bing tracking image
  1. Accessories and Parts
  2. Stromberg Carlson
  3. Camper Jacks
  4. Trailer Jack
  5. Legs
  6. Driver Leg
Replacement Lead Jack w/ Drop Leg for Stromberg Carlson Landing Gear - 29-1/2"
Stromberg Carlson

Replacement Lead Jack w/ Drop Leg for Stromberg Carlson Landing Gear - 29-1/2"

Part Number: LG-179013
In Stock
$213.60
Retail:$247.94
You Save: $34.34
Accessories and Parts
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
Replaces the lead jack from your Stromberg Carlson landing gear set (LG-1, LG-3, or LG-183708). Lead leg has mounting location for crank or motor and connects to the follow jack with a cross shaft (not included). 1-800-940-8924 to order Stromberg Carlson accessories and parts part number LG-179013 or order online at etrailer.com. Free expert support on all Stromberg Carlson products. Great prices and Fastest Shipping for Replacement Lead Jack w/ Drop Leg for Stromberg Carlson Landing Gear - 29-1/2". Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (212)
  • Q & A (0)
  • Photos

Stromberg Carlson Accessories and Parts - LG-179013

  • Camper Jacks
  • Trailer Jack
  • Legs
  • Driver Leg
  • Stromberg Carlson

Replaces the lead jack from your Stromberg Carlson landing gear set (LG-1, LG-3, or LG-183708). Lead leg has mounting location for crank or motor and connects to the follow jack with a cross shaft (not included).


Features:

  • Replaces the lead jack for your tandem landing gear
    • Designed for use with Stromberg Carlson models LG-1, LG-3, and LG-183708
    • Can be used with most landing gear sets, including Atwood, Venture, and Lippert models
  • Provides a mounting point for the hand crank or motor (sold separately)
  • Connects to the follow jack in your landing gear set with a connecting rod, or cross shaft (not included)
  • Constructed of heavy-duty steel
  • Includes drop leg and cage pin
  • Made in the USA


Specs:

  • Total lift: 34-7/8"
    • Travel: 19-7/8"
    • Drop leg: 15"
  • Overall dimensions: 32-3/4" tall x 2-1/2" wide
  • Leg length: 29-1/2"
  • Weight capacity: 4,000 lbs
  • Distance between weld stops:
    • Inside to inside: 15-1/2"
    • Outside to outside: 17-1/2"
  • Width of weld stops: 1"


Dimensions


LG-179013 Stromberg Carlson Replacement Lead Landing Jack with Drop Leg and Cage Pin for Fifth Wheel Landing Gear




California residents: click here


Customer Satisfaction Score:


Customer Reviews

Replacement Lead Jack w/ Drop Leg for Stromberg Carlson Landing Gear - 29-1/2" - LG-179013

Average Customer Rating:  4.8 out of 5 stars   (212 Customer Reviews)

Replaces the lead jack from your Stromberg Carlson landing gear set (LG-1, LG-3, or LG-183708). Lead leg has mounting location for crank or motor and connects to the follow jack with a cross shaft (not included).

by:

This is my second time ordering from Etrailer and both experiences were absolutely great. I ordered this lead leg to replace my broken one. A couple days later an Etrailer rep reached out, saying they hadn't received their stock in and would hopefully see them by the end of the week. I had a camp week planned and was nervous of timeline. The representatives at Etrailer were in constant contact with updates, shipped my order out IMMEDIATELY after getting stock in and still had my package to me before their expected delivery date and in plenty of time for me to install it and get my trailer ready for the trip I had planned. Thank you all for another great experience just like the last one.



by:

Perfect fit and easy installation. With a little help from Utube, I had the failed jack replaced in about an hour total with minimal hand tools. Leaving the camper connected to the tow vehicle eliminated any need for jacks and support blocks. Excited to get back in the camping game.



by:

I ordered a Replacement Lead Jack w/drop leg(Stromberg Carlson Landing Gear-29.5") for our 2010 Keystone Copper Canyon Fifth Wheel on Wed. It shipped the same day, arrived Friday evening in great shape. Exactly the piece we needed. Very happy customer. Thank you etrailer.com



by:

I've installed a year ago. Install was perfect! It functions,, perfectly! I would buy again!

Robert R. profile picture

Robert R.

8/3/2024

Works perfectly! Installed just perfectly and setup was quick and easy!



by:

Easy installation. The new landing gears work well.



by:

Worked great!

Robert profile picture

Robert

7/9/2024

Good



by:

The service was excellent, Ed was extremely helpful, and the part was shipped unbelievably fast at a very good price. Highly recommend etrailer.com. Thanks again Ed..



by:

etrailer was $XX more expensive that Amazon, but it said I would get the parts 2 days quicker. I paid the extra money to get them quick, but then they waited 4 days to ship even tho they were in stock. I wish I would have gotten them from Amazon instead



by:

Arrived a day earlier than expected. Parts fit perfectly. The person who helped with my order, making sure it was an exact fit was great! I think her name was Sheila.



by:

The company's customer service people were very helpful, even though they could not specifically guarantee that these legs would fit my trailer. The measurements matched and I ordered them. The legs were shipped right away and received on time. The legs fit, with a little help, in my 2008 Coachman Lite trailer. They work perfectly. I have always had good service with etrailer and the products are great. Thanks also to Melissa who called me to ask why I wanted them shipped to a different address. She understood that RV's break down on the road!

James profile picture

James

10/21/2019

Jacks are still working perfectly after two summers on the road. I would highly recommend these as replacement jacks.



by:

Product was a slight pain to install due to taking off the motor and screws being in tight spots along with battery cables but nothing you can't handle with some spare time. Packaging was damaged which broke the plastic stopper that came included with the bolts but I took the old one and sanded it down to fit the new piece while etrailer made things right and sent new bolts immediately no questions asked. Have camped a couple times now and works seamlessly. I installed on a 2003 Keystone Hornet 5th Wheel.

Ryan profile picture

Ryan

8/13/2020

Follow up. Products been great after a year. No complaints after a solid 30 trips including winter in the mountains.



by:

After calling etrailer and asking for them to confirm the proper part number, I ordered the part and shipping was very prompt. I installed the part a few weeks ago and found it very easy to install and it worked exactly as Stated.

Henry F. profile picture

Henry F.

7/12/2019

After a year the new Landing gear is working perfectly. I have referred other RV’s to Etrailer.



by:

I bought both LG 179013 and LG 179014. They were simple to install on my 2006 Montana fifth wheel. After a year they are working great. Can't tell the difference between these and the original landing gear.

Zank profile picture

Zank

10/18/2017

Still work with absolutely no problems.



by:

Easy to install and works as it should. I carry an extra as a spare in case the other one goes out.



by:

I needed a new landing gear for my 5th wheel toyhauler. Rachel was very helpful, confirming the part number of the item I needed. Ordered on Friday, arrived on Tuesday (early). Install was easy, and works like a charm. Now I can put the gear down and unhook my truck!
Thank you.
You guys ROCK!

Jim G. profile picture

Jim G.

9/13/2018

GREAT! Still working as advertised. Im still a happy camper!



by:

Great service..fast delivery.. We ordered a different one on Sunday and was contacted it was out of stock.. Thanks to Kat for helping us to get another one ordered and that was Monday and we got them on Wednesday!! we have them installed and everything works GREAT!! will recommend ETrailer to everyone!!

Robert S. profile picture

Robert S.

6/9/2017

Awesome company. Fast delivery and we have no problems after installing



by:

product fit perfectly measurements in item description was very helpful.

will buy from you again fast shipping too.



by:

one of the front landing gear jacks broke on our return trip after 3 months on the road. stopped at a rv repair shop in ok city. they wanted 2 weeks to get new jacks and 1500 bucks. decided to get home and figure it out. online investigation revealed etrailer had exactly what we needed, placed order, received 2 new jacks in 4 days. installation was very easy, took about 3 hours to do both. thanks



by:

The legs fit perfect . Both installed in less the an hour . The old ones were atwood but they fit the same . Thanks for getting me out of the dog house . My wife was pleased the 5th wheel was useable again .

Shawn M. profile picture

Shawn M.

8/18/2020

They work perfectly . Glad you guys helped me as the dealer was of no help at all . No help from the 5th wheel manufacturer either . They stopped supporting our RV



by:

I have an 2007 fifth wheel with a single motor driving both lifting legs. I had always had problems stripping gears and slow lifting. So I purchased a second motor and new gear boxes and leg and separated the lifting legs. Now with two motors and two switches Lifting is so much easier and I can now also level the trailer side to side which I could not do before .



by:

This was a perfect fit for my Keystone Cougar 5th wheel. Replacement was quick. I was able to complete the job in under an hour (not including the difficulty of cutting a bolt out that was installed backwards by Keystone). Note that this item does not include the foot. I took the old one off and put it on this leg. Back in business in no time!

Heather A. profile picture
Etrailer Expert

Heather A.

5/10/2018

Tim, thank you for your review. The new foot plate would be part # LG-119225.



by:

came faster than last order. product fits but the tabs for all legs do not fit my ww 5th wheel. had to buzz down the tabs and weld new tabs to the new leg. after that it fits like a glove but that is due to our replacing the existing tabs. i saw nowhere on the website a leg that would be a replacement fit for the ww. otherwise its ok and luckily I have a friend who did the above in an hour or so.

Mike L. profile picture
Etrailer Expert

Mike L.

12/18/2018

The mounting locations can indeed vary from different makes and models of fifth wheel, which is why we list the dimensions of the legs and the locations of the weld stops on the product page.



by:

I have a 2008 Keystone Springdale fifth wheel with Venture landing gear. Currently while on our summer trip my lead leg failed and prevented me from being able to unhitch. I jumped on etrailer.com to see if I could find a replacement and sure enough they listed the exact replacement. Unfortunately after ordering they called me and said that there was a two week back order for the Venture leg. I asked if they had a suitable substitute and they sent me a link with this brand, I went ahead and ordered it. It fit perfect (and was significantly less expensive). Thank you etrailer.com for your help I have since been able to unhitch and we can continue our vacation!



by:

This was an easy to replace part . Everything fit well and it only took me about an hour to do.(I already had the old jack out) Shipping was fast (2 days)
with the free shipping. No complaints at all

James profile picture

James

2/9/2019

I have had no issues with the new jack. It works perfectly.



by:

Haven't had any issues with these landing gear products. Shipping was on time and not damaged. Easy installation videos were very helpful, and grease zerts are handy. Quick release pins working great. I recommend these products.


25
212
Show More Reviews

See what our Experts say about this Stromberg Carlson Accessories and Parts

  • Troubleshooting 5th Wheel Landing Gear That Retracts But Wont Extend
    It could be some internal parts but it could also be the electrical system itself. The easiest way to know if the internal parts are the issue or not is to use the manual override to see if it will extend and retract without any electricity. If it does then you'll want to check your electrical connections but if it doesn't then it's something internal and you'll need to take the jack apart to see what needs to be replaced. Should you decide to replace your landing gear I recommend checking...
    view full answer...
    Image 1 for
  • Are Landing Gear Legs Both Leads When the Set Has Dual Motors
    Hey Travis, thanks for reaching out! Yes, on landing gear where both legs have a motor they will both be considered as lead legs, like the Stromberg-Carlson # LG-179013 you're looking at. If you can let me know what landing gear you have I can help you verify that you get the correct replacement leg for your setup.
    view full answer...
  • Replacement Front Jack for Lippert Ground Control 2.0 Landing Gear
    The correct landing gear leg replacement for the Lippert Ground Control 2.0 that you have is actually the part # LC241846. We have no way of knowing if the # LG-179013 could work for you since it's never been tested although I can see how it looks similar.
    view full answer...
  • Replacement Lead Jack Leg for Stromberg Carlson Landing Gear
    If you have the Stromberg Carlson landing gear, part # LG-1, then the replacement lead leg is part # LG-179013. Since you already have the standard 15-1/2 inches between the weld stops on your current jacks you won't need to move the brackets on your trailer.
    view full answer...
  • Recommended Replacement Lead Leg for a 2008 Forest River Cardinal 5th Wheel
    It sounds like you could use the Replacement Lead Jack w/ Drop Leg for Stromberg Carlson Landing Gear # LG-179013. This replacement lead leg has the same 15 1/2" weld stop to weld stop measurement you mention, has the same 29 1/2" overall height as # LC122533, and has a 4K weight capacity.
    view full answer...
  • Replacement Bearings for Venture Landing Gear Legs (VMC900l-261198)
    It sounds like you have a set of Venture Landing Gear Legs (VMC). Although the manufacturer is no longer in business and we have no way to look up parts for them, we do still have some compatible replacement parts. The Lippert Venture Repair Kit for 5th Wheel RV Landing Gear part # LC146060 for follow leg and part # LC146059 for lead leg being the available gears/bearings. If these do not have what you need then you will need to replace the entire leg, you can refer to the info below for...
    view full answer...
  • Are Weld Stops on Both Sides on the Replacement Lead Jack Part # LG-179013
    There are weld stops on both sides of the Replacement Lead Jack part # LG-179013 which you can see by browsing through the photos on the product page. If you are saying that your weld stops are on the face of the jack then we do not have landing gear legs that have this but I would question how the brackets are installed as that does not sound correct.
    view full answer...
  • Recommended Replacement Lead Jack for a Venture Landing Gear
    The Venture brand you referenced was made by Lippert Components and the replacement lead jack I recommend is the Stromberg Carlson # LG-179013. This will replace your non-working jack for your landing gear. The weight capacity is 3,000 pounds and overall height is 32-3/4 inches by 2-1/2 inches wide.
    view full answer...
  • How to Pick Out Landing Gear Replacement Legs
    The sure way to pick out replacement landing gear for a trailer that will bolt right up to the current brackets is to measure the distance between the mounting brackets (underside of top bracket to top of lower bracket as shown in the diagram) if it is 17-1/2 inches then the # LC333964 would fit and the replacement legs are part # LG-177202 for a lead leg and part # LG-177201 for a follower. If your frame clamps are instead 20-1/4 inches the Ultra Fab part # UF17-943010 would be a direct...
    view full answer...
    Image 1 for
  • Replacement Lead Landing Gear Leg for a 2008 Carriage Cameo 5th Wheel Trailer
    The standard measurement on landing gear legs is 15-1/2 inches between the tabs that are on the actual legs. Despite the 15 inch measurement you have between the brackets the distance is likely 15-1/2 inches between the tabs on the leg. Replacement leg # LG-179013 is therefore a suitable replacement. I have included a link to a video review of this leg for you.
    view full answer...
  • Can the Landing Gear Set RVLG-8HDL Be Used with Two Motors
    The Landing Gear Set part # RVLG-8HDL can be used as a manual system or a single motor electric system. The reason for this is because you can only use a motor with the lead leg and the above set has one lead leg and one follow leg. Therefore, you'd need to obtain an additional lead leg for a dual motor setup, the Replacement Lead Jack part # LG-179013.
    view full answer...
  • Availability of Replacement Lead Leg for Lippert Venture Landing Gear
    We do offer a Replacement Lead Jack w/ Drop Leg for Stromberg Carlson Landing Gear, part # LG-179013 (which is made by Lippert). This part is also compatible with most other brands of landing gear, including Atwood and Lippert (LCI). The weight capacity of this leg is 3000-lbs.
    view full answer...
  • Replacement Lead Leg 2006 Keystone Landing Gear that is 29-1/2 inch
    You can use the Replacement Lead Jack w/ Drop Leg for Stromberg Carlson Landing Gear part # LG-179013 which has an outer tube that measures 29-1/2" long and is the standard RV leg replacement for several brands like Lippert, LCI, Venture, Stromberg etc.
    view full answer...
  • Recommended Replacements For VMC9000L 5th Wheel Landing Gear On A 2007 Fleetwood Prowler 285
    The VMC900L number you found is a determining number and we definitely have a replacement kit for you. And actually two different options. I will say that the measurements you got are a little different than what we have available though, so the mounting straps may need to be relocated to get replacements. I included a diagram of how these will measure for you to check out, but the 29-1/2" overall height matches perfectly. With that said, if you wanted to replace the whole system, the...
    view full answer...
    Image 1 for Image 2 for
  • Replacement Lead Leg for Landing Gear on 2010 Open Range M-337RLS 5th Wheel Trailer
    It sounds like you need a replacement driver leg for the landing gear on your 2010 Open Range M-337RLS 5th wheel trailer. The driver/lead leg is the one with the motor and gearbox attached; the other leg is called the follow leg. Replacement driver legs are shown on the linked page. You will want to try to find a manufacturer name and/or part number on the original jack leg if you can since this will simplify identifying the replacement. One of the most commonly used legs is part # LG-179013...
    view full answer...
    Image 1 for
  • Repair Parts for Venture VMC940RB 5th Wheel Landing Gear
    In case you want to just service your existing Venture VMC940 5th wheel landing gear driver leg you can use gearbox # LG-179015. For a complete replacement lead jack use Replacement Lead Jack with Drop Leg # LG-179013 which is a universal fit that works with major brands. I linked a diagram with measurements so you can compare to yours. For a motor to convert the gearbox and leg to electric operation you can use part # LG-196308.
    view full answer...
    Image 1 for
  • Replacement Stromberg Carlson Landing Gear Leg Because Acme Nut 911-10 is Broken
    I spoke with my contact at Stromberg Carlson and unfortunately the Acme Jack Nut 911-10 is not available as a replacement part. The only option is to replace the landing gear leg. I am not sure which leg needs to be replaced or which landing gear you have but I have attached the replacement legs for the Stromberg Carlson landing gear systems for your reference. The Replacement Lead Leg for Stromberg Carlson Landing Gear - 33-1/2" is part # LG-177202 The Replacement Follow Leg for Stromberg...
    view full answer...
  • Replacement Parts for Stromberg Carlson Landing Gear Legs
    I spoke with my contact at Stromberg Carlson and they do not offer the Jack Nut 911-10 as a replacement part. Therefore, your only option would be to replace the entire landing gear leg. I have attached these replacement options for you as well. There is a repair kit available, the Jack Repair Kit for Stromberg Carlson Landing Gear part # LG-146059 for lead and part # LG-146060 for follow but it does not include the jack nut. Replacement Lead Leg for Stromberg Carlson Landing Gear - 33-1/2"...
    view full answer...
  • Stromberg-Carlson Landing Gear Can Barely Raise Forrest River Toy Hauler Off of Hitch
    There is no alternate gear box available but you may be able to install a second motor and switch, # LG-217884, so that each motor is only doing half the work. This will help the motors to last longer and should raise the trailer a little faster. You may also want to check the battery the motor is pulling from. If it is weak then that would affect the motor performance. Any auto parts store can test a battery for you. If you get a second motor, you will also need to replace the follower...
    view full answer...
  • Solution for Landing Gear Leg 179013 with Bad Nut and Screw
    I wish we had a replacement screw and nut that fit the 179013 but at this time that's not something we have access to. The part you referenced only fits RAM or etrailer.com jack legs. Best solution we have is to replace the leg with the part # LG-179013.
    view full answer...
  • Comparing Lippert and Stromberg Carlson 5th Wheel Landing Gear Lead Leg Kits
    The Lippert Components 29-1/2-Inch Lead 5th Wheel RV Landing Gear Drop Leg # LC179013 and the Stromberg Carlson Replacement Lead Jack with Drop Leg # LG-179013 are virtually identical. If one fits your landing gear the other will too. Lippert Components is the OEM maker of almost all trailer frames and also of many trailer accessory items like jacks and landing gear. They also make the products as OEM items sold under other brand names like Stromberg Carlson.
    view full answer...
  • Fitment of Landing Gear Legs and Motor on 2009 5th Wheel Trailer
    I can help you figure out if these are the replacement parts for you. These three Stromberg-Carlson products # LG-179013, # LG-179014, and # LG-196308 all are compatible together, but we will want to make sure they are a fit for your RV. If you are unsure of what you have on your RV currently, then what you will want to do is check is the overall length of the outer tube of your current the leg and the distance between the frame brackets that hold the landing gear legs. The # LG-179014...
    view full answer...
    Image 1 for
  • What is the Difference Between Landing Gear Lead Legs # LC119102 and # LG-179013
    Landing gear lead leg # LC119102 has bracket stops places on the opposite side of the shaft. Lead leg # LG-179013 is a universal option and has bracket stops on both sides. So if you want you can use the universal leg.
    view full answer...
  • Replacement Part Availability for Stromberg Carlson Landing Gear
    We have quite a few different Stromberg Carlson replacement parts available. You didn't say which you needed. But we have the gear box part # LG-179015, the motor part # LG-142178, follow leg part # LG-179014, lead leg # LG-179013. Replacement switch is part # LG-145236 and foot plate part # LG-119225. We also have repair kits. Part # LG-146059 for the lead leg and part # LG-146060 for the follow leg. That should cover everything, but if you need something more specific let me know!
    view full answer...


< Previous
123. . .6



Do you have a question about this Accessories and Part?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jeff D
Expert Research:
Jeff D
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Adam R
Expert Research:
Adam R
Employee Adele M
Updated by:
Adele M
Employee Laura H
Updated by:
Laura H
Employee Shelly K
Updated by:
Shelly K
Employee Wilson B
Updated by:
Wilson B
Employee Mike S
Updated by:
Mike S
Employee Dustin K
Video Edited:
Dustin K
Employee David F
Test Fit:
David F

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.