Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - Ford
(107 reviews)
Price: $14.55
In Stock
Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - Ford
Item # 3065-P
Our Price: $14.55
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (107)
- Q & A (0)
- Photos
Tekonsha Accessories and Parts - 3065-P
- Trailer Brake Controller
- Wiring Adapter
- Plugs into Brake Controller
- Tekonsha
- Vehicle Specific
Install your electric brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in harness beneath your vehicle's dash.
Features:
- Wiring adapter eases installation of your electric brake controller
- Custom connector end plugs into the built-in port beneath the dash of your vehicle
- Other end plugs into the back of your electric brake controller
- Compatible time-delayed brake controllers: Draw-Tite Activator I (5100), Draw-Tite Activator II (5500), Draw-Tite Activator III (5520) and Tekonsha PowerTrac (39523)
- Compatible proportional brake controllers: Tekonsha Prodigy (90185), Tekonsha P2 (90885), Tekonsha P3 (90195), Tekonsha Primus IQ (TK90160) and Tekonsha Voyager (39510)
- Limited 1-year warranty
Installation of Tekonsha Brake Controller Adapter
This adapter plugs into the connector beneath your vehicle's dashboard. To reach the connector, remove the storage pocket that is built into the center of your dash, just above the ashtray. Once you have removed the pocket, you will see the gray, 4-pin connector that mates with the adaptor.
To install your electric brake controller you need to connect the wiring of the controller to your vehicle. Certain manufacturers offer pre-wired options, typically known as tow packages, wherein these wires are run for you from the dash to the trailer connector on the back of your vehicle. Often, a brake controller wiring harness is included with your tow package. This harness plugs into a port beneath your dash and connects to the four wires of the brake controller. If, however, you have a brake controller with a plug in place of the four loose wires, you can use the Tekonsha adapter.
This adapter requires no hardwiring. It is designed to plug directly into your electric brake controller for the simplest installation possible. Because there are no wires to connect, installation is not permanent. You can unplug and remove your brake controller at any time and securely stow it away.
3065-P Tekonsha Brake Control Wiring Adapter with 2 Plugs
Installation Details
This Product Fits The Following Vehicles
- 2005 - 2007 Ford F-250 Super Duty with factory 4-Flat
- 2005 - 2007 Ford F-250 Super Duty with factory 7-Way
- 2005 - 2007 Ford F-350 Super Duty with factory 4-Flat
- 2005 - 2007 Ford F-350 Super Duty with factory 7-Way
- 2005 - 2007 Ford F-350, 450, and 550 Cab and Chassis with factory 4-Flat
- 2005 - 2007 Ford F-350, 450, and 550 Cab and Chassis with factory 7-Way
California residents: click here
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Product did not meet expectations
- Alternate product found
Customer Reviews
Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - Ford - 3065-P
Average Customer Rating: 4.9 out of 5 stars (107 Customer Reviews)
Install your electric brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in harness beneath your vehicle's dash.by: Ben B08/16/2017
2005 Ford F-250 Super Duty
Arrived on time. Install into 2005 f250 was simple using the plug in wiring harness I order with the Prodigy 3. I removed the in dash storage pocket and cut a hole in the back of the pocket to run the wiring harness, reinstalled pocket, installed bracket, plugged up controller. Looks great (see pic)
I have not pulled trailer yet but expect great performance. Thanks etrailer
by: Charles 11/10/2023
Perfect unit; saved a boatload of work.
by: Mike03/31/2017
Ford
I ordered the Tekonsha P3, and the Ford wiring harness to replace a failed factory trailer brake controller. Installation was less than 10 minutes. ETrailer is so on it, I received a call the day I ordered saying I had missed the shipping cut off for the day, I had paid for 2nd day, and she wanted to make sure I was ok with still going that route. Crazy good on the customer service. Thank you very much. Everything was as advertised. Video service on your website was a huge help as well.
by: Bill - American Dock Mfg.03/28/2018
2005 Ford F-250 Super Duty
eTrailer provides superior advice as well as excellent pricing and delivery. Based on eTrailer's recommendation, we installed the Tekonsha P-3 Proportional Brake Controller (PN 90195) along with the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - Ford (PN 3065-P) on our 2005 F250 Super Duty to replace the OEM controller due to the OEM controller sending insufficient voltage to our 40ft., 26000lb., GVW FB trailer brakes. It took less than 20 minutes to install and works perfectly. It easily adjusts to advance or slow trailer braking and the inertial sensor on this unit works flawlessly. We are extremely happy with these products. Now if only we could permanently disable the TBC error warning light on the dashboard.
by: Brent M.08/08/2016
Installed these on a 41' Landmark Key Largo and, holy cow, I can stop it now! Wish I'd had these in the mountains!. Product arrived intact but boxes were nearly destroyed. Need heavier packaging for the weight. But everything was present with no damage.
Installation was straight forward with no issues encountered. Take some time to plan your brake line installation to avoid future problems. I installed some square tubing across the frame to mount things to because there wasn't anything there. Nothing beneath the chloroplast in that area that would need servicing so it should work out well.
These were well worth the time and money. Just pull out in front of me now! (No please don't.)
by: Neil12/29/2022
The brake wiring has been in place for a year + and is working well. etrailer is always my first choice on anything related to my vehicles and trailers.
by: Heath06/26/2017
Chevrolet Colorado
Fast shipment and works great. Really makes a difference with the trailer slowing down and breaking on the mountain roads in Colorado.
Heath
7/9/2018
Great, still good.
by: Leon 05/18/2023
Always helpful people and great support!
by: Blaine06/05/2019
Ford F-350 Super Duty
I can not say enough about how great E trailer and James were to deal with. I had 2 brake controllers fail exactly 1 month after they were installed and this company stood behind their warranty and replaced them both. After the second failure I brought my F350 to my mechanic. He spoke to the tech experts at E trailer and discovered the problem may have been excessive ripple/noise in the output of my alternator. We replaced the alter and E trailer sent a third controller to my mechanic. It has worked flawlessly since that repair. These folks are the best at customer service, I can't express my appreciation enough. I will only use and recommend them in the future.
by: Kate11/24/2017
we Purchased an additional tow vehicle for our 5th wheel so we purchased another P3 brake controller from etrailer. Very simple product to install to your factory controller if it has one already. If not it takes a touch more effort to find the wires under the dash, but we love this controller and the ease of use and features it has
by: Scott B.06/14/2015
Received the Tekonsha P3 brake controller and wiring adaptor the other day. Installation couldn't be easier, a ten minute job thanks to the pictures on etrailer showing where to find the tow package plug on my truck. Great little unit with tons of features.. Shipping was extremely quick!
by: Anthony 10/19/2019
2007 Ford F-250 and F-350 Super Duty
My break controller was shipped fast and was easy to install (less than 5 minutes).
I haven't used it yet but will try it out in the next few weeks.
Tony
10/20/2020
Great product & worked better that the Factory builtin.
by: Chris H05/08/2014
Excellent customer service -quick turn around on order! The Brake controller and wiring harness were a great fit and easy to install... glad to finally be rid of the typical "TBC Fault" issues that plague the factory equipment! Thanks again E-Trailer!
by: Mike J05/18/2015
2010 Ford F-250 Super Duty
Plug and play installation made this incredibly simple. I went to 3 autoparts stores prior to ordering from etrailer, and nobody had anything that would fit the factory connection on my 2005 F250 superduty. Went online and found exactly what I needed. Shipping was quick, and had it installed about 10 mins after opening the package. Etrailer's videos are great.
by: Adam04/19/2018
2006 Ford F-250 and F-350 Super Duty
Plugged right in. Now my trailer brakes work. My truck is an xlt so, it didn't come with a factory trailer brake controller but, the harness was there.
by: Pete M.11/03/2017
Ford F-250 Super Duty
Great service Stacy A spent time explaining options, Pros and cons. Very friendly and knowledgeable. Product works great - F250 trailer brake controller Tekonsha P3 was a breeze to install. Better then factory!
by: Ray W06/15/2013
2005 Ford F-350 Super Duty
I have a 2005 F-350, replaced OME brake controller with a Prodigy P 3 [90195] and wire adapter 3065-P. It plug right in the truck's 7 way wiring works great.
Ray
by: Shawn T07/18/2017
2006 Ford F-250 Super Duty
Well designed, great length, simply plug and play. Once I had access to the brake controller plug in my 2006 f250, this adapter plugged right into it. I plugged the other end into my new brake controller and it was running.
by: John10/31/2017
2006 Ford F-250 and F-350 Super Duty
The wiring harness looked perfect and easily plugged into the Tekonsha brake controller and the vehicle. No issues at all. Great product quality once again!
by: Joe 11/18/2019
Works a described. Plugged right in to our motor home then into the brake controller box.
by: Jackson11/28/2014
This is a snap I cant believe it only took me less than 5 minutes to install. The website has the location of the harness on the truck so easy. I also was going camping and needed a rush order E Trailer exceeded my expectations
by: Gary08/16/2019
Quick delivery got my trailer brake module 5535 draw-tite I command and harness took me about 15 minutes to install will be using it in a few weeks don't see any reason why I won't be satisfied with it
by: Jeff04/21/2018
Ford F-350 Super Duty
So far so good. I used it to replace the stock brake controller on my F350. It was very easy to install have not tried it yet but it looks great and about half the price
by: Joseph S. Jr10/27/2015
This was by far the best experience I had with a company. Turn around time was awesome and I was informed when my product was shipped to me along with tracking information provided. Thanks for everything.
by: John W04/01/2017
I received everything I ordered in a timely manner. The product is everything I expected. I have not installed it yet but seems like. I problem. I did receive a personal phone call when my order was shipped. It had easy tracking. This is a great company and they exceeded all my expectations.
25
107
Show More Reviews
See what our Experts say about this Tekonsha Accessories and Parts
- Where Can I Get The Factory Connector The Tekonsha Adapter 3065-P Connects Into? You will need to visit a Ford Dealer or find a used truck you are able to remove the factory side of the connector from. The Tekonsha Plug-In Wiring Adapter # 3065-P is used on a 2005-2007 Ford F-250, F-350, F-450 and F-550 trucks with factory tow package wiring.
view full answer... - Brake Controller Replace Recommendation for 2006 Ford F-250 with Integrated Brake ControllerTo install a brake controller like the Tekonsha P3 Brake Controller part # 90195 in your 2006 Ford F-350 you will use the wiring harness # 3065-P. The harness will plug it into the factory plug after disconnecting it from the factory controller, and then taking the truck to a dealership to clear the fault code that will appear. I have included a link to a Tech Bulletin that explains what they do at the dealer to clear the fault code.
view full answer... - Replacing OEM Brake Controller in 2006 Ford F250 With Tekonsha Prodigy # 90885Ford had some issues with the OE brake controller on the 2005-6 Super Duty trucks. Bypassing the OE controller and installing an aftermarket model like the # 90885 Tekonsha Prodigy is a common procedure. We actually have a help article that addresses this, to see it click the provided link. The aftermarket controller would install under the dash, and you'd simply leave the OEM unit in place, so you won't have a hole in your dash. The aftermarket controller would use the # 3065-P wiring...
view full answer... - Will the Factory Brake Controller on a 2006 Ford F-250 Have to be Unplugged for the Prodigy P2Yes, to install the Prodigy P2 Brake Controller, # 90885, in place of your factory brake controller you will need to disconnect the plugs and use the gray 4-pin plug that matches the wiring adapter, # 3065-P, for the P2 brake controller. Keep in mind, disconnecting the factory brake controller may set a fault code on the instrument cluster. The only way to have the code removed is to take the truck to a Ford dealer and have them turn off the factory controller. I have attached a Technical...
view full answer... - Will P3 Brake Controller # 90195 Work For Triple Axle Trailer with Electric Over Hydraulic BrakesThe Tekonsha Prodigy P3 Trailer Brake Controller, # 90195, can be used for trailers with up to 4 axles and is for use with electric or electric-over-hydraulic trailer brakes so this brake controller will work for you. As long as your 2005 Ford F-350 is equipped with a 7-way you will just need the Tekonsha Plug-In Wiring Adapter, # 3065-P, to get things wired up and ready to go. Super quick and easy installation, one end of the adapter plugs into the built-in port beneath the dash and the...
view full answer... - Brake Controller Wiring Harness to Fit 2006 Forest River Lexington on Ford E-450 ChassisThe # 3065-P will fit 2005 to 2007 Ford F-250 and larger trucks but it will not fit the Ford E-Series. Your 2006 Forest River on a Ford E-450 chassis uses wiring adapter # 3035-P.
view full answer... - Additional Brake Control Wiring Adapter for Swapping Controller from 2005 Expedition to 2005 F250The F-250 uses wiring adapter # 3065-P, and the Expedition uses adapter # 3035-P. You can purchase the Prodigy P2 brake controller # 90885 and the adapters you will need separately. To see the current pricing for the wiring adapter, use the provided link. Since you are wanting to swap the controller back and forth between the two vehicles, using an additional mounting pocket, part # 7686 would be a good idea. All you will have to do is unplug the unit, unclip the controller from the...
view full answer... - Does a 2006 Ford F-350 Only Need the Install Harness 3065-P to Install Prodigy P3The P3 brake controller part # 90195 and the install harness part # 3065-P will be all that you will need to install and use the brake controller in your 2006 Ford F-350. The other harness would not be needed and would be unnecessary for the function of the P3.
view full answer... - Trailer Brake Controller and Wiring for a 2006 Ford F-450 6.0 DieselTrailer brake controller wiring harness # 3065-P is the correct harness for your 2006 Ford F-450. In your picture, it would plug into the larger one on the right. The larger square end of the harness plugs into your truck's connector and the small flat end plugs into the back of the brake controller # 90195.
view full answer...
- Aftermarket Trailer Brake Controller on 2005 Ford F-350Installing an aftermarket trailer brake controller like the excellent Tekonsha Prodigy P3 # 90195 with the custom plug-in harness # 3065-P may very well remedy all of the issues that you have been having with the IBC on your 2005 Ford F-350. Generally speaking, integrated brake controllers are known to have some issues and the P3 will absolutely be an improvement. You are correct in your question when you stated that this particular trailer brake controller is considered one of the best...
view full answer... - Brake Controller Replacement Recommendation for 2006 Ford F-350 with Integrated ControllerIt sounds like it's time for a new brake controller as what you described sounds exactly like a damaged controller. For a brake controller I would recommend the Prodigy P3 Brake Controller part # 90195. This is our best selling brake controller because of how well it works and how easy it is to setup. This is a proportional brake controller that senses the amount of braking the tow vehicle is applying and applies a proportionate amount to the trailer brakes. This will be the last brake...
view full answer... - Replacing a Ford Factory Brake Controller with Aftermarket Brake Controller on a 2005 Ford F-250The fault code will be displayed on your 2005 F-250 with factory brake controller because the powertrain control module (PCM) is looking for the factory integrated brake controller. Installing a new brake controller will not clear this fault. You will have to take the vehicle to a Ford Dealer and have the PCM flashed so that the computer no longer tries to verify the factory brake controller. This will not disable the wiring for the brake controller but will clear the fault code and keep...
view full answer... - P3 Brake Controller Shows Output Short on 2005 Ford F-350 Towing 5th Wheel TrailerI would agree it does sound like a short on the truck. The most likely culprit is a dirty or corroded trailer connector. You will want to make sure that the truck side and trailer side connectors are clean and free of corrosion inside and out. It sounds like you are using harness # 3065-P on your 2005 Ford F-350 so I doubt that it is the harness or where it plugs into the vehicle but you may want to check that connection just to make sure there is do dirt or dust in there causing this issue.
view full answer... - How to Replace Brake Controller of a 2006 Ford F-250 with Prodigy P3Replacing your factory brake controller with the P3 # 90195 would be a great option. You will need to take your truck to a dealership to have the code turned off though. I attached a help article that details this. To install a Tekonsha P3 Brake Controller part # 90195 in your 2006 Ford F-350 you will use the wiring harness # 3065-P. The harness will plug it into the factory plug after disconnecting it from the factory controller.
view full answer... - Can Tekonsha Prodigy P3 # 90195 be Used to Replace Factory Brake Controller in 2005 Ford F-250Yes, you can replace the factory installed brake controller in your 2005 Ford F-250 SD with the Tekonsha Prodigy P3 Trailer Brake Controller, # 90195, and Plug-In Wiring Adapter, # 3065-P. You will just need to unplug the factory controller and use the new wiring adapter to plug in the P3. This will set a fault code on the instrument cluster. In order to have this removed you will need to make a trip to your local Ford dealer to have the PCM (Powertrain Control Module) turned off. Once...
view full answer... - Where Does Brake Controller Plug into on 2005 Ford F-350I attached a picture of where you'll find the connector that's supposed to connect to the factory brake controller of your 2005 Ford F-350. I would recommend an aftermarket brake controller like the P3 part # 90195 with the install harness part # 3065-P over the integrated controller your truck could have came with. This controller will perform better, be more reliable, and is compatible with more styles of trailer brakes like electric over hydraulic unlike the factory controller.
view full answer...
- Recommended Trailer Brake Controller for a 2022 Ford F-150I do have an option for you but in an attempt to encourage dealer installation only, there is no trailer brake controller port under the dash anymore on a 2022 Ford F-150. The only way to currently have an in-dash brake controller installed is through the dealer. That said, we do still have options for you like the Autowbrake Electric Brake Controller part # 3430001 which installs entirely on the trailer and does not require any reprogramming on the truck. Therefore, you can set this up...
view full answer... - Where Does Brake Controller Plug In on 2008 Southwind 36D Built on Ford F-550 ChassisI attached a picture that shows where the brake controller install harness part # 3065-P plugs in on an RV like your 2008 Southwind 36D that is built on a Ford F-550 chassis. For a brake controller I would recommend the Prodigy P3 Brake Controller part # 90195. This is our best selling brake controller because of how well it works and how easy it is to setup. This is a proportional brake controller that senses the amount of braking the tow vehicle is applying and applies a proportionate...
view full answer...
- How to Remove Brake Controller Fault Codes From 2005 Ford Vehicle Computer The only way to remove the fault codes is to visit a local Ford dealer and have a Ford technician flash your PCM (Power-Train Control Module). This should "kill" the fault codes. I reviewed your order and your purchased the Tekonsha Prodigy 3, Item # 90195, and the Tekonsha Plug-In Wiring Adapter, Item # 3065-P, which are confirmed fits for your 2005 Ford so you will be good to go.
view full answer... - Can Ford Factory Brake Controller be Used With Electric Over Hydraulic Brakes on 2005 F-350?The factory brake controllers in 2005-Current Ford Super Duty trucks, such as your '05 F-350, are not designed to be used with electric over hydraulic brakes. You would need to install and aftermarket brake controller, though this will cause a fault code to appear. To have this removed you would need to go to your local Ford dealer and have them turn off your factory brake controller. Please take a look at the help article I've attached for more information. For a brake controller I highly...
view full answer... - How to Bypass Factory Brake Controller of 2006 Ford F-350The fault message is pretty vague so it's hard to give a specific area where the problem may be, but first place to check is the grounds of the trailer wiring. You also might just have a dirty trailer wiring connector that needs to be cleaned to allow the contact to be made better. We see that quite a bit. Taking sandpaper to the pins of the trailer connector usually clears that right up.
view full answer... - Wiring Harness for Installing Reese Brakeman IV Brake Controller on 2006 Ford F-350The Reese Brakeman IV is rebranded # 5504 Draw-Tite Activator IV. To install the controller in your 2006 Ford F-350, you'll need the # 3065-P harness which would plug into the pigtail coming off the controller. The other end would plug into the factory connector located behind the cubby located below the HVAC controls and the radio as shown in the linked video at the 3:50 mark. The video shows a different controller being installed, but the procedure would be the same with your Brakeman IV.
view full answer... - Brake Controller Recommendation to Replace Factory Controller of 2005 Ford F-250For a brake controller to replace the integrated controller of your 2005 Ford F-250 I recommend the Prodigy P3 Brake Controller part # 90195. This is one of our best selling brake controller because of how well it works and how easy it is to setup. This is a proportional brake controller that senses the amount of braking the tow vehicle is applying and applies a proportionate amount to the trailer brakes. This will be the last brake controller you buy as it is incredibly reliable, works,...
view full answer... - What is Needed to Replace Factory Brake Controller With Tekonsha P3 on 2005 Ford F-350In order to install an aftermarket brake controller in your 2005 Ford F-350, you will actually only need the brake controller itself and the correct wiring harness: - Tekonsha Prodigy P3 Trailer Brake Controller # 90195 - Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - Ford # 3065-P While I can't speak to functions of a Ford OEM part, the the wiring adapter for the P3 will simply plug into the same port as the factory controller. This will be all that is needed for the...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Written by:
Lindsey S
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Rachael H
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Heather A.
3/28/2018
Bill,Thank you for your review. I see that you have a 2005 Ford F-250 super duty. If your Ford came with a factory brake controller that you replaced with an aftermarket controller, then the TBC error code will display on your dash. Your local ford dealer should be able to deactivate the TBC error code.