Replacement 3-Wing, Low M6 Hand Knob for Thule Roof Mounted Carriers
(288 reviews)
Price: $9.29
In Stock
Replacement 3-Wing, Low M6 Hand Knob for Thule Roof Mounted Carriers
Item # 753-0783
Retail:$10.50
Our Price: $9.29
You Save: 12%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (288)
- Q & A (0)
- Videos (2)
- Photos
Thule Accessories and Parts - 753-0783
- Watersport Carriers
- Roof Mount Carrier Parts
- Knobs
- Thule
Used primarily with Thule roof-mounted carriers, this 3-wing knob fits over the threaded end of an M6 carriage bolt to help secure the rack to your load bars. Replacement hand knob twists on.
Features:
- Replaces 1 lost or damaged 3-wing knob for Thule roof-mounted carriers
- Watersport carriers: Thule's Stacker rooftop kayak mounting system (TH830), Thule Hang Two Surf Carriers (TH554), Thule Hydro Glide rooftop kayak saddles (TH875XT), Thule Hullavator rooftop kayak carrier system (TH897XT), Thule Hull-A-Port PRO kayak carriers (TH835PRO)
- Bike carriers: Thule Sidearm wheel-mount bike carrier (TH594XT), Thule Wheel-On roof-mounted bike-wheel carrier (TH593)
- Fits over threaded end of an M6 carriage bolt (sold separately)
- Helps to secure carrier to your roof-rack load bars
- Twists on for installation
753-0783B Replacement 3-Wing, Low M6 Hand Knob for Thule Roof Mounted Carriers
Replaces Thule 7530783
Video of Replacement 3-Wing, Low M6 Hand Knob for Thule Roof Mounted Carriers
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Thule Roof Mounted Carriers 3-Wing Low M6 Hand Knob Replacement Review
Hi everyone. It's Evangeline here at Etrailer. And today we'll be taking a look at our replacement part, which is the Thule M6 low hand knob for your Thule roof mounted carriers here at Etrailer. So this is a direct replacement knob for your Thule roof mounted carriers. And like what we have here is we have a kayak carrier, which is the Thule stacker, and you can see how we're using a knob for both the carrier itself, as well as the clamps used to clamp down the carrier. So if one of them gets lost, damaged, or is broken, this is what you would get to replace them.
This fits right onto your M6 carriage bolt, kind of like what we have right here. So if you don't have an M6 carriage bolt, this will not thread onto it and make sure that's what you're using to clamp down your roof mounted carriers. All you need to do is just pin it around the bolt. And that's pretty much all there is to installing this replacement knob. Now the thing about this wing nut is that the thread is kind of deep on the inside.
There is some space that you have to clear before it threads onto your bolt. So just to make sure that if you're using this to replace something lost, and you're not sure which bolt you need, or which replacement part you need, make sure you have enough thread on that bolt for this to fit onto. So from my experience of working with Thule roof mounted carriers is I definitely recommend picking up a couple of these as you get your accessory, just because it is really easy to lose these nuts because of once you do release them, I've dropped them several times onto our floor or on the roof of a vehicle. So just because of that, this is a great piece to have around as a replacement part for if you do lose, break or damage, your current knob that is on your roof mounted accessory. Again, this is designed for Thule roof mounted accessories.
This may or may not fit whatever other accessory you have, but as long as it has an M6 pattern on that fault, it probably will fit. And that was a look at our Thule replacement hand knob for your Thule roof mounted carriers. Again, this is the M6 low hand knob and you can find them here at Etrailer..
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
Customer Reviews
Replacement 3-Wing, Low M6 Hand Knob for Thule Roof Mounted Carriers - 753-0783
Average Customer Rating: 4.8 out of 5 stars (288 Customer Reviews)
Used primarily with Thule roof-mounted carriers, this 3-wing knob fits over the threaded end of an M6 carriage bolt to help secure the rack to your load bars. Replacement hand knob twists on.by: TR67508/13/2022
Perfect replacement parts to repair the deflector on my Thule carrier rack.
by: Jennifer09/27/2023
Website was easy to navigate and product descriptions were accurate. Shipping was quick. Good customer service.
by: Kurt 05/20/2023
Fits Thule M6 bolts used in Hull-A-Port exactly.
by: Roger07/11/2023
All work as expected. They were necessary because of rusting in the originals. Happy with my purchase
by: Levi 08/05/2023
Great product looks exactly the same as the original ones
by: Andrew K08/08/2023
Good price. Quick delivery.
by: David08/26/2022
Just what I ordered, now I can use my Thule Hula-port kayak carriers again. Perfect fit. Only if they came with a leash so I don't loose them again.
Thank you,
by: DMassietx09/30/2022
Fits perfectly on my Thule kayak rack, and arrived quickly. etrailer.com comes to the rescue again!
by: Heather 07/29/2023
They came quickly and fit perfectly!
by: Nicole 07/10/2023
Looks just like the others!
by: John H08/19/2014
This is an exact OM replacement part that was easy to find on etrailer.com. Although it is a part that needs to be replaced every few years it is hard to locate even on the Thule site. Price and shipping were good and the parts (I ordered extras) arrived as promised. I will definitely recommend this company and will return for rack or trailer parts.
John H.
8/19/2015
Perfectly
by: Alan 08/25/2022
I was amazed to easily find exactly what I needed to use my ski attachment with my bike rack! Thanks!
by: Mike 04/12/2023
Product as described, no surprises.
by: Eric 03/03/2023
Worked great to resuscitate a 10-year old rack that was rusting out.
by: Donald08/30/2022
Quick easy replacement parts for Thule racks. Wish the plastic didn’t degrade so fast.
by: Jamie O08/11/2016
I needed to replace knobs I lost on the Thule883 kayak carrier. These are exactly the same as the original knobs.
Jamie O.
8/12/2017
I would order these again if I need replacements in the future
by: Great Replacement08/18/2017
I have an old Thule bike rack and the plastic hand knobs were starting to break off of the stay bolts. The knew knobs have a threaded steel insert that hold the bolt better. I had to buy new bolts that were threaded all the way to the cap. Much stronger than the original ptoduct. I used 80 mm M6×1.0 stainless steel bolts and a little thread locker to keep the hand knob from loosening on the bolt. Thule makes M6 and M8 hand knobs, so make sure to size the one you have. The hand knobs were easy to find at etrailer with a good description and fast shipping.
by: Sherry06/02/2022
It’s great I can so easily get replacement parts for my Thule roof top saddles.
by: RJPomeroy06/25/2017
Lost a knob on my Thule kayak rack - left racks on too long without checking tightness - my bad. Hunted for replacement and some spares. Googled around a bit and landed here - useful description and good price. Knobs fit like OEM equipment (which they well may be) and have served well over the past year. All good, zero complaints. Just a remineder, if you are going to keep your rack on all summer, tighten your knobs once a week!
by: james richie10/23/2017
This is the first survey in a long time, in which I am eager to provide a review! This was such a small order for Thule parts needed for one of our kayak racks. I'm amazed that there was no minimum required. The parts came sooner than expected, and have allowed for us to have a rack system that is as good as new.
Thanks to George for caring to do superb business for insignificant amounts. This will cause us to continue with etrailer.com in the future. You have been faithful in the small things, allowing for more substantial orders to come!
by: John06/22/2022
Easy site to navigate and product was shipped as promised on time, I would highly recommend etrailer.com.
by: Ed W.08/08/2016
This is a perfect replacement part. As a matter of fact K just returned from a 1,700 mile trip with my tandem kayak attached to mu cargo rack with these wing nuts. They did not loosen one bit. Everything was as tight as the day I put it on.
I highly recommend George and etrailer
by: Famous name cartop carrier nuts03/17/2015
My order was a tiny one, just four replacement nuts for my cartop bike rack (a famous 'nordic' brand). I was pleasantly surprised at how fast the order shipped, I think I ordered on Tuesday and had a package in my mailbox by the weekend. Quality is excellent, I literally can't tell the new nuts from the original gear. And George followed up by email at several points: to tell me my order was in processing, then when it shipped, then when they got notification that it had arrived. Top notch service all the way AND the lowest price I could find online, will buy again from etrailer! Thanks, guys!
25
288
Show More Reviews
See what our Experts say about this Thule Accessories and Parts
- Replacement Knob for a Thule Hull-A-Port Kayak CarrierYes, I checked with Thule and replacement 3-wing knob, # 753-0783, does fit the Thule Hull-A-Port, # TH834.
view full answer... - Availability of Thule 3-Wing, Low M6 Hand KnobSounds like you are looking for the part # 753-0783. This knob is the Thule 3-Wing, Low M6 Hand Knob for Thule Roof Mounted Carriers that you said you are looking for.
view full answer... - What are the Dimensions of Replacement 3-Wing, Low M6 Hand Knob 753-0783I went out to the warehouse to measure Thule replacement 3-wing knob, # 753-0783. At its widest point it is 1.34 inches and from the end of one wing to the space in between the other 2 wings it is 1.10 inches. And it is 0.70 inches tall.
view full answer...
- Is the Threaded Portion of the Replacement 3-Wing Hand Knob part # 753-0783 Metal or PlasticThe threaded portion of the Replacement 3-Wing Hand Knob part # 753-0783 that you referenced is metal.
view full answer... - Replacement Knob For Hydro-Glide Assembly On Thule Glide And Set 883Since you already have the Replacement 3-Wing Hand Knob # 753-0745, it looks like you just need Replacement 3-Wing, Low M6 Hand Knob # 753-0783. This knob is used to secure the hydro-glide assembly of the Thule Glide and Set 883 to your crossbars.
view full answer... - Replacement 3-Wing Knobs for Thule Sidearm Roof Bike CarrierThule Replacement Knob part # 753-0745 is the correct knob for the Sidearm rack's ratcheting arm. It fits both versions of this rack. For the knob that secures the carrier to the roof rack crossbar use M6 part # 753-0783.
view full answer... - Replacement 3-Wing, Low M6 Hand Knob for Thule Canyon XT Roof Cargo BasketWe have exactly what you need, that is the Replacement 3-Wing, Low M6 Hand Knob for Thule Roof Mounted Carriers, # 753-0783. And FYI, in case needed in the future, we also have the Replacement Hardware Bag #2 for Thule Canyon XT Roof Cargo Basket, # 7521807001. This has multiple replacement parts in a kit.
view full answer... - What is the Thread Pattern and Size of Replacement Square Head Bolt for Thule FairingsYes, the threads on the Replacement Square Head Bolt for Thule Fairings, # 853-208909, is an M6 bolt. I pulled the bolt and another M6 item, wing nut # 753-0783, and tested them together. The bolt threaded in the nut correctly so it is an M6 bolt. I cannot guarantee that the bolt will work with anything other than a Thule product. The bolt head is about 3/4 inches square and the head is 1/8 inch thick. Overall, the length of the bolt is about 1-1/8 inches.
view full answer... - Replacement 3-Wing M6 Knob for a Thule Hull-A-Port Pro Kayak CarrierWe have the exact knob you are looking for. It is # 753-0783. This same knob is used on several Thule carriers including your Hull-A-Port Pro kayak carrier.
view full answer... - Replacement Knob for Curt C18115 Roof Mounted Cargo BasketThe Thule replacement hand knob, part # 753-0783 fits a 6 mm diameter U-bolt, so it won't work with the 3/16 inch diameter U-bolt on your Curt Roof Cargo Basket like # C18115. At present, we don't offer a replacement knob although Curt tells us there will be a replacement hardware kit available by the end of 2020. In the meantime, I'd recommend you go to your local hardware store and obtain a 3/16 inch wing nut, which will work fine for you until Curt releases the hardware kit in a month...
view full answer... - Is the Replacement 3-Wing, Low M6 Hand Knob # 753-0783 a Direct Replacement for Thule CarriersI went out to the warehouse and pulled the Replacement 3-Wing, Low M6 Hand Knob for Thule Roof Mounted Carriers # 753-0783 and compared it with the hand knobs on the Thule Hull-A-Port Kayak Carrier # TH834 and they were the same part. If the hardware that you received was just like the original hardware then this hand knob will work just like the original one would have. If you were pleased with the hand knobs that came with your equipment then you will be happy with part # 753-0783 as...
view full answer... - Will Yakima Aero Crossbar SmarT-Slot Kit Bolts # Y03098 Fit Thule M6 Wing Nut I actually went out to our warehouse to test a bolt from the Yakima Aero Crossbar SmarT-Slot Kit # Y03098 with an M6 wing nut from Thule (part # 753-0783). The Yakima bolt threaded into the nut perfectly which means it is indeed an M6 bolt. They will work just fine with a Thule M6 wing nut like what you have.
view full answer... - Thule Hullavator Model 897XT Top Cradle Assembly Replacement Part NumberI checked with Thule just now and the correct part number for a replacement top cradle assembly for your Thule Hullavator 897XT is the part # 7521771001 that you referenced so this would be exactly what you'd need. I also searched for the part number you mentioned and couldn't find anything.
view full answer... - What Are the Dimensions of Thule Replacement U-Bolt, # TH02943I went out to the warehouse and measured a Replacement U-Bolt, # TH02943. The center to center distance between each end of the u-bolt is 4 inches. It is 2 inches deep in the center. The cross bars on your Volvo XC90 would have to be smaller than those dimensions in order for these u-bolts to fit. The Car-Go cargo box is not made anymore so I cannot test this u-bolt with the knobs it used. But I can tell you that this u-bolt uses an M6 (6mm) knob like # 753-0783.
view full answer... - Wing Knob for Use with Thule Replacement U-Bolt TH02943For use with Replacement U-Bolt # TH02943 you can use M6 Wing Hand Knob # 753-0783.
view full answer... - What Thule Knob Will fit the T-Bolts of the Xadapt2The bolts of the # Xadapt2 that you mentioned are M6. For a low profile Thule M6 knob we have the part # 753-0783.
view full answer... - Replacement Wing Knob for SportRack SkyLine XL Roof Mount Cargo BoxFor an exact replacement knob for your SportRack SkyLine XL Cargo Box SR7095, you will want to use part # TH04877. I confirmed with my contact at Thule/SportRack that this is the knob that originally came with the cargo box. The # 753-0783 knob that you referenced will fit the M6 bolt that came in the SkyLine, but the knob is shorter than the # TH04877. The # 753-0783 knob is designed to fit Thule roof-mounted watersport carriers.
view full answer... - Replacement Hand Knob for etrailer J-Style Kayak CarrierI went out and tried a few knobs and found one that'll work but it's not part # 753-0783 like you were told. It's quite a bit too small Instead use part # 753-0776. It threads right on to the bolts of the etrailer kayak carrier, part # e98878.
view full answer... - Replacement Wing Nut for Staionary Roof Kayak CradlesIf you have a Thule watersport carrier like the Thule DockGlide Kayak Carrier # TH896 and you are looking for replacement wingnut for the clamp part, then the Thule M6 knob # 753-0783 is a fit. If your saddles have a larger M8 bolt then the replacement part # 753-0776 is the one for you. If you can tell me what kayak saddles you have exactly, I help you get the correct wing nuts if they're available.
view full answer... - Replacement Parts to Mount Thule Tram to Thule Spare Me 963ProSo I checked, and it is possible to get some of the parts you specified, while others are not due to them having been discontinued or not available as a spare part. The bolt from "1", the 45mm carriage bolts from "2" and the spacers from "3" are not offered. That said, here is what we can get you if you'd like: - Replacement Washer # 951081654 - Replacement 3-Wing, Low M6 Hand Knob # 753-0783
view full answer... - Replacement Top Cradle Assembly for a Thule Hull-A-VatorThe Replacement Top Assembly for the Thule Hullavator, part # 7521771001, includes the two allen wrench headed screws, but not the lower washer slide plate. To replace the washer slide plate, you'll need part # 853593802 I've attached instructions for installing the slide plate, which you'll need to correctly reinstall the Top Assembly. If you also need to replace the wing nut and bolt at this time, its available as part # 753-0783-08
view full answer...
- Knob Recommendation that Fits Carriage Bolt 915-0640-11 If you wanted a 3 wing knob that would fit the carriage bolt part # 915-0640-11 that you referenced you would actually want the part # 753-0783 which is an M6 sized knob to match the bolt. The other knob you referenced would be to big as it is a M8.
view full answer... - How To Use Yakima HullyRollers On Thule Aero CrossbarsI do have an option for you to use the Yakima HullyRollers 8004015 on a Thule WingBar Evo Crossbar like part # TH711420 but there isn't any option to mount them within the channels. The only mounting option available for the HullyRollers are wraparound clamps. The correct wraparound clamps for aero crossbars are the Universal MightyMounts for Yakima Roof Mounted Accessories part # Y03590. The Replacement 3-Wing, Low M6 Hand Knob part # 753-0783 is made of plastic and there is no metal...
view full answer... - Hardware for Fairing Clamps on Thule Canyon Rooftop BasketI checked with Thule and the hardware is available to install the Replacement Fairing Clamp for Thule Canyon Roof Baskets # 1500052562. What you need is Carriage Bolt # 915-0622-54; if you also need the 3-Wing Hand Knob that is part # 753-0783.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Written by:
Tyler C
Video Edited:
Jacob T
Installed by:
Kathleen M
Installed by:
Evangeline M
Updated by:
Wilson B
Updated by:
Matthew S
Updated by:
Manda E
Video by:
John S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Tr675
8/14/2023
Fine - no issues. When I installed the wing knobs I added a little glue glob to keep from losing them on the road again I originally lost them as a result of vibration and wind -they loosened up