bing tracking image
  1. Accessories and Parts
  2. Tekonsha
  3. Trailer Breakaway Kit
  4. Battery Charger
Tekonsha Battery Charger for Trailer Breakaway Systems - 12 Volt DC

Tekonsha Battery Charger for Trailer Breakaway Systems - 12 Volt DC

Item # 1024
lowest price pledge
Retail:$32.99
Our Price: $14.01
You Save: 58%
Accessories and Parts
Orders above $99 qualify for Free Shipping
Shipping Weight: 0.13 lbs
Quantity: 
In Stock
Tekonsha Battery Charger Accessories and Parts - 1024
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Need help with installation?
Locate installers near me
This unique charger will maintain the charge of any 12-volt battery that has a minimum output of 4 amp-hours. Great for maintaining the charge on stored vehicles and trailer breakaway systems. 1-833-496-1390 to order Tekonsha accessories and parts part number 1024 or order online at etrailer.com. Free expert support on all Tekonsha products. Guaranteed Lowest Price and Fastest Shipping for Tekonsha Battery Charger for Trailer Breakaway Systems - 12 Volt DC. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (14)
  • Q & A (0)
  • Videos (2)
  • Photos
  • Why etrailer?

Tekonsha Accessories and Parts - 1024

  • Trailer Breakaway Kit
  • Battery Charger
  • Tekonsha

This unique charger will maintain the charge of any 12-volt battery that has a minimum output of 4 amp-hours. Great for maintaining the charge on stored vehicles and trailer breakaway systems.


Features:

  • Maintains the charge for the battery in your trailer breakaway system
    • Also great for maintaining charge on batteries of recreational vehicles, motorcycles, snowmobiles and tractors that are stored in the off-season
  • Works on 12V batteries that have at least a 4-amp-hour output
  • Charges at 300 mA
  • Limited 1-year warranty


1024 Tekonsha DC-to-DC Accelerated Battery Charging Device (ABCD)




California residents: click here


Video of Tekonsha Battery Charger for Trailer Breakaway Systems - 12 Volt DC

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Tekonsha Trailer Breakaway Systems Battery Charger Review

Hi there, safety conscious haulers. Today we're going to be taking a look at Tekonsha's Accelerated Battery Charging Device. It's simply clicks onto your existing breakaway switch battery and then just wires up to your power source and your breakaway switch. The main purpose of this charger is to charge up your small breakaway switch battery, which isn't intended to have a high output and it's also not intended to have a high amount of charging amperage so you don't want to overcharge the battery. Well, this charger will limit the input to the battery so that way it's trickle charging it and you don't overcharge it and ensures it stays topped up without blowing it over. It also limits the output on the circuit going to your breakaway switch, so that way we don't stress our battery out too much when we send the signal out in the event that we have a catastrophic disconnect when our breakaway switch is pulled because our battery does only have a maximum output that it can handle and we want to just make sure everything is under control, so our charger is going to limit all those things for us.This will make a good replacement for an existing breakaway switch battery charger that you have, or if you don't have one already, it's a great addition to help ensure that your breakaway switch battery lasts as long as possible.

We'll begin our installation by accessing our breakaway switch battery box so we can get to our charger. There's four screws on top of this battery box we're going to be taking off. Yours may vary a little bit. We just need to make sure we can get in there so we can access our charger to replace it. I'm going to go ahead and remove these four screws and inside we'll find our existing battery charger.We'll then remove our cover so we can see the wires.

We've got our negative and positive on our battery, and this is our existing charger that we're going to be replacing. Coming off of our charger here, we've got three wires. We're going to be cutting each of these three wires so we can connect our new one. Now the blue one here we don't need to cut, because our new charger already has a terminal on it ready to slide onto our battery, so that one we can actually just pull off of the battery. But we do need to cut the blue and the black wires, so we're going to go ahead and snip both of those.

Since we don't need our charger anymore, it's no good. We can snip it as close as we want to the charger.We're going to take our new charger now. We're going to plug it into the positive on our battery. Then we have two wires that we need to connect here. The black wire is your charge wire, so this is going to connect to the charge wire coming from your seven pole connector.

Now I already tested it and I know that this black wire here is connected to the charge wire on our seven pole connector. We also need to hook our blue wire up, and this is going to actually attach to our breakaway switch. We'll be adding a breakaway switch in this install because our customer currently doesn't have one. His old one was damaged and is long gone, so we're going to need to add one of those and connect it in between.This blue wire here is the brake circuit that goes to the trailer brakes on our vehicle. Our breakaway switch is going to be wired in between those two. So, this will go to breakaway and then from the breakaway we're going here. I'm going to go ahead and help you determine which is your correct wires if you are unsure. We're going to open up our junction box real quick and I'll show you how you can test to determine which is your brake circuit and which is your charge circuit.This is our seven way connector wiring going into it. One of the things we need to make sure of is that we have our charge wire run over to our battery and we need to know which one the charge wire is. On ours it's a black wire coming off of there and it's actually going to this post here that we've put a little bit of black paint on. If you plug your trailer into your truck, that should power that circuit up because it is your charge circuit. You just want to hit your tester on there. We can see we've got power all the time. I've got my tester plugged into the seven pole right, now supplying power on the 12 volt circuit.We also need to determine which is our brake circuit. That's typically your blue wire. I've got my tester on right now, powering up the brake circuit. If you have your truck plugged into your trailer and you have a brake controller, you can use the manual slider to power up that circuit. You may need an extra set of hands with someone holding the slider over so you can run back and test the trailer. Again, that's typically your blue wire, and you can see we've got power on it there. If I turn our tester off, I remove that power, and this would be as if you let off your manual slider. Now that you've identified which circuits we're going to be connecting our charger to, you can ensure you're going to wire it properly. Now since ours already have wires running over to our battery box, we're just going to be connecting it to those. I just wanted to show you how you could determine on your seven pole connector which circuits you needed.We're now back to our wires and again, we explained that this is our power and this is our brake, so we can go ahead and hook up the power wire now, our black one here. We're just going to go ahead and strip that back and we're going to strip the other circuits there back. We're just going to use a butt connector to connect the two together. We are going to use heat shrink butt connectors, as they will seal each end of the wire where we crimp it on, keeping out dirt, debris and moisture, preventing corrosion and ensuring a long lasting connection. I'm just going to slide our circuit in there and then crimp it down. Then over on the other side, we're just going to complete that connection to the black wire.Now for our blue circuit. Again, we do need a breakaway switch, so we're going to be mounting our breakaway switch up. The length of wires are pretty short, so you may need to extend those, depending on where you choose to mount it. We're going to be mounting ours on top of the frame right next to our battery box here, so that way our wires can poke inside of our battery box and we can make all our connections inside. We're going to be attaching it just using a self tapping screw right into the top of the frame. Now, a screw doesn't come included with your breakaway switch, but you can pick up self tappers here at etrailer.com.Sometimes it's a little easier to make the mounting portion of it if you just pull the pin out of it. That way you don't have the wires hanging there. And again, we're going to put it there due to the wire length so it'll fit in our box. Now we're just going to take our self tapping screw and run it down this single hole here in the back. When tightening down your breakaway switch, you want to make sure it does still have some movement, as it does need to swivel for proper operation.We're just snugging it down and then just verifying that it can move. We just don't want it to be so tight that it's very stiff, so that's pretty good there. It can move with enough ease. Because if your breakaway switch is cocked at an angle or it's not right when you have a catastrophic disconnect, it can pull crooked on your pin, which could just break the end of your pin. We want it to be able to move the breakaway switch to where it's in a position where it can pull it straight.Now that we've got our breakaway switch mounted, you can go ahead and plug the pin back in. We're going to route our wires into our battery box here. You may not have a battery box exactly like this, but the main goal is that these two wires need to go to a power source and then the other wire's going to connect to your brake circuit. The charger here is in line and this is going to be the output from the charger for our power, so we're going to connect that one to the blue wire. We can go ahead and strip both of these back.We're going to just crimp them together again using our heat shrink butt connectors. Then the other wire here coming off of our breakaway switch is going to be the output going to our brakes on the trailer, which we know is this wire here. Even though these are blue and black wires in the breakaway switch, it doesn't really matter which wire you connect to which one. We could have hooked the black one to power and then the blue to the output. It really doesn't matter in the switch. It's just completing a circuit. We're going to strip both of these back. The main intention is that you have one of the wires hooked to power and the other one hooked to the brake output. We're just going to butt connector those two together and then we'll hook these two together. Now that we've made all of our connections here, we can use a heat gun to shrink down all of our butt connectors.Now to show you that our charger's working, I've got our old battery here and I've got my test light. The old charger wasn't charging the battery at all. We had nothing. The battery's completely dead. If I check for power on the battery, I don't get anything. We're going to go ahead and turn our tester on, which is simulating your truck. If you we're to plug in your truck, your truck would send 12 volts down its seven pole. We're now doing that, and if we test it now we can see that we're charging the battery.We're now back here at the wheel, and you can see that I can spin it. I've got it jacked up. Now I'm going to go up to the front. I'm going to pull the breakaway pin and we want to verify that our wheel is no longer spinning, that our brakes did apply. I've gone ahead and pulled the pin. Now it's here in my hand. Yep, they are locked up, so we are good to go. Everything's working properly. That completes our look at the Tekonsha's Accelerated Battery Charging Device.


Customer Reviews

Tekonsha Battery Charger for Trailer Breakaway Systems - 12 Volt DC - 1024

Average Customer Rating:  4.7 out of 5 stars   (13 Customer Reviews)

This unique charger will maintain the charge of any 12-volt battery that has a minimum output of 4 amp-hours. Great for maintaining the charge on stored vehicles and trailer breakaway systems.

by:

I haven't installed this yet. My trailer was set up all wrong to be able to charge the battery when hooked up and towing. I bought this as a precation for charging the battery on the hot wire to the trailer from my 7 pin pug.




by:

I purchased this Tekonsha Battery Charger for Trailer Breakaway Systems - 12 Volt DC - 1024 for a back up unit for the one that I have already installed...since I spend a lot of time in the boonies. Easy to install and works great.




by:

Just finished installing and works perfect. Shipped instantly and came early. I like the product and etrailer is my new favorite company. Super customer service and instant response to detail. Nice to see these days! I like most, have come expect way less and its nice to see a company that "get's it". You etrailer get my future purchases without a doubt! Glad I found you.




by:

Delivered as promised




by:

Charger worked just fine. No problems to install. Instructions clear and easy to follow.




by:

hint: it's a wire with a resistor. Effective but I'm not sure how it's patented.




by:

exactly what I was looking for. Installed quickly and works great.




by:

Excellent product

Excellent Se
rvice




by:




by:




by:




by:

exactly as described




by:




by:



14
14

See what our Experts say about this Tekonsha Accessories and Parts



  • How is Tekonsha Break Away Battery Charger # 1024 Wired
    The Tekonsha Break Away System Battery Charger you mentioned, part # 1024 is easy to install. The blue wire connects to the break away switch wire that connects to the battery (not the other leg that attaches to the brake circuit on the trailer), and the black wire connects to the 12-volt accessory circuit from the 7-way trailer connector. I produced a diagram for you, which should make it more clear for you. For more information regarding trailer break away systems, click on the provided...
    view full answer...
    Image 1 for
  • How to Wire In the Tekonsha Battery Charger for Trailer Breakaway Systems - 12 Volt DC # 1024
    I have included a diagram showing how breakaway battery charger # 1024 gets wired into a trailer. Basically, the black wire will connect to the 12 volt wire coming from the trailer connector. The blue wire will go to the blue wire that goes the breakaway switch from the breakaway battery. The red charger part connects directly to the positive battery terminal (not shown in the picture).
    view full answer...
    Image 1 for
  • Trailer Breakaway Switch Smoked/Melted When Trailer Was Unattended
    The Tekonsha Replacement Trailer Breakaway Switch # 420000 that you referenced should work fine as a replacement part for your trailer's breakaway system. As for the cause for a smoking/melting switch, my first thought is a malfunctioning breakaway battery charger. If this unit failed it might have taken out the switch with it. We offer the Tekonsha Battery Charger for Trailer Breakaway Systems # 1024, whose installation is shown in the linked diagram.
    view full answer...
    Image 1 for
  • What Is The Distance Between Bolt Holes On Replacement Tie-Down For Extang Covers EX1024?
    The Replacement Tie-Down for Extang Solid Fold 2.0 Hard Tonneau Covers - Qty 1 # EX1024 that you were looking at measures 1-3/4" between bolt holes on the strap's tie-down and measures 1-1/4" between bolt holes on the clip. I attached photos to further illustrate this.
    view full answer...
    Image 1 for Image 2 for
  • Length of Male Plastic Piece of Replacement Tie-Down EX1024
    The length of the male plastic piece of the Replacement Tie-Down for Extang Solid Fold 2.0 Hard Tonneau Covers # EX1024 is 1-1/2 inches. This is the correct replacement tie-down for the Solid Fold 2.0 Series 83-xxx covers. I have added a link below to a video review for you to check out as well.
    view full answer...
  • Replacement Plastic Clip and Strap Recommendation for Extang Encore Tonneau
    I checked with Extang and for your Encore the Replacement Tie-Down # EX1024 that you referenced is the correct fit.
    view full answer...
    Image 1 for Image 2 for
  • How Long Is the Replacement Tie-Down for Extang Solid Fold 2.0 Hard Tonneau Covers
    The Replacement Tie-Down for Extang Solid Fold 2.0 Hard Tonneau Covers part # EX1024 has an overall length of 11" while fully extended. The buckle is about 1-1/2" long. I have attached a video for you which shows the length measurement.
    view full answer...
  • Difference Between Tekonsha Breakaway Battery Chargers
    You are correct that the only real difference between the Tekonsha Breakaway Battery Charger # 2024-07 and the Tekonsha # 1024 is that the # 2024-07 features an automatic float mode to prevent overcharging of the battery. This is the more ideal charger if you plan on going on longer trips where this might become an issue. As you mentioned both chargers will work well with 12V battery systems that have a 4 amp per hour minimum output. I have attached a short video demonstration on the...
    view full answer...
  • Will Continuously Charging Breakaway Battery from Tow Vehicle Cause Any Damage
    Using the Tekonsha Battery Charger # 1024, or any charger off of the tow vehicle's battery, will not cause any damage to your breakaway switch. The amount of charge will not charge the battery from dead to full but will maintain the charge. In addition, if you leave the trailer plugged into the tow vehicle's connector for a long period of time it will continue to draw power from the vehicle's battery. In this case it is possible to drain the vehicle battery. To avoid the draining you...
    view full answer...
  • Solution to Smooth Out Ride of 2011 Forest River Rockwood Ultra Lite 33 foot Travel Trailer
    One option that might help is the Gen-Y Torsion 2-Ball Mount w/ Stacked Receivers # 325-GH-1024. This is a cushioned ball mount setup that basically gives the ball mount connection of the trailer suspension. This uses torsion springs to vertically cushion the front of your trailer where it connects to the vehicle. It will smooth out the ride noticeably and strangely enough Gen-Y has told us that people get better fuel mileage when they use this as well. Check out the review video I attached...
    view full answer...
  • Is There a Way to Cushion Bounce in RV Camper that has Torsion Spring Suspension
    Since your 26 foot Mini Lite Rockwood has torsion springs we don't have a shock kit for the trailer we can recommend to cushion the ride of it but we do offer a cushioned ball mount option that will prevent a lot of the bounce from the trailer transferring to the tow vehicle. The Gen-Y Torsion 2 Ball Mount # 325-GH-1024 would work great for this. It has torsion springs built into the ball mount which allow the vertical bounce that would get transferred on the tongue weight of the trailer...
    view full answer...
  • Gen-Y Hitch Additional Lifetime Warranty for Rubber Torsion Hitches
    The Lifetime Warranty Option on the Gen-Y Torsion 2-Ball Mount # 325-GH-1024 or any Rubber Torsion Hitch, can only be purchased through the Gen-Y Website. You are allowed to purchase the product from any certified Gen-Y dealer which we are so you will be able to add the Lifetime Warranty from Gen-Y on their website.
    view full answer...
  • What Torsion Hitch Do You Recommend To Tow A Car Hauler With My 2017 Dodge Durango AWD
    After reading your question I am assuming you are talking about a hitch with weight distribution. That is the question I am answering. I think the Gen-Y Torsion 2-Ball Mount w/ Stacked Receivers - 2" Hitch - 5" Drop/Rise - 10,000 lbs, part # 325-GH-1024, will meet your needs. This is a shock absorbing hitch receiver. It has up to a 5" rise/drop and it comes with a 2" and a 2-5/16" ball mount. Please keep in mind that the maximum tongue weight you have to adhere to is the lower of the...
    view full answer...
  • How Much Weight is Needed for Gen-Y Torsion 2-Ball Mount Shock Absorption to Function
    The Gen-Y Torsion 2-Ball Mount w/ Stacked Receivers # 325-GH-1024 requires a minimum of 500 lbs of tongue weight for the built-in shock absorption to function. This ball mount is intended for tongue weights that are 500-1,100 lbs. So you are correct, without enough weight the system will not function as intended. The Gen-Y has a built in scale to help you balance your trailer, which will also indicate if the weight is too little. If you tow trailers that have a tongue weight in this range...
    view full answer...
  • Replacement Extang Tie Down Strap for Solid Fold 2.0
    The Replacement Tie-Down for Extang Solid Fold 2.0 Hard Tonneau Covers - Qty 1 # EX1024 is what you want for the Solid Fold 2.0. It includes the strap and male buckle, but not the female buckle. If you need that you will want the Replacement Female Tie-Down Buckle for Extang SolidFold 2.0 Tonneau Covers - Qty 1 # EX54560402. I confirmed with my contact at Extang that these are the correct parts for you.
    view full answer...
  • What is Causing Back and Forth Bucking on Jeep Wrangler
    While you can use the Gen-Y Torsion 2-Ball Mount w/ Stacked Receivers # 325-GH-1024 with a Roadmaster tow bar like the StowMaster # RM-501 it will not be a solution to fix the back-and-forth bucking you are encountering with your Wrangler. Does your Jeep have a supplemental braking system? If not then that would be the solution, and if you do have one then it may not be working as well as intended. I have added a link to a help article on supplemental braking systems for you to check out...
    view full answer...
  • Recommended Charger for Maintaining Automotive Batteries
    For a car battery you want to use a charger designed for that application, such as one of the CTEK units shown on the linked page. For example, their MULTI US 7002 12-Volt Universal Battery Charger # CTEK56353 is a multi-step, fully automatic charger with pulse maintenance. This can both charge a depleted battery and maintain a charged one. Charging time for 80% charge of a 14-Ah battery is only about 2 hours. I have owned one of the CTEK chargers for several years and it does a good job...
    view full answer...
  • Cushioned and Adjustable Ball Mount for 2020 Ford Expedition Towing Trailers up to 7.5k
    The Gen-Y Torsion 2-Ball Mount w/ Stacked Receivers # 325-GH-1024 is a great and safe choice for a ball mount for your 2020 Ford Expedition. This has more capacity than you'll need, has the two more popular hitch ball sizes, is adjustable in height, and is cushioned so it'll give you a really great towing experience as well. Most report improved fuel mileage with these over standard ball mounts as well. The other thing you'll want is a brake controller (if you don't have one already)...
    view full answer...
  • Is There a Tongue Weight Range for Gen-Y Torsion Adjustable Ball Mounts
    There are ideal tongue weight ranges for the Gen-Y Torsion ball mounts like the part # 325-GH-1224. If you tow a trailer with too low of a tongue weight the torsion spring won't flex as much so the ride quality wouldn't be as ideal. The part # 325-GH-1224 is for tongue weights higher than 1,000 lbs but less than 1,700 whereas the part # 325-GH-1024 (same in every other way) is for tongue weights between 500 and 1,100 lbs. Sounds like your tongue weight is 1,200 lbs which for that you'd...
    view full answer...
  • Replacement Tie Downs For Extang Solid Fold 1 and Solid Fold 2 Hard Folding Tonneau Covers
    First you will need to determine if you have the Extang Solid Fold 1 or 2.0 on your 2014 Ford F-150, as the update occurred right at the same timeframe your F-150 was made. The best way to tell the difference is by the release handles on the tailgate panels. The original Sold Fold has a channel that runs all the way across the rear panel from drivers to passenger side. The Solid Fold 2 does not have a channel that runs across the panel, instead it has a pocket for the rear latch to drop...
    view full answer...
    Image 1 for
  • Can the Gen-Y Torsion 2-Ball Mount Be Used with Weight Distribution and Sway Control
    The Gen-Y Torsion 2-Ball Mount part # 325-GH-1024 is a great heavy duty ball mount option for towing. If you have a weight distribution system then there is another version of this same shank that is designed to accept a weight distribution head, the Gen-Y Torsion Weight Distribution Shank part # GY54FR. I did a review on this if you would like to see what I thought, the video is attached below.
    view full answer...
  • SumoSprings Kit that Can be Used on Gooseneck Trailer with 7,500 lb Axles
    For your gooseneck trailer that has 7,500 lb capacity axles the SumoSprings kit part # SS33HR would work great to provide additional support. They would also hold up just fine when you are loading the trailer as well.
    view full answer...
  • Recommended Shock Absorbing Shank For A Husky Centerline Weight Distribution Hitch
    Your Husky Centerline WDH isn't going to be compatible with the Shocker XRC Cushioned Adjustable Drop Ball Mount # SHK22ZR because it needs a solid shank to mount to. You would the Gen-Y Torsion 2-Ball Mount w/ Stacked Receivers # 325-GH-1024, which would allow you to insert the shank of your Husky Centerline WDH into the stacked receivers. The shock-absorbing design ensures a smooth, steady ride by functioning like a torsion axle to limit transfer of road shock from trailer to vehicle...
    view full answer...
  • Replacement Tie Down Strap For An Extang Solid Fold 2.0 On A 2020 Toyota Tacoma
    Yes the Replacement Tie-Down for Extang Solid Fold 2.0 Hard Tonneau Covers # EX1024 is the only part that Extang offers to replace the male buckle piece you're after. Additionally, this tie down buckle will work with both the: -Extang Solid Fold 2.0 Hard Tonneau Cover # EX83830 if you have a 5' bed, & -Extang Solid Fold 2.0 Hard Tonneau Cover # EX83835 if you have a 6' bed.
    view full answer...


< Previous
12



Do you have a question about this Accessories and Part?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality accessories and parts for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate accessories and part information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Adam R
Expert Research:
Adam R
Employee Laura H
Updated by:
Laura H
Employee Alexander C
Updated by:
Alexander C
Employee Cole B
Installed by:
Cole B
Employee David F
Installed by:
David F
Employee Chris R
Video Edited:
Chris R
Employee Aidan B
Video by:
Aidan B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.