This 3-1/4" oval vacuum cup lets you mount or hang a variety of objects to most non-porous surfaces. No tools required. A pump-action vacuum creates 120 pounds of pull strength without denting or scratching the surface it's attached to.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody, this is Jeff at etrailer.com. Today we're gonna take a look at the SeaSucker three and a quarter inch oval black vacuum mount. Now this is a three quarter inch pump action vacuum mount that'll mount to most non-porous surfaces, horizontal or vertical. It does attach and move in seconds. Basically, this vacuum cup will mount to metal, glass, or fiberglass in seconds just by simply pumping this plunger. It does have an orange indicator right here on the plunger to let you know when the vacuum cup is secure, and it does have a pull rating of 120 pounds when it's installed.
Basically has this projective cover that you wanna remove, and then when you go to use it out, it really won't attach to this. This is a porous surface. It has to be a non-porous surface. But basically what'll happen is you just put a little pressure down and as you pump this, as you keep pumping it and it's forms a vacuum, you'll see that orange indicator disappear. And once it disappears like that, that means you're all ready to go.
If it all of a sudden starts to leak and you'll see orange again, just go and pump, pump it some more until that orange disappears. And then to remove it on each end, they have these little lips or edges that you can just pull up and it'll release it. So as we mentioned, it's very easy to attach and remove in seconds. Now, on top of this, you notice it does have these slotted holes that'll let you hang your bolt, a variety of objects to it, and in the very center is a quarter inch by 20 stainless steel insert that'll let you attach other SeaSucker products to this unit. It is a rigid plastic material.
It is lightweight and durable. We mentioned it has this nice protective storage cap that'll prevent the vacuum cup from hardening or cracking when it's not being used. All you have to do is just line it up, push it on there until it clicks into place, just like that. And then it'll protect it. This is a full black color, you can see.
This part is made in USA. A few dimensions on this. We're gonna take the cap off, we'll give you the length. From end to end, right at seven and a quarter inches. The width, right about three and one eight inches wide. And then the height up to the very top here, it's gonna be right at two inches tall. But that should do it for our look at this SeaSucker three and a quarter inch oval black vacuum mount.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.