Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Replaces 1 end cap for your Stromberg Carlson exterior RV ladder. Fits Stromberg Carlson LA-401 and LA-401B exterior RV ladders. Includes 3 screws.
Features:
Fits:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
So we're going to take a quick look at the replacement plastic ladder rung end cap on a Stromberg Carlson RV Exterior Ladder.So if you cap got damaged or broke off, this is going to be a direct replacement for the ladder rung, to make sure that that edge doesn't have any sharp points to catch your clothes or catch any other items as you're using the ladder. Makes it a little bit safer to use.So get the plastic end cap to replace one side on one rung, and then the hardware to get that installed. We'll have our two smaller screws, and then the longer self-tapping screw to go in the center.And this is designed to use with the Stromberg Carlson Exterior RV Ladder, part number LA-401 or LA-401BA. So all you'll really need to get this installed is a Phillips head screwdriver. Should match up with all three of those screws, and you'll be back out on the road in no time.The cap from edge to edge measures about 2" long, and then about 1" wide. Stands about 5/8" deep, and then our longer bolt from bottom of the head to the end of the bolt is about 2".And that's going to do it for our look at the replacement plastic ladder rung end cap for the Stromberg Carlson RV Exterior Ladder..
Average Customer Rating: 4.8 out of 5 stars (226 Customer Reviews)
Replaces 1 end cap for your Stromberg Carlson exterior RV ladder. Fits Stromberg Carlson LA-401 and LA-401B exterior RV ladders. Includes 3 screws.A very necessary part - many on our ladder were cracked. Expensive but not nearly as bad as replacing the whole ladder.
Bought these to replace a few broken Kemerley pieces for our trailer ladder. It works fine, just as others have noted. Be sure to save old side screws to use on the new ladder rail end though
I was very happy to find this part a year ago. Etrailer is the only place I could find that has it. I ended up buying about eight or so. It did save me from scrapping my ladder. Unfortunately, the screws that come with the product are not the same as the originals: They rust. I wish I had known this before, I thought I was doing the right thing, throwing away all the old screws and replacing it with the new ones. Such a disappointment to utilize the rear of the coach only to be looking at rust stains.
I expect the plastic to last as long as the old ones before they crack; about 13 years.
I would say if you need it for safety; get it, but reuse your old screws.
The pictures show the etrailer oxidized screws and the original 14 year old screws non-oxidized.
Used to replace failing end caps on my RV ladder apparently made by Kemberly Inc, of which I can not locate. The Stromberg Carlson are exact match except for the shorter screws, the new ones are slightly larger. I just used the old short screws instead of the new ones. Saved me from buying a new RV ladder
2006 Sunseeker 2860DS ladder end caps needed replacing. Originals were stamped Kemberly. These were a perfect fit, bought 14 for all 7 rungs, so many were damaged.
Screws are pan head and the end caps counter sunk to fit perfectly. Main screw .25" longer than OEMs, side screws slightly longer than original too.
Using ladder with confidence again.
Bought these replacement parts for my 2008 Montana mountaineer rv ladder. Was climbing the ladder when I heard a pop and noticed a crack in the plastic. The replacement part works great, fit as expected. Bought a couple extra for the next one to go.
Exactly what I needed and when I did a Google search this is the 1st or 2nd site on the list but looking at the picture I knew it was what I needed and was easy to purchase through the website. This is at least my 2nd time purchases through etrailer.com and I will definitely purchase from them in the future. Thanks for making it easy.
Very user friendly ordering process. Parts arrived in a timely manner.
The experience was fantastic.
Fit perfectly!
These caps are a direct replacement for the ends on my Jayco ladder. Shipped quickly. Very happy with the service from Etrailer!
Not cheap but just what I needed to fix up my ladder.
Worked great and is still like new, great product
The end caps were hard to locate but as usual E-trailer had them. The end cap arrived complete as ordered and timely shipment. The items fit perfectly.
Perfect fit and print delivery! GREAT shopping experience!
Took less than 5 minutes to install
Works and looks great
Your service was very good and quick. However, shipping had a problem. George indicated in an email that the delivery would be on Monday by 8pm. I just got it today, 3 days later. Not your fault as the post office fell down on their job. Fortunately I did get the parts before my departure tomorrow to Wyoming.
Replacement ladder rung end came quickly and installed easily with the provided new screw hardware. Works great and now I have a few more that are decomposing after 10 years of OEM service on my 2011 coach.
Ted
4/24/2022
Still working great after a year
The product is great.Sturdy and weather resistant.Makes climbing the ladder to 5th wheel easy again.Thank you for a wonderful product.
Sarah J.
4/16/2019
It is great
I purchased 4 End Caps for my Motorhome step ladder. I was concerned that this product would not fit the replacement part that was cracked from likely UV exposure. The overall replacement was perfect. A little pricey but I was pleased with the result.
These parts were hard to find and E-Trailer had them.
Thomas
10/8/2022
The parts were easy to install and fit perfectly. I took advice from others and reused the original screws. They said the replacement screws rust.
I ordered these to keep on hand for “just in case” while they were in route we had one on our ladder crack! Easy install & perfect fit. 2006 Montana Mountaineer
This was my first time using etrailer. I ordered my parts and they fit just like the original parts. Delivery was in timely manner. I am looking forward to use etrailer mor often when ordering my parts. Very satisfied with their service
Parts fit perfectly
Hello,
We order 10 pieces for the Replacement Plastic Ladder Rung End Cap no 8540-Cp. We are very happy it was the product that we needed.
It did not take long to receive it.
Thanks a lot
Roland
3/16/2019
Good, I have some more left
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jean
10/22/2024
Ladder is probably original to our 2005 newmar & this repair will likely last another 10 years