Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Designed for use with Reese weight-distribution systems, this kit includes 2 snap-up brackets and a handle for easy lifting and lowering.
Features:
Specs:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at part number RP6637. These are the Reese replacement lift brackets for Reese Weight Distribution Systems. The brackets are going to mount on the trailer tongue and they're going to provide the connection points for the chainS that are connected to the weight distribution spring bars. Those chains are going to connecT right here to this little hook. The lift bar attaches to the handle, right here. That's going to make lowering and raising the spring bars much easier and safer.
That lift handle is included. The replacement unit is designed for use with Reese Weight Distribution Systems. You're also going to get your two safety pins. They through this area right here. That's going to keep the brackets in the raised position. These are made from a steel construction and they're going to have a nice black powder coat finish which is going to make it stand up well against rust and corrosion.
You're going to get two snap up brackets. You're going to get the two pins, your installation bolts will go into this slot back here. You're going to get the left handle. Now these are going to install approximately thirty inches back from the coupler. If we take a measurement of the width, that's going to let us know about how much room along the trailer frame it's going to take up. From edge to edge that looks to be about five and a half inches so it's going to take up about five and a half inches of space along the trailer frame.
If we measure the opening here, you see that measures just a little over two and a half inches. So this will not fit trailer frames that are wider than two and a half inches. That's going to do it for today's review of part number RP6637. These are the replacement lift brackets for the Reese Weight Distribution Systems.
Average Customer Rating: 4.9 out of 5 stars (167 Customer Reviews)
Designed for use with Reese weight-distribution systems, this kit includes 2 snap-up brackets and a handle for easy lifting and lowering.
Thanks to etrailer they helped get the right replacement parts and everything went great.
Great price! Great item, only one reason giving 4 instead of 5 stars. In the enclosed instructions, they read pre-drilled holes to hard mount to trailer frame. These are not pre-drilled, not "etrailer"s fault. I presume that is a "Reese" production change, but don't feel right not expressing a little "irritation" that I now have to drill holes in the brackets as well as my trailer frame.
I bought these to replace a bent bracket. Decided to replace as a pair. Work great on my Reese trunnion bar setup. Shipping didn't take long. Having installation instructions included was a nice touch.
Just what I needed. Clear instructions, and quality parts. Great follow up from staff. Thanks.
Lift brackets were not quite a direct replacement for my WD hitch (a ProPride 3P), but they work great and are much easier/quicker to use. The paint wears off near the pivot points and where the chain goes. Every so often, I take them off and re-paint them so they look pretty. After a year, they still work great, but there is very slight wear where the chain hooks up.
These weight distribution brackets really helped my trailer hitch weight. I am glad that they really helped when I pull my toy hauler. Thanks for your products.
Great product worked as advertised and easy to install
Packed securely and arrived a day earlier than expected. That's always nice!
Shipped and received On Time. Prompt with tracking information and received as advertised. Well Done.
Exactly what i needed
Arrived early which helps my schedule this week, thanks a lot.
Delivered on time and was an exact fit for the old ones. The retaining pins seem kind of small but haven't done any towing yet to see how they hold up.
Just what I expected. Thank You
The lift brackets fit the sway bars we got from our neighbor. Worked very well. Wish the transmission on the old Suburban we previously used with the bars, worked as well. The "new to us" F-350 diesel 4x4 should remedy that problem. A bit over kill, but was what we could find at the time. Thanks.
Pam
5/3/2017
Perfect - we have used it and it works well - used for over a month last summer - will be using again this summer. Thanks for having replacement parts.
Always had excellent service with e-trailer. I ordered parts for an equalizing hitch, was advised that if I ordered under a different part number I would get faster delivery at a cheaper price and quicker delivery and a free handle. So I did, thanks e-trailer.
So easy to install and works great! The trailer pulls much better with the equalizer hitch installed. These were parts to put on a second trailer in order to use a hitch I already had. Very timely delivery and easy installation!
Great source for parts! Thanks everyone.
I received excellent assistance when contacting etrailer by phone, trying to determine the correct piece-items needed for my new trailer, to replace the parts for my Reese Sway-Control/Wt Distribution system that I "lost" when selling my old trailer.
they were polite, patient and helpful.
This hardware set, as well as the Lift brackets and Dual-sway Cams were as heavy-duty as needed (as described) and will be putting them onto my new trailer as soon as I pick, it up.
Very pleased with the products, perfect fit to my already weight distribution hitch. shipping was fast and the package was surprisingly wrapped better than I thought it would have been. the brake controller was the easiest to install, Just connect the cable to the connector under the dash and it works. Just read the instructions on setting the power level for your trailer brakes. that is very important. Sorry about no pictures bad weather while installing but will take pictures of finished product. Thanks again
I bought these for a second trailer. My load leveling hitch now works for both trailers. I'm happy with these.
I bought a new camper and wanted to go out camping the next week but i needed weight distribution brackets and a an anti sway mount before i could go. I ordered these parts from etrailer.com and in a matter of a few days the correct parts showed up and i was able to install them before i needed to leave for my camping trip. Needless to say i was very happy.
Very happy with the brackets. The pins look a bit flimsy so I replaced them with better lockable ones.
I have not installed the lift brackets on my trailer, but cannot find any reason that they would not work as designed. It is winter in the northeast and I will not install for a while. These lift brackets will definitely aid in hauling my 4500lb enclosed car hauler trailer.
this is a Reese product, I expect it to be good and it is. fits and works as represented.The price, customer service and shipping was great.
Carl H.
12/10/2017
Lots of long heavy miles . Works fone
We purchased Reese hitch accessories from etrailer.com and are very satisfied with our purchase.
E-trailer is great to work with. I was not sure which lift brackets would work, e trailer made it easy with all the videos and information.
I received the product in just a few days and it took me 10 minutes to hook it up.
Thanks e trailer I will be back for all my towing needs.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Mike
7/23/2023
They work very good. It pulls up the weight off of my hitch how ever much I want! Thanks for your products.