bing tracking image
  1. Accessories and Parts
  2. Tekonsha
  3. Trailer Brake Controller
  4. Wiring Adapter
  5. Plugs into Brake Controller
  6. Vehicle Specific
Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - Nissan and Infiniti

Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - Nissan and Infiniti

Item # 3050-P
Retail:$44.00
Our Price: $16.15
You Save: 63%
Accessories and Parts

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Shipping Weight: 0.18 lbs
Add to cart
In Stock
Tekonsha Trailer Brake Controller - 3050-P
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Install your electric brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the junction box beneath your 's dashboard. 1-800-940-8924 to order Tekonsha accessories and parts part number 3050-P or order online at etrailer.com. Free expert support on all Tekonsha products. Great prices and Fastest Shipping for Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - Nissan and Infiniti. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (997)
  • Q & A (0)
  • Photos
  • Used (1)

2020 Nissan Titan - Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - Nissan and Infiniti

  • Trailer Brake Controller
  • Wiring Adapter
  • Plugs into Brake Controller
  • Tekonsha
  • Vehicle Specific

Install your electric brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the junction box beneath your 's dashboard.


Features:

  • Wiring adapter eases installation of your electric brake controller
  • Custom connector end plugs into the built-in port beneath the dash of your vehicle
  • Other end plugs into the back of your electric brake controller
    • Compatible time-delayed brake controllers: Draw-Tite Activator I (5100), Draw-Tite Activator II (5500), Draw-Tite Activator III (5520) and Tekonsha PowerTrac (39523)
    • Compatible proportional brake controllers: Tekonsha Prodigy (90185), Tekonsha P2 (90885), Tekonsha P3 (90195), Tekonsha Primus IQ (TK90160) and Tekonsha Voyager (39510)
  • Limited 1-year warranty


Installation of Tekonsha Brake Controller Adapter

This adapter plugs into the 6-pin connector on your vehicle's built-in brake control wiring harness. Older models will have the harness located underneath the dash, to the left of the steering column, taped to another harness near the emergency brake pedal. Newer models have the harness under the dash, above the gas pedal.


To install your electric brake controller you need to connect the wiring of the controller to your vehicle. Certain manufacturers offer pre-wired options, typically known as tow packages, wherein these wires are run for you from the dash to the trailer connector on the back of your vehicle. Often, a brake controller wiring harness is included with your tow package. This harness plugs into a port beneath your dash and connects to the four wires of the brake controller. If, however, you have a brake controller with a plug in place of the four loose wires, you can use the Tekonsha adapter.


This adapter requires no hardwiring. It is designed to plug directly into your electric brake controller for the simplest installation possible. Because there are no wires to connect, installation is not permanent. You can unplug and remove your brake controller at any time and securely stow it away.



3050-P Tekonsha Brake Control Wiring Adapter with 2 Plugs

Installation Details 3050-P Installation instructions

California residents: click here


Customer Satisfaction Score:


Customer Reviews

Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - Nissan and Infiniti - 3050-P

Average Customer Rating:  4.9 out of 5 stars   (997 Customer Reviews)

Install your electric brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the junction box beneath your vehicle's dashboard.

by:
2008 Nissan Titan

I purchased the 3050-P quick connect wire harness for the ease of installation.
My 2008 Nissan Titan has the big tow package and I needed an electric brake system.
All I had to do was remove two phillips head screws and the lower dash panel pulls off. Locate the factory brake harness which is taped up at the emergency brake and attach the two together. I routed the harness to the right side of the lower dash because I'm right handed but, there is enough wire to move it to other areas within reason.
I also purchased the pod Pro Series 80500 which serves 1 or 2 axel brake systems. I mounted it to my lower dash on the right side within reach and it plugs right into the wire harness.
I have not had chance to use the new system yet but, am confident that etrailer has sold me a system that will work for me.

Bill G.

6/4/2018

works perfectly



by:

I received the Prodigy 3 brake controller very quick. It was a plug and play. Installation was completed in less than 30 minutes. Etrailer are the best.



by:

Janet was very helpful in answering my questions and helping me select the correct trailer brake controler for my 2007 Nissan Frontier. Didn't need to cut and crimp wires, it was all plug and play. I needed it ASAP and got it in two days. It's good to have customer service in the U.S. and not have to struggle with foreign accents. Thanks etrailer!

Walter

3/6/2023

The controller and cable are still working well, no problems.



by:

Excellent quality of materials, fit perfectly fine on our 2018 Infiniti QX-60. Just make sure to take the cap off from the break connector in order to fit the plug and play wire harness. Cap is attached.

Thanks,

Alex S.

8/8/2020

The product has been working flawless.



by:
2015 Nissan Xterra

It was easy to use this short wiring harness to connect a Tekonsha Prodigy P3 brake controller to the factory installed under-dash connector on our new 2015 Xterra. ALL 2015 Xterras have that under-dash connector, regardless of trim level or model. Previous years may also, just look for the white 6-conductor connector that is taped to a wire bundle under the dash above the right side of the driver footwell (see my photo). The cable was just the right length to make the connection to the brake controller mounted to the plastic panel just up from the hood release tab (see the other photo). Because the brackets supplied with the controller would have placed the controller about an inch from the dash surface, creating a knee-banger situation, I instead use some industrial quality 3M dual-lock fastener (like velcro on steroids) to mount the controller. The controller is securely mounted right up against the dash panel, but is still is removable, if needed.
If you also need a rear 7-way connector harness and the relays that all plug into the factory installed connectors, I highly recommend #118266. It provides everything you will need except for the bracket to mount the 7-way connector to the bottom lip of the rear bumper, see #TM76474.



by:
2017 Nissan Frontier

I purchased this along with the brake controller for my 2017 Nissan Frontier. Very easy to install and has been working flawless for me.



by:

Product was correct,fit,on time and simple to install. All the above are very uncommon these days. First time I have used etrailer won't be the last.Thanks.

Don

1/11/2024

Still works great.



by:
2017 Nissan Titan

I ordered this with the # 90195 Tekonsha P3 Trailer Brake Controller. This adaptor is perfect, no cutting into wires or using wire taps, just plug and play, that's the way I like doing things looks more like factory install. worked out great for me on my Nissan 2017 Titan. way to go



by:

I am still very much satisfied with my Tekonsha brake system and harness. It has continued to work flawlessly and has prevented an accident on more than one occasion. I’m glad I spent the little bit extra considering the ease of installation and continued reliability!



by:
2006 Nissan Titan

Simple plug and play with my 2006 Nissan Titan, and etrailer staff was extremely helpful

Andrew

11/16/2022

Still works like new! I tow a car hauler very often, and this controller and harness has held up as expected.

Andrew

11/28/2023

Still working good :



by:

This one worked great. I had previously bought one from another online retailer (exact same part) and for some reason it would not hold the connection with the electric brake controller. It would lose power, basically turn off when on the road. A call to Tekonsha was no help what so ever!



by:
2012 Nissan Frontier

I'm very happy with the service I recieved for the break control and wire harness. Here's a picture of it installed in a 2012 Nissian Fronteir. Thank you. Mark R.



by:
2017 Nissan Armada

I had a little difficulty making sure that this was the correct adapter for my 2017 Nissan Armada, but it is. They are the same connector as 2015.

I also had trouble locating the factory pre-wiring and tgere was nothing in my Nissan owners manual that I could find. If you have a 2017 Armada the pre-wiring is on the right side of the steering column, above the accelerator (see pic). From what I understand, on the previous generation vehicles, the pre-wiring was on the left side near the e-brake.

As far as the product itself, it works, fit properly, and the wiring is solid.



by:
2019 Nissan Frontier

Seems it was tailor-made for our Frontier. The ease of installation is only surpassed by a leading name in brake controllers.



by:
2023 Nissan Frontier

Delivery dates were changed a few times. I ordered item # 3050-P, However, item I received was marked 3050. It worked ok. Only problem was trying to locate area where to plug in wiring adapter underneath Frontier dash board.



by:
Infiniti

Tekonsha Prodigy P2 Trailer Brake Controller And wiring harness purchased to pull 20’ enclosed trailer on my Infiniti QX 80. Installation was easy and correct the first time. Controller works great. Thank you etrailer



by:
Nissan Frontier

This was the correct part for my frontier. Took 2 min to install.

Brian

9/7/2023

The adapter is still working great.

Etrailer Expert

Mike L.

10/28/2023

@Brian Awesome, glad to hear that!


by:

Plugged right into the vehicle’s wiring harness and works well with my Tekonsha brake controller



by:
2013 Nissan Frontier

Installed in 2013 Frontier Kingcab with 7-wire Nissan factory harness. With the Tekonsha wiring adapter it simply plugged-in, cable-tied to the under-dash wiring and was done. Rather than drill the dash for the mount, the mounting bracket was velcro'ed (adhesive backed) to the flat area between the seats (slightly under the dash). See attached picture. Appears to be functioning well with no issues.



by:
Nissan Frontier

Good product and a really nice addition for trailer brake usage with a Nissan Frontier. Plug and play with the right harness. Also Etrailer is great to deal with!



by:

The trailer brake was so simple to hook up and works amazing

Tim L.

9/2/2015

After one year of using this controller I would never go back to any other brake controller



by:
2011 Nissan Frontier

The brake control harness I purchased from etrailer was exactly what I need and was very easy to install; especially with their product video showing step-by-step installation process. The harness works great with my Tekonsha Primus IQ brake control for my 2011 Nissan Frontier. Great product, great process and delivery came in less than a week.



by:

I have a 2016 Nissan Frontier with the factory towing package. Etrailer.com could not confirm that the wiring adapter works with my vehicle.

The sales rep I spoke to at etrailer.com was super patient and accommodating. I bought the product not 100% sure if it would fit.

It fits! Super easy install. Plugged one end into the harness under the dash and the other end into the Tekonsha brake controller. Under 1 minute install!

Thank you etrailer for a great buying experience!

Gregory

8/8/2021

A year later and still as happy as the first day I bought the product!



by:
2017 Chevrolet Silverado 3500

I traded in my Ford E350 for a new 2017 Nissan 3500 NV and realized that I no longer had a break controller for my van. The dealer didn't have any in stock and didn't offer installs so after a brief search on etrailers I found the right product, which even included the easy to use cable harness connector and I was able to install my new break controller in about 30 mins!



by:

Great equipment. Easy to install and works great.


25
997
Show More Reviews

See what our Experts say about this Tekonsha Accessories and Parts

  • Location of Brake Controller Connection Port in 2006 Nissan Xterra
    I think you might be looking at the wrong connector. The connector that the brake controller wiring adapter would plug into is located above the emergency brake pedal. It will be a white rectangular connector with 2 rows of three pins. The connector will be taped to another wiring harness. Sometimes the connector can be behind the harness its taped to, making it difficult to see. The photo shown for the 3050-P is an actual photo, the connector you are looking for will resemble the connector...
    view full answer...
  • Where is the Factory Brake Controller Plug Located on a 2011 Nissan Titan
    The factory trailer connector on a 2011 Nissan Titan will be located underneath the dash and left of the steering column, taped to another harness near the emergency brake pedal. There will be a 6-pin connector that mates with the one on the adapter.
    view full answer...
  • Where Is The Brake Controller Wire Harness Located On The 2021 Nissan Titan
    The brake controller harness that you will plug Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - Nissan and Infiniti # 3050-P will be located under the driver side dash panel to the left of the steering column, near where your left foot would be. I have linked some install videos that will help you locate the wire harness. Sometimes they can be hidden behind other wires and in some cases depending on the factory it was produced at the wire harness may be taped or zip tied...
    view full answer...
  • Where is the Brake Controller Adapter Plug In on a 2020 Nissan Pathfinder
    The brake controller adapter plug can be found by checking near the parking brake pedal for a main harness; you'll follow that main harness up and look for an offshoot (sub harness) of the main harness, doubled up and taped to the main harness about half way up behind the dash. You may want to remove the fuse box cap to get a glimpse at it. The cap is white with no wires coming out of the top and held by fabric black tape. There is a cap that has to be removed, which you'll just press...
    view full answer...
  • Recommended Plug-in Adapter For Prodigy Brake Controller On 2017 Nissan Titan
    The plug-in adapter that will work with your 2017 Titan is part # 3050-P. The vehicle harness is located beneath the dash to the left of the steering column. I have attached a photo of the vehicle connector you can use to plug the # 3050-P into.
    view full answer...
    Image 1 for
  • 2017 Nissan Pathfinder Factory Harness for Brake Controller
    Based on the picture you submitted and the info we have on your 2017 Nissan Pathfinder the harness your dealer gave you is correct. It matches the # 3050-P which is the correct harness from Tekonsha. Most likely you have found the wrong harness on your vehicle and you need to check again to find the correct one. The harness will be located underneath and left of the steering column, taped to another harness near the emergency brake pedal.
    view full answer...
    Image 1 for
  • Locating Factory Brake Controller Plug 2017 Nissan Pathfinder
    Thanks!! I am posting them on this page to help future customers with a Pathfinder like your 2017!
    view full answer...
    Image 1 for Image 2 for Image 3 for Image 4 for
  • Connection Point for Tekonsha Brake Controller Wiring Harness # 3050-P, 2004 and Newer Nissan Titan
    The Tekonsha Brake Controller Wiring Harness, # 3050-P, that fits the 2004 and newer Nissan Titan plugs into a harness that is already on the vehicle. This harness will be located under the dash, to the left of the steering column, taped to another harness near the emergency brake pedal. The wiring functions of this harness are as follows: White = ground Black = 12 volt power Blue = brake controller output Red = stop light
    view full answer...
  • Troubleshooting a Tekonsha Plug-In Adapter # 3050-P Install on a 2013 Nissan Pathfinder
    You may have found the wrong connector on your 2013 Nissan Pathfinder to install the Tekonsha Plug-In Wiring Adapter # 3050-P. The harness is located underneath the dash, to the left of the steering column, taped to another harness near the emergency brake pedal. I attached an install video and installation instructions for this product for you to check out. This may help you determine if you have found the correct harness or not. If the # 3050-P you received does not look like the picture...
    view full answer...
    Image 1 for
  • Wiring Tekonsha Brake Controller into 2014 Infiniti QX60
    I spoke with my contact at Tekonsha and he confirmed that the wiring harness # 3050-P is the correct harness to install your brake controller in your 2014 Infiniti QX60 with factory Tow Package. Simply plug one end of the adapter into your brake controller and then plug the other end into the junction box beneath your vehicle's dashboard. For install details and some product demonstration videos, click the provided links.
    view full answer...
  • Brake Controller Stopped Working with Brake Pedal on a 2010 Infiniti QX56
    When there is no power to the red wire on a brake controller that plugs into a vehicle then the likely culprit is a blown stop light or CHMSL (center high mount stop light) fuse. If the brake controller is hardwired to the vehicle then check the wire to which the red brake controller wire is connected. If that wire has power but the brake controller red wire does not then you will need to make a new connection. If the wire does NOT have power then it goes back to a blown stop light or...
    view full answer...
  • Adapter Recommendation for 2015 Nissan Pathfinder for Installing Brake Controller
    The connector that attaches to the wiring adapter, part # 3050-P on your 2015 Nissan Pathfinder should be located under the dash near the brake pedal. There should be a 6-pin connector that mates with the 3050-P. Since you mentioned you have the factory tow package, the plug should be in the location mentioned above. If you are not able to locate the plug, you may want to check with your dealership for the plug location.
    view full answer...
  • Where is Brake Controller Install Port in 2014 Nissan Titan
    I only see one picture that you sent in and it shows an OBDII connector which is not what you need to connect to for a brake controller. The harness you need is the part # 3050-P. The harness it plugs into will be located under the dash, to the left of the steering column, taped to another harness near the emergency brake pedal.
    view full answer...
    Image 1 for
  • Where is the Brake Controller Adapter Plug on a 2021 Nissan Titan
    We haven't installed a brake controller using an adapter like the Tekonsha # 3050-P on a 2021 Nissan Titan yet, but the plug you're looking for is typically located under/behind the driver's side dash panel to the left of the steering wheel and should be labeled "Electric Brake Connector". You may need to remove that dash panel if you can't access it by reaching up under the panel. I've linked a video of a brake controller installation on a 2015 Nissan Titan that uses the # 3050-P and...
    view full answer...
  • Which Tekonsha Brake Controller Install Harness Fits 2012 Nissan Frontier
    Yes, the brake controller install harness part # 3050-P would be the correct part you'd need to install your Tekonsha brake controller in your 2012 Nissan Frontier. The black connector of this should plug right into the back of your controller in place of the harness there but worse case scenario you could cut off the harness and splice it color by color and you'd be fine.
    view full answer...
  • Where is Brake Controller Install Port on a 2016 Nissan Titan XD
    I have attached a brake controller installation video on a Nissan Titan for you to check out. It shows exactly where the brake controller harness will be located under the dash. The truck in the video is a 2008 model, but it will be the same for your 2016 model. I have also attached a photo of the under side of the dash that shows where the harness will be located. The harness will be located underneath and left of the steering column, taped to another harness near the emergency brake pedal....
    view full answer...
    Image 1 for
  • Location Of Vehicle Brake Controller Plug Under Dash On 2015 Nissan Pathfinder
    Thanks for getting that info to us. We have heard of a few people having the issue you described and it's good to have this info for the next person to come along.
    view full answer...
  • Does Brake Controller Install Harness # 3050-P Fit 2021 Nissan Titan
    The brake controller install harness # 3050-P that you referenced is a fit for your 2021 Nissan Titan. The label you have found on yours looks to be very outdated.
    view full answer...
  • New Install Wiring Harness for Tekonsha Brake Controller in 2012 Nissan Frontier
    Depends on what brake controller you have, but if you look at the back of your brake controller and you see what looks like an L-shaped connector where the wires all plug into which then plugs into the back of the connector you can simply replace that with the # 3050-P. Otherwise you'd have to use the # 3050-S to hardwire the controller to a connector compatible with your 2012 Nissan Frontier.
    view full answer...
  • Does Tekonsha PowerTrac Electronic Brake Controller Remain On all the Time
    The Tekonsha PowerTrac Electronic Brake Controller # 39523 that you referenced will always be powered on in a sense but after around 15 minutes of inactivity it goes into sleep mode which basically means it doesn't drain the battery of the vehicle at all. There would be no need to add an off/on switch.
    view full answer...
  • How to Install Tekonsha Brake Controller on 2006 Nissan Frontier with Factory Tow Package
    The harness will be located underneath and left of the steering column,taped to another harness near the emergency brake pedal. I am sending you a link to installation instructions that explain where to find the harness and a picture of the location. On the Tekonsha Brake Controller with Wiring, # 90885 and # 3050-P, it comes with the Nissan plug wire you are asking about so you would not have to buy that separately. Since your 2006 Nissan Frontier has the factory towing package all you...
    view full answer...
  • Locating Brake Controller Connector on 2005 Nissan Titan
    So what you are saying is that the plug physically will not insert into the connector, is that right? I spoke with my contact at Tekonsha, who tells me that you might be looking at the wrong connector under the dash. He said that the connector you are looking for is actually pretty difficult to find. It is located above the emergency brake pedal, and is easier to see and access if the emergency brake is engaged. The wiring harness should have a tag taped to it that says Electric Brake...
    view full answer...
    Image 1 for
  • Installing a Brake Controller on a 2004 Nissan Titan with Factory Tow Package
    The folks at the Aluminum Trailer Group sent you to the right place. There are a few different routes you can take to install a brake controller on your 2004 Nissan Titan. Since it came with the factory tow package, you could simply purchase the Tekonsha Prodigy P3 Brake Controller, # 90195, and splice the included universal harness to your OEM harness that was included with the truck. The wires on the brake controller harness are listed below. Black - 12v Battery Feed Blue - Brake Output...
    view full answer...
  • Brake Controller Installation on 2010 Nissan Titan
    All 2010 Nissan Titans came equipped with the connector under the dash, which is located between the steering column and the emergency brake pedal. I have provided a photo showing where the plug is located. The Tekonsha Prodigy P2 you mentioned is a very good brake controller that would be a great choice. You would also need the Nissan Brake Controller Wiring Adapter, part # 3050-P. The controller would mount to the underside of the dash within easy reach of the driver, usually to the...
    view full answer...
    Image 1 for

Do you have a question about this Accessories and Part?


Used Items Available
Used Picture for Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - Nissan and Infiniti

Condition: Like New

Notes: May have damaged packaging or minor cosmetic blemishes.

Our Price: $15.95
Add to Cart
Secure Checkout

Info for this part was:

Employee Jackie C
Expert Research:
Jackie C
Employee Mike L
Expert Research:
Mike L
Employee Robert G
Expert Research:
Robert G
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Zack K
Video Edited:
Zack K
Employee Jacob T
Video Edited:
Jacob T
Employee Lindsey S
Written by:
Lindsey S
Employee Joshua S
Video by:
Joshua S
Employee Dustin K
Video by:
Dustin K
Employee Chris R
Video by:
Chris R
Employee Schuyler H
Video by:
Schuyler H
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Isabelle B
Updated by:
Isabelle B
Employee Brent H
Test Fit:
Brent H
Employee Robert C
Test Fit:
Robert C
Employee Ryan G
Test Fit:
Ryan G
Employee Bradley B
Installed by:
Bradley B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924