Arrives before Christmas 
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Replaces threaded hitch pin and clip for Swagman bike racks with 1-1/4" shank and 2" adapter installed. Works with the Swagman XTC2 (S64670), XC2 (S64650 and S64650-EXT), or Trailhead (S63360, S63365, and S63380) bike racks.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, there. I'm Michael with etrailer.com. Today we're gonna take a quick look at this Swagman replacement Threaded Hitch Pin and Clip for one and a quarter inch Shanks on Swagman Bike Carriers. So this will replace the threaded hitch pin and clip that originally came with your Swagman bike racks, with the one and a quarter inch shank, and the two inch adapters installed. This will work with all the Swagman models that you see listed on the screen there. And because this is a replacement from Swagman, you can trust is going to fit right in place of that original, and you don't have to worry about fit issues, compatibility problems, that sort of thing.
And just like the original, your usable length is gonna be just shy of three inches, sitting right at two and seven eighths of an inch there. So this will do a great job of threading in place to take up some of the slack, to prevent rattling and that sort of thing in your bike rack. And that completes our look for today. Again, I'm Michael with etrailer.com. Thanks for watching.
.
Average Customer Rating: 4.9 out of 5 stars (203 Customer Reviews)
Replaces threaded hitch pin and clip for Swagman bike racks with 1-1/4" shank and 2" adapter installed. Works with the Swagman XTC2 (S64670), XC2 (S64650 and S64650-EXT), or Trailhead (S63360, S63365, and S63380) bike racks.Description led me to believe this the "Replacement Threaded Hitch Pin and Clip for 1-1/4" Shanks on Swagman Bike Carriers" would fit my 1-1/4 Swagman Bike Carrier. It did not.
Excellent threaded pin. Unfortunately it didn't work for me. Not the fault of the pin. Just the wrong thread for Transit Flatbed 2dlx bike rack. I've ordered from several different companies, different pins, hoping to find one that fits. Seems like Transit doesn't make a replacement pin.
Works perfectly for my Swagman bike rack. Cost was much less than ordering from Swagman wi the shipping!
The product was as described. The staff was great about communication and had made it known they cared about the product being the proper fit. They offered alternatives if it did not.
Perfect fit replacement. It’s also great to have a spare when you travel!
Does a good job reducing the bounce and slack in the receiver when loaded with bikes. It's also a possible theft deterrent since a potential thief would need the right wrench or socket to get the bike rack off my rig.
Good quality, good service, good commuhication. Have it as a back up to the one that came with unit.
It was a difficult item to locate. Thankful that etrailer carried it. It works as expected. No complaints.
Part works great and just as expected. Shipped quickly and at a good price.
Quality....
Item as expected. Service was good.
This is exactly what I needed. Thank you so much and I would definitely refer to your company. Greg
Not only is the product perfect for my bike carrier, but all my dealings(reps, products, shipping, prices) and thus far there have only been two, with your company have been great. I would recommend to anyone that they would not be disappointed doing business with you.
Sincerely and thankfully
Allen
7/22/2021
Perfect!!! I can think of more practical, efficient and easier way to transport my bikes, and the product is extremely well built!
Good product excellent sevfice
This has been an easy, secure rack for my bikes which include a very fat snow bike. I had to modify the wheel supports by spreading them open width-wise. The extra 1/2” allowed for the 4.8 x 27.5 wheels to drop in fully. I would recommend that change and it didn’t have any negative effects on carrying my summer trail bikes which still center themselves in the supports without jiggling. I would recommend the carrier to anyone who asks, especially for odd frame configurations, frame packs, or vulnerable carbon fiber material. Occasionally, the ratchets are difficult to adjust when covered in ice but have always managed to make them work with a moderate amount of swearing.
Original replacement for missing parts.
Miguel
4/7/2023
I use the bike rack a lot and the replacement bolt is working as the day one.
I had lost the hitch pin for my Swagman bike rack. Since I bought the rack from Etrailer and had had an excellent experience, I went back and bought two hitchpins just in case. One was a bit delayed but the customer service was excellent. They notified me it would be delayed and followed up. I highly recommend Etrailer
I first ordered a draw Tite Hitch for my 2017 Subaru Crosstrek so that I could mount my previously owned Swagman bike rack. I then discovered that I needed a replacement threaded hitchpin, which I ordered from etrailer.
Both items were delivered in good shape and on time. I had to call the service department for additional assistance, and the person I spoke to went out of his way to get the information I needed and followed through by making several calls to Swagman on my behalf.
I would highly recommend doing business with this company. They offer great service and products at good prices.
Just what I needed, came fast.
lost the hitch pin for my swagman bike rack, searched the internet and saw etrailer had them so new I wouldn't be disappointed. I had purchased from them several years ago. placed order easily and chose standard shipping and received the order within a week. order was correct and part was exactly a great replacement.
I had purchased the bicycle carrier used and it was missing the hitch pin. Customer service was excellent in finding the pin for me.
Wish this bolt was just a bit longer so that the pin could be inserted after threading the bolt into the hitch, but works great even without it. The threads certainly keep the bike rack steady on the hitch.
This hitch pin for my Swagman bicycle carrier threads like the original and clips securely. What a relief to find a replacement that actually does as anticipated!
For less than the cost of just the shipping for the comparable part from Swagman, I was able to purchase this hitch pin from etrailer and get it delivered. Was able to get my Swagman hitch back on my Subaru and am delighted!
I was at a loss as to where I would find a part for myswagman two bike rack. I called swagman and they pointed me to etrailer.com. Friendly, super fast, and got my part in two days ! Awesome.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Brooke M.
5/20/2024
The pin you got is made for xtc2 but sometimes debris or rust can make it hard to fit the threaded pin in. WD-40 and a battery terminal brush like part # DW00254 should take care of that so that the pin can fit.