Reese Weight Distribution Shank - 16,000 lbs
(28 reviews)
Price: $173.14
Reese Weight Distribution Shank - 16,000 lbs
Retail:$185.10
Our Price: $173.14
You Save: $11.96
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (28)
- Q & A (0)
- Photos
Reese Accessories and Parts
- Weight Distribution Hitch
- Shanks
- Fits 2 Inch Hitch
- Round - 2 Inch Drop
- Trunnion - 2 Inch Drop
- Reese
- Round - 7 Inch Rise
- Trunnion - 8 Inch Rise
Shank offers 7-3/8" rise and 2-3/4" drop when used with round-bar systems and 8-5/8" rise and 2" drop when used with trunnion-bar models.
Features:
- Designed for use with either round-bar or trunnion-bar weight-distribution systems
- Provides both drop and rise
- Weight distribution cast shank
- Machined for a tighter fit
- Seven vertical mounting holes with groove for mounting accessories
- Black powder coat resists rust and corrosion
Specs:
- Fits: 2" x 2" trailer hitch receivers
- Gross towing weight capacity: 16,000 lbs
- Tongue weight capacity: 1,600 lbs
- Round bar system:
- Rise: 7-3/8" from top of hitch receiver tube opening
- Drop: 2-3/4" from top of hitch receiver tube opening
- Trunnion-bar system:
- Rise: 8-5/8" from top of hitch receiver tube opening
- Drop: 2" from top of hitch receiver tube opening
- Overall dimensions: 14-1/4" long x 10-1/2" tall
- Distance from center of shank pin hole to back end of receiver : 4"
- Distance from center of shank pin hole to notch: 2-3/4"
- Distance from center of shank pin hole to back of adjustment shank: 8-1/4"
- Distance from center of shank pin hole to center of adjustment shank pin holes: 9-1/4"
- Distance from center of shank pin hole to front of adjustment shank: 10-1/4"
- Space between pin holes center on center on adjustment shank: 1-1/4"
- Limited lifetime warranty
54998 Reese Weight Distribution Shank
Item # RP54998
California residents: click here
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
Customer Reviews
Reese Weight Distribution Shank - 16,000 lbs - RP54998
Average Customer Rating: 4.9 out of 5 stars (28 Customer Reviews)
Shank offers 7-3/8" rise and 2-3/4" drop when used with round-bar systems and 8-5/8" rise and 2" drop when used with trunnion-bar models.by: Andrew01/21/2019
I purchased this as a replacement for the other Reese shank in the picture. I wanted the longer one but the WD head holes are set back a 1 1/4” vice the more nominal 1”. This slight 1/4” difference kept the Equalizer 12k head from pivoting and the lack of a solid face does not have a place for the adjustment bolt to push on. This one has 9 1/2” distance from the receiver pin to center of the riser arm. Many are only 8” , so the additional 1 1/2” allowed for enough clearance for the tailgate to lie flat and has a solid face. I’m happy with this one.
by: Martin10/29/2021
Lighter weight than my earlier shank, and the height of the hitch is much better. The connection to my Airstream trailer works better, no longer screeching, and the trailer is much more horizontal. The shank no longer is subject to occasional digging into the ground or scratching across a speed bump.
by: Jeff W09/21/2017
This drop shank does exactly what it's supposed to do. I have a 2015 Nissan Titan and a 2016 Airstream. Airstreams are low profile, modern pickup trucks sit high. I had to replace the shank that came with a Reese hitch in order to level the airstream behind the Titan. This one is JUST long enough. Have had several thousand miles of problem-free towing.
by: William 01/05/2023
Just what I needed Great Product !
by: Kollin06/21/2018
Flipping my shank over in the raised position made my ball too high and having it down made it to low. This shank was perfect as I could raise my ball just one more hole because of how this one is more of a T-shape versus an L, thus it has one more hole that I can raise my ball without flipping the shank over. It has worked out perfectly.
by: Billy08/17/2018
If you need to order things on line like they sell - Then this is the company to go with. They are the best. They have very good products, I am very pleased. They are very fast on delivery also. I have ordered different things from this company before.I am very pleased with the service I have got . They have been Excellent to me Thank You
by: George S.05/06/2017
Great product & company. The only place to purchase trailer parts & accessories for trailer or tow vehicle is etrailer.
by: Andy H.06/01/2014
Product is well built and arrived as advertised. No complaints. Would buy from etrailer.com again.
by: Jeff C09/22/2014
Product came undamaged, on time and fit the application.
by: George 04/20/2020
The extra hole gave me the extension I needed Now my RV is level with the truck and in arrived on time
by: Doug P.04/22/2014
Well built and the service from etrailer was the best.
by: Aretta03/03/2022
Order arrived in three days nice friendly people you all did good will shop there again if I need more parts highly recommend
by: Nick 04/16/2021
Quality, Ordering quick and simple quick delivery
by: Doug08/18/2019
Works and fits perfectly.
by: Steve C01/02/2020
Perfect
by: Tom09/09/2019
Good fit. Fast service. Knowledgeable people on the phone order line.
by: John S08/19/2017
product worked as decribed
by: Timothy06/12/2019
Thanks for great parts at competitive prices, and fast service..
by: joey w10/31/2014
exactly what I needed. price was good and shipping was great.
by: William 09/26/2022
by: Jerre08/17/2023
by: William 06/02/2023
by: Lynn12/08/2022
by: James 07/04/2022
by: Michael 08/31/2022
25
28
Show More Reviews
See what our Experts say about this Reese Accessories and Parts
- Dimension Of Drop When Using Reese Weight Distribution Shank # RP54998 With Round Bar SystemI reached out to the manufacturer and they stated that the round bars can have up to 4-7/8 inch rise or 6-7/8 inch drop with round bars when you use the Reese Weight Distribution Shank - 16,000 lbs # RP54998. They also stated that trunnion bars will subtract 1 inch from each of the rise and drop measurements.
view full answer... - Shank Recommendation to Replace Reese Steadiflex ShankWhat you would want is the Reese shank part # RP54998 as it has it's bolt holes set up a bit higher than the shank insert for the hitch so that would cover where you need to set the height of your hitch head. I attached a picture of the shank to show you what I mean.
view full answer...
- Is Hole Spacing of Reese Weight Distribution Shank # RP54998 StandardThe hole spacing on the Reese weight distribution shank part # RP54998 is 1-1/4 inch like what you current shank has. Thankfully the weight distribution manufacturers all use standard shank hole dimensions which allows them to be interchangeable.
view full answer... - How to Determine Hitch Classification for 2 inch Hitch on Vehicle2 inch hitches are typically a Class III if they are on SUVs larger cars, and lighter duty trucks. If it's a heavier duty truck though it's most likely a Class IV. A good indicator is the towing capacity for the hitch. If it's up to around 8,000 lbs it's most likely a Class III. If it's up to around 12,000 lbs it's most likely a Class IV. I attached a help article on hitch classifications for you to check out as well.
view full answer... - Replacement Weight Distribution Shank and Trunnion Bars for Trailer with 1,700 lb Spring BarsFor a Reese shank that has a 1,600 lb tongue weight capacity that should work great you would want the part # RP54998. Since your tongue weight is around 1,500 lbs you would want to go with the 1,700 lb trunnion bars part # 66010. These have the curved ends that will work with the Straitline system you have as well.
view full answer... - Why are the Rise/Drop Specs for the Reese WDH Shank Different from the ManufacturerThe Reese Weight Distribution Shank part # RP54998 will provide up to a 2" drop when used with trunnion spring bars and measuring from the top edge of the shank to the platform of the weight distribution head. I understand that other vendors/manufactures may have different specs depending on how where they measure but so long as you are aware of where the measurements being taken from this should not matter. If you need more than a 2" drop, the Reese Weight Dist Shank part # RP3215 which...
view full answer... - Can Reese Weight Distribution Shank 54998 be Used in Place of Reese Shank 54970Yes, you can use weight distribution shank # RP54998 in place of shank # RP54970. The hole spacing and size to mount the weight distribution head is the same on both shanks.
view full answer...
- Reese Weight Distribution Shank with 2 and 3-1/4 Inch Drop for Trunnion Bar SystemI checked with Reese and the drop should be 2 inches from the top of the receiver opening to the top of the ball platform on the weight distribution head. Going with shank # RP63971 will be the better option.
view full answer... - Recommendation for a Lighter Weight Distribution System for Trailer with 350 Pounds Tongue WeightReese weight distribution shank # RP54998 and the one that comes with Curt weight distribution system, 17300 (discontinued), weigh about the same which is 20 pounds so you would not benefit from switching shanks. The various weight distribution heads also weigh about 20 pounds (not counting the ball) so really you are looking at a combined weight of around 40 pounds no matter which system you go with. The Reese trunnion bar head, round on system # RP66020 is the lightest set up since...
view full answer... - Matching Shank With 2 Inch Receiver for Reese Titan Weight Distribution SystemThe best shank for the Reese Titan Weight Distribution # RP66006 to fit in a 2" receiver is the Reese Weight Distribution Shank # RP54998 because it is the shank with the highest capacity at 16,000 lbs which is the closest you can get to matching the Titan's 17,000 lb capacity. I've added a link to a video review of this shank for you to check out.
view full answer... - Can a Different Shank be Used with Reese Steadi-Flex Weight Distribution SystemYou do not need to use the specific shank that is included with the Reese Steadi-Flex Weight Distribution System w/ Sway Control # RP66561 referenced in your question. Many weight distribution shanks will be interchangeable with the Reese system. You will just want to match the vertical groove style of the included shank such as with the Reese # RP54998. I have attached a link that will take you to our available selection of weight distribution shanks as well as an article that will help...
view full answer... - Reese Weight Distribution Shank with the Most DropNone of the Reese weight distribution shanks have a drop of 17 inches. The longest drop comes from # RP3344 and it has a max drop of 8-5/8 inches when used with a round bar system, 7-58 inches drop when used with a trunnion bar system. I have included a link to all of the Reese weight distribution shanks we carry.
view full answer... - Recommended Shank for Strait-Line Weight Distribution System in a 2 Inch Trailer Hitch ReceiverYes, the Reese Strait-Line Weight Distribution System # RP66075 can use a shank for 2 inch trailer hitch receivers. I suggest the Reese # RP54998 that's rated for 1,600 pounds tongue weight. You'll also need a hitch ball with the Strait-Line. Part # 63840 is a great choice.
view full answer... - Replacement Weight Distribution Shank for 1600 lb Tongue WeightThe Reese Weight Dist Shank - 13" Long - 6-3/4" Drop to 11-1/2" Rise - 1,400 lbs TW # RP3215 is a unique dimension so I don't have anything that is an exact match to what you are seeking but I do have other options. I've linked the page to all your replacement shank options. If the rise and drop doesn't make the biggest difference then the Reese Weight Distribution Shank - 16,000 lbs # RP54998 which has a distance from center of hitch pin hole to center of head mounting holes at 9-1/4...
view full answer... - Weight Distribution System Recommendation for Truck Towing Trailer with Camper in Truck BedThanks for all of the information you listed. The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I attached a help article on determining tongue weight for you to check out as well. You will want the loaded tongue weight of your setup to fall right in the middle of the tongue weight range of the system...
view full answer... - Largest Drop Weight Distribution ShankThanks for the picture! That's a large drop you are needing. I recommend the Curt Weight Distribution Shank - 12" Long - 15-3/4" or 16-1/4" Drop - 1,500 lbs TW item # C17125. The Curt shank is compatible with your Reese weight distribution system. I have attached a diagram detailing the dimensions of this shank so you can confirm you need one with this big of a drop.
view full answer...
- How to Pick Out New Drop Shank for Weight Distribution With New, Taller TruckTo determine the amount of drop you would need would be pretty easy. You will need to measure from the top of the hitch opening on your 2016 Ram 2500 to the ground and then compare that dimension to the distance from the bottom of the coupler on your trailer to the ground when level. The difference between those two dimensions is the drop you would need. The part # RP54998 that you referenced can do a drop of 2-3/4 inches so it most likely wouldn't be enough, but the # RP3215 would give...
view full answer... - How Long is the Shank Included with 1,200 Pound Reese Steadi-FlexThe distance from the center of the hitch pin hole to the center of the hitch ball hole on the Reese Steadi-Flex # RP66560 is around 13 inches. The shank included with the system is part # RP54998. If you need a longer shank that has similar rise and drop specs you can use part # RP3214 which is about 3 to 3-1/2 inches longer from the hitch pin hole to the ball hole.
view full answer... - Can 2 Inch Weight Distribution Shank be Used in 2-1/2 Inch Trailer Hitch Receiver on 2016 Ram 2500To use the Reese weight distribution shank # RP3344 in a 2-1/2 inch trailer hitch receiver I recommend the use of reducer sleeve # C45405. I have spoken with Reese about this before and the use of a reducer sleeve with weight distribution is acceptable.
view full answer... - Weight Distribution System Recommendation for 2017 Stryker Toy HaulerThe best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I attached a help article on determining tongue weight for you to check out as well. You will want the loaded tongue weight of your setup to fall right in the middle of the tongue weight range of the system you use. Considering the weight of your trailer...
view full answer...
- Weight Distribution Shank Compatibility With Pro Series Weight Distribution SystemMany weight distribution shanks will be interchangable with your ProSeries weight distribution system. The only thing you need to do is match the style of the shank. So if it is a channel style, you will need to get a channel style drop shank like # RP63971. If it is a regular shank you can use a traditional style drop shank like # C17123. If it has a vertical groove, you will need the vertical groove like # RP54998. Other than style, you will just need to get compatible weight rating...
view full answer... - Weigth Distribution System Recommendation for Trailer with 1,500 lbs Tongue WeightThe best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I attached a help article on determining tongue weight for you to check out as well. You will want the loaded tongue weight of your setup to fall right in the middle of the tongue weight range of the system you use. Lets go with your tongue weight being...
view full answer... - Weight Distribution and Sway Control Recommendation for 2016 Ford F-250 Towing 11.5k Trailer The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I attached a help article on determining tongue weight for you to check out as well. You will want the loaded tongue weight of your setup to fall right in the middle of the tongue weight range of the system you use. For a trailer that weighs 11,500...
view full answer... - Weight Distribution System Recommendation for Trailer with over 1,200 lbs Tongue WeightThe best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I attached a help article on determining tongue weight for you to check out as well. You will want the loaded tongue weight of your setup to fall right in the middle of the tongue weight range of the system you use. If the tongue weight unloaded is...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Updated by:
Adele M
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Carrie F
Installed by:
Cole B
Installed by:
Andy C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Martin
10/30/2022
The Reese shank that I bought last year and have been using has been great. This summer I had a new hitch receiver installed on my Ram 1500, which lowered the receiver somewhat. Because of this, I flipped the new shank, so my hitch is better positioned. This shank is much lighter weight than shank I used in the past, and which was unsuitable to flip over because it was too long to use with its vertical part pointing up.