Don't Miss These Holiday Savings!
Use this Snap-Loc self-tapping screw set to attach e-tracks to a metal surface. Built-in washer head for non-scratch installation. Made from zinc-plated steel.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Michael: Hi, there. I'm Michael with etrailer.com. Today, we're going to take a quick look at these Snap-Loc E-Track Self-Drilling Metal Screws. These screws do have a tip to the end of them that's going to allow them to drill into metal surfaces, so that you can mount your E-Tracks to the metal without having to drill a pilot hole. So, it's going to be much easier than having to go through and drill all your holes and then go back and put these screws in or put other screws in to hold your E-Track in place. You can just easily one shot, drill your screw into the wall to hold your E-Track up.This is built with a washer head for a non-scratch installation and for added holding power.
This does give you a break strength of 600 pounds for your E-Track. So, obviously your E-Track is only going to be as strong as your connection. So, if you're putting a lot of weight on there, you're going to want good, heavy duty screws like this, to make sure that that E-Track is holding to the wall. So, all your things won't come tumbling down on top of you or anything that you have stored in your trailer.Now, this set is going to include 20 of these heavy duty, zinc-plated steel screws. These screws are a quarter inch in diameter and right at a one and a quarter inch long.
So, they are going to do a good job making sure that your E-Track is staying connected to your metal wall of your trailer or garage or wherever it is that you're mounting that E-Track for easier storage. So, that's going to complete our look for today. Again, I'm Michael with etrailer.com. Thanks for watching.
Average Customer Rating: 4.8 out of 5 stars (38 Customer Reviews)
Use this Snap-Loc self-tapping screw set to attach e-tracks to a metal surface. Built-in washer head for non-scratch installation. Made from zinc-plated steel.
Are not self drilling, recommend you drill pilot holes prior. Do hold once in though.
These are probably good screws, but they were too short to go through the 3/4" flooring and bite into the frame steel.
Quality product, from a quality service company
Right on time.
These self drilling screws are just that. Drilled right into my cargo trailer wall framing. Made installing my E-track easy.
Perfect for my application!!
These are nice screws but I bought them too short for my application.
Ordered E track and screws
All is g reat
Quality product. Great service. Fair price.
Win - win - win!
Work great
Thanks
Easy to use
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.