Roof Rack Leg Spacer Blocks for Rhino-Rack Heavy-Duty Crossbars - 5 mm Thick - Qty 2

See what our Experts say about this Rhino Rack Accessories and Parts

Rhino Rack Pioneer T...

Rhino Rack Pioneer P...

Rhino Rack Tower and...

What is the Weight R...

Is Drilling Required...

Weight Rating for th...

Will the Heavy Duty ...

Recommended Roof Rac...

• How To Level Rhino-Rack Heavy Duty Crossbars For Rooftop Tent
  If the tent is not level on your roof rack then your only solution is to install leg spacers to the side that is lower so that you tent will have a more leveled mounting surface. You can go with Roof Rack Leg Spacer Blocks for Rhino-Rack Heavy-Duty Crossbars - 5 mm Thick - Qty 2 # RRQMHD05 which comes with two 5mm spacers, or 1/5". Or you can go with the larger Roof Rack Leg Spacer Blocks for Rhino-Rack Heavy-Duty Crossbars - 20 mm Thick - Qty 2 # RRQMHD20 with are two 20mm spacers, or...
  view full answer...
• Leg Spacers for the Rhino-Rack RCH Legs
  If you're looking for the leg spacers to mount Heavy-Duty crossbars to your RCH Legs, part # RRRCH6, then the correct part number for those are # RRQMHD05. With these, you'll be able to mount Rhino-Rack HD Bars, part # RB1250. This may seem confusing at first because the fit-guide states that these are not compatible with your 2007 Lexus GX 470. However, in this particular (and very rare) case, the specific vehicle does not matter because these are attaching to the legs. In other words,...
  view full answer...
• Installing Rhino Rack Pioneer Platform on Travel Trailer
  Since your 2020 No Boundaries 16.2 travel trailer came with Rhino Rack roof channels the parts you'd need to install a larger Rhino Rack Pioneer Platform tray are # RR42113BF, # RRQMHD05 (3 sets), and # RRRCL6 and you'd be set.
  view full answer...
• Parts Needed to Install Rhino Rack Pioneer Platform on Vehicle with Roof Tracks
  If you were looking for a 6 pack of feet that can attach to the Rhino Rack Pioneer Platform part # RR45TB you'd want the # RRRCL6 and then 3 sets of the spacer kit part # RRQMHD05 for a way to attach the setup to roof tracks or "channels" like it sounds like you are looking to do. The parts you mentioned are not going to work ideally which is why I would not recommend them for you.
  view full answer...
• How to Mount a Rhino-Rack Pioneer Platform Rack to Roof Tracks
  In order to mount the Rhino-Rack Pioneer Platform Rack part # RR42101BF on your SnugTop Camper Shell with Rhino Rack Tracks you will need two of the Roof Rack Leg Spacers part # RRQMHD05 and one of the Rhino-Rack Quick Mount Legs part # RRRLT600. That will be all you need. The legs also come with keys for security. I was able to confirm the above with Rhino Rack.
  view full answer...
• Rhino Rack Pioneer Tray Compatibility and Components for ARE Truck Cap with Factory Tracks
  You won't need any roof rack crossbars to mount a Pioneer Platform to your ARE cap with factory rail tracks. You will use the Rhino-Rack Universal Pioneer Platform Rack - 58" Long x 47" Wide # RR42115BF, the Rhino-Rack Quick Mount Legs # RRRLT600, and two sets of spacer blocks # RRQMHD05. I confirmed these parts with my tech contact at Rhino-Rack so you will be good to go
  view full answer...
  
• Will Yakima HD Crossbars Work With Rhino-Rack Mounting Legs RRRLT600
  The Yakima HD Crossbars won't work with Rhino-Rack Mounting Legs part # RRRLT600 but they do offer the very similar Rhino-Rack Heavy-Duty Roof Rack Crossbars part # RB1650B-2 which will work if used with the Roof Rack Leg Spacer Blocks part # RRQMHD05.
  view full answer...
• What Heavy Duty Crossbar Setup do You Recommend for My Snugtop Camper Shell with Tracks?
  Without knowing the exact crossbar dimensions that are compatible with your ROAM tent's clamps, we do have a crossbar system that will give you the weight capacity you need to work with your Snugtop camper shell on your 2015 Toyota Tacoma. For this setup, you need the following parts: - Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks # RRRLT600 - x2 Roof Rack Leg Spacer Blocks for Rhino-Rack Heavy-Duty Crossbars - 5 mm Thick # RRQMHD05 - Rhino-Rack...
  view full answer...
• Availability of Longer Rhino-Rack Crossbars to Work with RT-Style Roof Rack Tracks
  The Rhino-Rack RT-Style Roof Rack Tracks # RRRTV148 that you referenced are compatible with a few different style mounting legs. For example, you can use the Track Mount RTC Legs # RRRLT600 with either the aero bars or the Rhino-Rack Heavy-Duty square bars using spacer # RRQMHD05. The aero-style bars from Rhino-Rack are available in lengths of up to 79 inches like with the Aluminum Aero Crossbar # RRVA200S. The Yakima towers will not be compatible with the Rhino-Rack tracks, but if...
  view full answer...
• Parts Needed To Install Rhino-Rack Pioneer Platform Roof Tray on a Truck Bed Camper
  In order to install a Rhino-Rack Pioneer Platform Roof Tray on a truck bed camper you will need the following: Rhino-Rack Pioneer Platform Roof Tray part # RR42109BF Rhino-Rack Quick Mount Legs part # RRRLT600 Roof Rack Leg Spacer Blocks part # RRQMHD05 (2) Rhino-Rack RT-Style Roof Rack Tracks part # RTC14 Unfortunately, there is no Backbone Mounting System for a truck bed camper. The reason for this is that you will be limited in regards to weight by that of the camper and there is no...
  view full answer...
• Rhino Rack Pioneer Platform that Fits 2018 Jeep Wrangler Unlimited
  The mounting kit needed to fit a Rhino Rack Pioneer Platform to the roof of a 2018 Jeep Wrangler Unlimited is the part # RRRJLB1 which you could potentially be used with the smaller Pioneer Platform # JA8688 but you are going to end up having to get the # RRQMHD05, the leg kit # RRRLT600 and the # RRRLT600H. I'd go with the larger # JB0893 though as it will fit and is the most cost effective solution. The picture I attached shows what the # JB0893 looks like installed.
  view full answer...
  
• Will the SeaSucker Ski and Snowboard Carrier Fit on My 2001 Jeep Wranger with Textured Hard Top?
  I reached out to my contact at SeaSucker, and he said that as long as the surface on your 2001 Jeep Wrangler is non porous and relatively smooth (not too abrasive), the SeaSucker Ski and Snowboard Carrier - Vacuum Cup Mounted - 4 Pairs of Skis or 4 Boards 298-SK2420 should mount to your roof. However, they confirmed that they have not tested the carrier on that specific model of Wrangler. If you want an alternative option that will definitely work, you can setup a roof rack system and...
  view full answer...
• Rhino Rack Tower and Crossbar Compatibility with Thule Factory Installed Tracks on Truck Cap
  Yes. The Thule tracks will accept the Rhino-Rack feet and crossbars. The kits like the Rhino-Rack Roof Rack for Factory Tracks - 2 Vortex Aero Crossbars - Black - 54" Long # Y02-480B-NT will work well, or you can piece together the parts you desire. The really nice aspect of Rhino-Rack towers is they come with the included locks and are great quality at a really good price point. To piece together your kit, you will use the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC...
  view full answer...
  
• Recommended Rhino-Rack Pioneer Platform Compatible with Yakima Tracks on 2017 GMC Canyon 5 ft Topper
  The Rhino-Rack Pioneer Platform # RR42115BF is one of the correct size for your 5 foot bed and topper. The platform will attach to your Yakima Aero bars without any problem. I reached out to my contact at Rhino Rack and you can absolutely install a platform directly to your tracks using Rhino-Rack Pioneer Platform Rack - 60" Long x 49" Wide # RR35TB, Legs # RRRLT600, 2 sets of spacer blocks # RRQMHD05, and adapter kit # RRT-FK3. This will be a clean look.
  view full answer...
• What is the Weight Rating of the Rhino-Rack Gutter Mount Roof Rack on a 2022 Jeep Wrangler Unlimited
  The weight rating for the gutter mount system from Rhino-Rack is really 88 lbs for your 2022 Jeep Wrangler Unlimited with the hard top. Since there are many other options out there with a higher rating I recommend going a different direction. For your application I recommend the Rhino-Rack Backbone roof rack system which consists of the following: 59" HD Crossbars - # RB1500B-2 Quick Mount Legs - # RRRLT600 Backbone System - # RRRJLB1 Rubber Bases - # RRQMFK06 Spacer Blocks - # RRQMHD05-2 This...
  view full answer...
  
• What Heavy-Duty Crossbar Setup do You Recommend for My 2018 Jeep Wrangler Unlimited with Hard Top?
  For mounting a heavy duty crossbar setup on your 2018 Jeep Wrangler Unlimited JK, I recommend the following components: - Rhino-Rack Heavy-Duty Roof Rack Crossbars - Black - 59" # RB1500B-2 - Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks # RRRLT600 - Rhino-Rack Backbone Roof Rack Mounting System # RRRJLB1 - Rubber Bases for Rhino-Rack RRRLT600 Quick Mount Legs # RRQMFK06 - Roof Rack Leg Spacer Blocks for Rhino-Rack Heavy-Duty Crossbars - 5 mm Thick...
  view full answer...
• 2022 Jeep Gladiator Rhino-Rack Roof Rack Using Backbone System
  To install crossbars with the Rhino-Rack Backbone system on your 2022 Jeep Gladiator you need the following parts: Backbone Roof Rack System - # RR65QJ Rubber Bases - # RRQMFK06 Quick Mount Legs - # RRRLT600 HD Leg Spacer Blocks - # RRQMHD05 (you need 2 of these) 59" HD Crossbars - # RB1500B-2 Please note this isn't a fit that Rhino-Rack has listed but I don't see why this wouldn't work since you're just replacing a fit kit with the Backbone which is supposed to offer much more support....
  view full answer...
• How To Use Rhino-Rack Heavy Duty Crossbars On a Pace Edwards Tonneau Cover with Thule/Yakima Tracks
  Yes, you can use a Rhino-Rack Roof Rack with the Thule/Yakima tracks on the Pace Edwards Metal Ultragroove Retractable Tonneau Cover. I have listed the parts you need below: Rhino-Rack Quick Mount Legs part # RRRLT600 Adapter Kit for Rhino-Rack RTL600 Legs part # RRT-FK3 (Yakima) part # RRT-FK1 (Thule) Rhino-Rack Heavy-Duty Roof Rack Crossbars part # RB1800B-2 Roof Rack Leg Spacer Blocks for Rhino-Rack Heavy-Duty Crossbars part # RRQMHD05 (2).
  view full answer...
• Can I Upgrade To 71" Rhino-Rack Heavy Duty Crossbars Instead Of 59" Crossbars On 2012 Jeep Wrangler?
  For your 2012 Jeep Wrangler Unlimited with hard top, Rhino-Rack recommends using Rhino-Rack Heavy-Duty Roof Rack Crossbars - Black - 59" # RB1500B-2 along with Legs # RRRLT600, Backbone Mounting System # RRRJKB1, and Leg Spacers # RRQMHD05-2. While Rhino-Rack does not suggest using the 71" Heavy-Duty Crossbars # RB1800B-2 that you were looking at, you can certainly use them as long as they are not longer than the widest point of your vehicle which is usually the mirrors. My research tells...
  view full answer...
• Will a Paddleboard Fit a Rhino-Rack Roof Rack on a 2015 Jeep Wrangler with a Hard Top
  Rhino-Rack SG Roof Rack # RRSG60 for rain gutters has a capacity of 88 pounds so provided that your 11 foot paddleboard is under 88 pounds then it can support the board. However, this roof rack has a narrow bar spread of 19 inches from the center of one bar to the center of the other bar meaning you would need to make certain that the board is tied down at the bow and stern and placed so that the weight is evenly distributed to both bars. Also since the crossbars are basically positioned...
  view full answer...
• Is Drilling Required to Install Rhino-Rack Roof Rack on 2015 Ford Transit Connect Long Wheelbase
  I'm not 100 percent certain what you mean by "threaded sleeves" but if your have a 2015 Ford Transit Connect with a long wheelbase, you will need to drill holes in your roof in order to attach the Rhino-Rack RT-Style Roof Rack Tracks # RRRTS547, which is what you will mount the rest of the roof rack system to; there are no threaded holes with which to install this rack. Once the tracks are in place you will complete the installation by adding the Roof Rack Leg Spacer Blocks # RRQMHD05-2,...
  view full answer...
  
• Heavy-Duty Roof Rack with 3 Crossbars for Solar Panels on 2020 Mercedes-Benz Sprinter 2500
  For your 2020 Mercedes-Benz Sprinter 2500 with the standard roof and track system I recommend using the Rhino-Rack HD roof rack system which consists of the following: 71" HD Bars - # RB1800B-3 4-Pack Legs - # RRRLT600 2-Pack Legs - # RRRLT600H Quick Mount Nuts - # RRQMFK11-3 Leg Spacers for HD Bars - # RRQMHD05-3 Please note that the Channel Nuts in RLT600 must be swapped out and the larger, N035A track nut, must be used in the track. The HD Bars have a C-Channel in the top that also...
  view full answer...
• Weight Rating for the Rhino-Rack Gutter Mount Roof Rack on a 2022 Jeep Wrangler Unlimited
  You are correct, the Rhino-Rack SG Roof Rack for Rain Gutters with Vortex Aero Crossbars, # RRSG59 that you linked to is 88 lbs. But don't worry, we have other options. I suggest you consider the Rhino-Rack Backbone roof rack system that starts with the, Backbone System, # RRRJLB1 using Rubber Bases, # RRQMFK06, Spacer Blocks, # RRQMHD05-2 and Quick Mount Legs, # RRRLT600 along with 59" HD Crossbars, # RB1500B-2. This will provide you a heavier rating of 175 lbs. however, please check...
  view full answer...
  
• Rhino-Rack Pioneer Platform Rack for a 2009 Lexus GX 470
  The 60" x 49" Rhino-Rack Pioneer Platform Rack # RR35TB requires specific fit kits and is only compatible with certain vehicles. We do have a Pioneer platform rack that will fit the factory crossbars on your 2009 Lexus GX 470 but unfortunately this is not the correct part number. Instead you need to use the 58" x 47" Rhino-Rack Pioneer Platform Rack # RR42115BF which is a universal fit that is compatible with round, square, elliptical, and most factory crossbars. This rack features mounting...
  view full answer...

Do you have a question about this Accessories and Part?