Trailer Hitch Spacer Block - 3" Long x 1" Wide x 1/4" Thick # RP3022 is made of carbon steel, so it will be susceptible to corrosion. You could put a coating of some sort of Plasti-dip type substance on this before installation to help protect against that, but I don't believe it's completely necessary because of the typical use of this part will shield it from most direct exposure to moisture.
    view full answer...
  • Replacement Spacer Block to Install a Trailer hitch on a 2012 Ford Focus
    I doubt a hardware store would have one but you never know. Block # RP3022 could work. the only difference is that the original is 1/4 x 7/8 x 3 inches and this one is 1/4 x 1 x 3 inches. I am sure the frame is wider than 1 inch!
    view full answer...
  • Replacement Spacer Block For Trailer Hitch On 2000 Honda CR-V
    The spacer block you can order is part # RP3022. This block measures 1/4 inch thick and is 1-inch wide and 3-inches long. Trailer Hitch Hardware is designed for a one-time use only and if the hitch is being re-installed I recommend replacing all of the hardware for installation. For the kit you would need part # RHK. Then put your hitch number in the box and from the drop-down menu select the hitch manufacturer. The complete hitch installation kit will be sent to you.
    view full answer...
  • Availability of Spacer Block for Trailer Hitch Installation on 2017 Chrysler Pacifica
    I do have a solution for you, however the closest spacer block we currently have available to the dimensions you listed in your question is the Reese Spacer Block # RP3022. The size of this spacer block is 1/4" x 1" x 3". If you are looking for replacement hardware for the trailer hitch on your 2017 Chrysler Pacifica, you will use part # RHK. You can type in the trailer hitch item number in the text box on this product page and it will give you the correct replacement hardware kit, including...
    view full answer...
  • Replacement Carriage Bolt and Washer For Hitch
    The carriage bolts we carry are mostly replacement parts for products so we do not carry a huge variety of bolts. We do not carry a 3/8" carriage bolt at this time. If you are looking for replacement hitch hardware, you can use part # RHK and type in your hitch model number to get a whole replacement hardware kit.
    view full answer...
  • Do You Carry the Square Hole Spacer and the Fish Wire for the Curt Hitch # C15572?
    The .250 x 1.50 x 3.00" square hole spacer, the .188 x 1.00 x 3.00" square hole spacer, and the 1/2" x 30" fishwire for the Curt Trailer Hitch Receiver - Custom Fit - Class V # RP3022 are available with the Replacement Hardware Kit for Trailer Hitches # RHK. I confirmed with Curt that you will need to purchase the entire kit to replace the hole spacers and the fishwire you need. They cannot be ordered individually outside the rest of the kit. Once you get to part # RHK on etrailer.com,...
    view full answer...
  • Replacement Bolt And Nut Options For Trailer Hitch
    Your best bet is to use # RHK, even though you do not need the entire kit. We do not offer these bolts and nuts individually, unfortunately.
    view full answer...
  • What Comes in a Replacement Hardware Kit for Trailer Hitch 75709 for a 2011 Ford Edge
    If you order the replacement hardware kit # RHK and enter the hitch number and manufacturer where indicated on that page then our warehouse team will put together the hardware listed in the instructions for that hitch. I have included a link to the instructions for you so you can see the procedure as well as the hardware that is used.
    view full answer...
  • Completing Hitch Install on 2008 Toyota RAV4 after Weld Nut Breaks
    Your best bet would be to use the spacer block you referenced, in conjunction with a grade 5 or higher, 1/2 inch by 1-1/2 inch carriage bolt, lock washer and nut. You would use a fish wire like part # 80101-1 to fish the bolt and the block washer up into the frame member through the access hole shown in the photo and out the hole where you want to install the hitch. You might need to slightly enlarge the access hole as shown in order for the head of the carriage bolt and the block washer...
    view full answer...
  • Dimensions of Spacers Included in Hardware Kit for Draw-Tite Sportframe Trailer Hitch # 24805
    Draw-Tite Sportframe Trailer Hitch # 24805 includes two sizes of spacers among its included hardware. The larger spacer, part # RP3022 if ordered on its own, measures 1/4 x 1 x 3-inches. The smaller spacer measures 1/4 x 1-1/4 x 2-inches. All the hitches we sell include the required hardware, which is for one-time-use only. We can supply replacement hardware kits for all of the hitches we sell, part # RHK. To order hardware for your hitch enter that part number RHK in our search box and...
    view full answer...
  • How to Order Replacement Hardware for a Curt Trailer Hitch
    Hitch hardware is almost always Grade 5. The Curt Hitch part # 13408 is no exception. Going with Grade 8 certainly wouldn't hurt anything though. To order replacement hardware you will need part # RHK. You will need to select your hitch manufacturer and part number.
    view full answer...
  • What Size Bolts Come with Curt Trailer Hitch part # 13408
    The trailer hitch part # 13408 comes with install bolts that are 7/16-14 x 1 3/4 and M12 - 1.75 x 50mm. These are Grade 5. If you were in need or replacement hardware you can order it from us with part # RHK.
    view full answer...
  • How is Hole Enlarged Typically on 2011 Honda CR-V to Install Curt Trailer Hitch
    To install the Curt hitch # C11555 you only need to shave down the edge of the holes slightly until you are able to slide in the 1 inch x 3 inch spacers. This can be done with a metal file or a rotary tool like a dremel like you mentioned would work as well.
    view full answer...
  • Spacer Block and Bolt Size for Trailer Hitch 75270
    The Draw-Tite Hitch # 75270 that you are installing on your 2008 Honda Odyssey uses M12 X 1.25 X 35mm bolts and 1/4“ X 1-1/2“ X 2” spacer blocks and you can get replacement hardware for this at part # RHK. We do not have these parts available individually but you should be able to source them at a local hardware or auto parts store.
    view full answer...
  • Hardware to Install Discontinued Hidden Hitch Trailer Hitch on 2009 Honda Accord
    The Hidden Hitch trailer hitch that fit your 2009 Honda Accord was part # 60325 which has been discontinued and replaced with the Draw-Tite hitch, part # 24899. To get the original hardware from your Hidden Hitch use part # RHK and select Hidden Hitch in the drop down and enter the part # 60325 in the text box. This will order the complete kit that came with the hitch including the pull wire. I've linked an install video of the Draw-Tite hitch going on an Accord for you to see if you'd like.
    view full answer...
  • Is Hardware Included with Curt Hitch for 2007 Chevy Uplander
    All of the necessary hardware is included with the Curt hitch # 13336. All of our hitches include the hardware unless it's designed to use the vehicle's existing hardware; which is not the case with # 13336. With that being said, if you ever need replacement hardware we do carry kits using part # RHK. On the product page you choose the hitch manufacturer from the drop down and enter the hitch's part number and you'll receiver the exact same hardware originally included with that particular...
    view full answer...
  • What Size Carriage Bolt Fits Spacer Block # RP3022
    Block # RP3022 is designed for a 1/2 inch carriage bolt. The matching nut is # 55178 and the matching conical tooth washer is # 01292-008.
    view full answer...
  • Having Trouble Getting Curt Trailer hitch to Sit Flush on the Frame of a 2015 Toyota Highlander
    It is not uncommon for some hitch installations to require spacer blocks of some kind to get the hitch to install properly. If they are required in your situation then it is permissible to use them. A spacer block such as # RP3022 could be used unless Curt recommended to you a specific spacer. You will want to make sure the hitch is level by using spacer blocks equally on the left and right side as needed. Since this is on a very new vehicle, the material that is causing the fit issue...
    view full answer...
  • Fish Wire Bolt Leader And Spacer Block Needed
    We will have some of these items. The Curt Fish Wire Bolt Leader - 7/16", part # C58410, is the pull wire you are inquiring about. The spacer block is part # RP3022. I have included product description links and video demo links below.
    view full answer...
  • Availability of Replacement Spacer Blocks for Curt Trailer Hitch C13362
    While we don't have just the CM-SP12 spacers for the Curt Trailer Hitch Receiver # C13362, you can either get a complete replacement hardware kit with part # RHK or you can just get 2 of the Trailer Hitch Spacer Block - 3" Long x 1" Wide x 1/4" Thick # RP3022 from Reese and trim the length to 2" (1/2" off of either end) since Curt doesn't offer single replacement parts for their trailer hitches.
    view full answer...
  • Bolt for Hitch Will Not Torque Down
    If a bolt will not torque down while installing a trailer hitch this means the bolt was likely cross threaded. There are a few options to fix this, the first would be drill out and then re-tap the hole with the next largest thread size using a kit like the Tap Wrench Kit for Standard Pipe Sizes part # PT22FR. The weld nut however could break when tightening down the new bolt so in which case the final option would be to drill the rest of the weld nut out and then using a spacer block like...
    view full answer...
  • How to Install a Trailer Hitch on a 2005 Honda Pilot with 2 Broken Weldnuts in the Frame
    When using replacement hardware kit # RHK you would get the same hardware that originally came with the kit (some specialty pieces may not be included). Since you have broken weldnuts the only thing you can do is use a block and carriage bolt, drop them down through the frame using the fishwire technique and then use a nut to secure the hitch to that bolt. This is assuming you do not want to go through the trouble or expense of having new weldnuts professionally installed in the frame....
    view full answer...
  • Removing a Broken Weld Nut from Inside of Vehicle Frame
    There are a couple things you can do to remove your current weld nut. One is using a drill bit to expand the hole slightly. Because of your limited access, I would use a bolt leader like # 80101-1 to fishwire bolts through the frame of your vehicle. Since you have broken weld nuts, you will have to use different hardware to complete installation. With that said, you will need spacer blocks # RP3022, 1/2 inch carriage bolts, Conical tooth washers # 01292-008 (tooth side facing towards the...
    view full answer...


< Previous
12



Do you have a question about this Accessories and Part?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality accessories and parts for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate accessories and part information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Lindsey S
Updated by:
Lindsey S
Employee Wilson B
Updated by:
Wilson B
Employee Jeff D
Installed by:
Jeff D
Employee Randy B
Installed by:
Randy B
Employee Kathleen M
Video Edited:
Kathleen M

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.