Replacement Track Nut for Thule Tracker Roof Rack Fit Kit TK4
(33 reviews)
Price: $7.20
In Stock
Replacement Track Nut for Thule Tracker Roof Rack Fit Kit TK4
Item # 853-5147
Our Price: $7.20
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (33)
- Q & A (0)
- Videos (1)
- Photos
Thule Accessories and Parts - 853-5147
- Roof Rack
- Hardware
- Tower Parts
- Feet
- Nuts
- Thule
This track nut attaches to the bottom of your Thule Tracker fit kit foot and mounts in the factory roof-rack railing of your vehicle. The nut makes the foot adjustable, allowing you to customize your roof rack.
Features:
- Replaces 1 track nut for Thule Tracker roof-rack fit kit TK4
- Attaches to Tracker foot with bolt and washer (sold separately)
- Fits in your vehicle's factory roof-rack railing, allowing foot to slide along track
- Creates adjustable roof-rack system
Specs:
- Application: Thule Tracker Roof-Rack Fit Kit TK4 (THTK4)
1500056353 Replacement Track Nut for Thule Tracker Roof Rack Fit Kit TK4
Replaces 853-5147
Video of Replacement Track Nut for Thule Tracker Roof Rack Fit Kit TK4
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of Thule Roof Rack - Replacement Track Nut - 853-5147
Hello, everybody, this is Jeff at etrailer.com. Today we're taking a look at this Replacement Track Nut for the Thule Tracker Roof Rack Fit Kit, Part Number TK4. Now this will replace a one track nut on the Thule Tracker Roof Rack Fit Kit. This track nut will attach to the bottom of your Thule Tracker Fit Kit Foot, and it mounts in the factory roof rack railing of your vehicle. And it does attach to the Tracker Foot with a bolt and a washer. We do sell those items separate on our website.
They are listed on this product page as a related product. Again, this fits in your vehicle's factory roof rack railing allowing the foot to slide along the track. So it creates an adjustable roof rack system. Last thing we do is just give you some measurements on this. Width on it is right at 1 1/4" by 3/4" and it's 1/8" thick.
That should do it for the review on the replacement track nut for the Thule Tracker Roof Rack Fit Kit..
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Did not arrive in time
Customer Reviews
Replacement Track Nut for Thule Tracker Roof Rack Fit Kit TK4 - 853-5147
Average Customer Rating: 4.8 out of 5 stars (33 Customer Reviews)
This track nut attaches to the bottom of your Thule Tracker fit kit foot and mounts in the factory roof-rack railing of your vehicle. The nut makes the foot adjustable, allowing you to customize your roof rack.by: Ken05/10/2018
Used this product to mount awnings on my camper's roof rack. Worked perfect and, as always, etrailer provided outstanding customer service. Uses M6x1.0x (whatever length you need, I used 16mm).
by: Tristan N.04/12/2017
These fit perfectly in the bottom slot of the Yakima Jetstream. They are pretty much the thickest and widest nut that will fit in the slot, so they are plenty strong. The price would have been way too high if they were not such high quality. I used 4 per bar to make custom towers to hold my Jetstream crossbars to the top of a Jeep Wrangler hard top. (I made a system to interface with the Teraflex Nebo). Just get the proper length M6x1mm pitch bolts for your application.
by: Leslie 12/30/2022
I bought this so I could attach a homemade roof rack to my truck topper tracks and it fit perfectly!
by: Chris03/26/2018
After losing a track nut for a Westin Heavy Duty roof rack and not finding a replacement part anywhere, I went looking for a suitable substitute. This part is substantial enough to handle the rack's parameters and is easier to assemble than the original part. Thanks to etrailer for publishing size specs, preventing guess work for my hybrid fix. Reasonable price too.
by: Bernard 09/29/2022
Customer service at e trailer was excellent. Assisted me with determining exactly what I needed. Thanks so much.
by: Andrew B06/29/2016
Funny, I used it to hold down a Yakima Landing Pad tower on a factory ARE truck
cap roof track. It replaced a Yakima track nut where the bolt sheared off after cross threading. Works perfectly. The Thule brand track nut is actually a little bit longer and beefier. Also, at the time I could only find Yakima track nuts in a kit. Purchasing just one track nut saved beaucoup bucks.
by: Frank T.09/01/2017
My project was to create a side tie down point for a Chevy Traverse roof rack system. After much research and experimentation, I was able to use this item as the lower attach nut.
I gave this product a 4-star only because of some incorrect sizing specs on the etrailer product questions page that caused me problems after ordering. Otherwise, the product was of excellent quality. Because of the mistaken spec information, etrailer.com took care of the problem in a quick and satisfactory manner. Thank you etrailer.
by: Billy B09/27/2022
Is good. Me likey. The ladyfolk appreciate square nuts.
by: Mike01/28/2014
This product will fit the slides on the roof of most pop up campers. It provides a good secure point for mounting roof racks.
by: Mark09/18/2022
Worked well but ridiculous price.
by: Kurt 06/08/2021
High quality steel, Perfect fit for my roof rack rail.
by: James 04/19/2021
Excellent product, I couldn't be happier with etrailer! Fit is perfect.
by: Kelly 10/14/2021
Great quality part and the usual awesome service from Etrailer. Works perfect for what I needed
by: Cuong05/27/2022
Delivery fast and part was excellent.
by: Doug A04/30/2021
Thanks for sending me this part. I recommend putting such small parts in a plastic bag before putting in the mailer.
by: Jeremy 12/17/2021
clear and fast shipping
by: Linda 05/24/2021
Just the part we needed! Thanks!
by: Bruce07/14/2022
by: Jennifer 09/05/2022
by: Jason 08/05/2020
Arrived early and works exactly as I was hoping.
by: Martin09/15/2021
by: Raul 07/27/2021
Great product.fast shipping
by: Chris 07/14/2021
by: Tom 05/20/2021
by: Ronald 12/01/2020
Thank You !
25
33
Show More Reviews
See what our Experts say about this Thule Accessories and Parts
- Dimensions of Thule 853-5147 Replacement Roof Rack Track NutAccording to Thule, at one time they did the OEM roof racks for BMW/Mini, but that's been several years ago so they can't provide any information on anything more recent than 8 or so years ago. The good news is that I can simply provide you with the dimensions of the track nut, which will provide you with a good idea whether it'll work with the slots in your crossbars. The # 853-5147 nut measures 1-1/4 x 3/4 of an inch and is .159 of an inch thick. It's threaded for an M6 bolt. You...
view full answer...
- Do Track Nuts # 853-5147 and # 853-2106 Have Same Thread SizeBoth track nuts you mentioned of # 853-5147 and # 853-2106 have M6 thread size.
view full answer... - Thule Track Nut that Will Fit Channels of RetraxPro TonneauThe easiest to fit track nuts for the channels of your RetraxPro XR will be the track nuts part # 853-2106 due to the angle of the "square" so that would be what I would go with.
view full answer... - Roof Rack to Replace Crossbars of 2015 Lance 995 Factory RackSince we don't carry the brand of roof rack you have on your Lance 2015 995 the best option we have is an all new rack like the Sportrack part # SR1020 since nothing we offer will fit the bars you have. This is an economically priced option that will do a great job securing your solar panels.
view full answer... - Roof Rack Solution for Lance 1685 Travel TrailerSince travel trailers are so tall there aren't really any roof rack options made for them but you could use the Swagman Roamer LT roof rack part # S80510 although it was mostly intended for install on a pop up camper. Install would be the same on a travel trailer. It looks like you have a lot of roof accessories currently so it would be a matter of trying to place the bars in a location that wouldn't interfere with them and also would allow you to carry what you need to up there.
view full answer...
- Track Nut that Can Fit Rhino Rack Roof Rack to UltraGroove ChannelsWe have a set of track nuts that fit the Rhino Rack roof rack feet into the channels of the Ultragroove tonneau with the part # RRT-FK1. The Thule track nut you mentioned would not work.
view full answer... - What Bolt is Needed for the Replacement Track Nut for Thule Tracker Roof Rack Fit Kit TK4The correct bolt for the Replacement Track Nut for Thule Tracker Roof Rack Fit Kit TK4 # 853-5147 is the Replacement M6 x 17 mm Bolt # 924-0617-15 which is a M6 x 17 mm.
view full answer... - Longest Crossbars For Truck CamperCrossbars of that length are not available; the longest possible crossbars are the 79 inch Rhino-Rack Vortex Aero Crossbars # RRVA200B-2.
view full answer... - What is the Quantity of Track Nut Supplied in Thule Replacement Track Nut # 853-5147 for TK4 Fit KitThe Thule Replacement Track Nut Kit, part # 853-5147, consists of a single track nut. The replacement 17 millimeter bolt, part # 924-0617-15, and washer, part # 951061254, are sold separately and also as single pieces.
view full answer... - Can You Add Crossbars to Lance 810 Truck Bed CamperI do have an option for you though we don't have any confirmed fits for this exact application. The best option however would be to use the Thule ProBar Evo Crossbars part # TH713700 which are cut to fit with the Evo Feet for Thule Crossbars part # TH710401.
view full answer... - Longer Bolts to Use Thule Tracker II Feet with Track System in a Leer 180 Camper ShellHow long do the bolts need to be? The regular ones for the Tracker II set ups are M6 x 17mm, # 924-0617-15. We have a pair of M6 x 27mm bolts, # 1500052564. The other M6 options are going to be much longer.
view full answer... - Longest Roof Rack for Lance 855S Truck CamperFor your application I recommend the 79" Long Rhino-Rack Vortex Crossbars # RRVA200B-2 and then with 2 kits of the Track Mount RLTF Legs for Factory Roof Rack Tracks # RLTFMV. This is one of the longest bars we have for a setup that fits the OEM rails on your camper.
view full answer... - Track Nut Compatible with Lance Camper Roof RailsGreat question! I believe that TopLine is the OEM manufacturer for Lance's roof rails. Although there is no official industry standard size for slots on roof rails, most of them are very similar. It just makes sense to design the racks to be compatible with multiple crossbars and accessories. The Thule Track Nut, # 853-5417, that you mentioned is designed to work with Thule's M6 x 17 mm Bolt, # 924-0617-15, and washer, # 951061254. You'll also need a 4mm Hex Key like # 853-2430-02 to...
view full answer... - Parts for Thule Tracker TK1 Rail Foot PackFor your TK1 system, you will want the Replacement FootBase Thule Tracker Roof Rack # 753-2149. Depending on the rails you have, you will either want the track nut # 853-2106 or # 853-5147. Then you will want bolt # 924-0617-15 with key # 853-2430-02. The washers needed are black washer # 951061254 (2 needed per base, 8 total) and yellow washer # 951-0613-12 (2 needed per base, 8 total). The Tracker II Feet are no longer available but it sounds like you already have them so these...
view full answer...
- Recommended Roof Rack Crossbars for Lance Cab Over Camper With Factory TracksFor your Lance 855s Camper with standard tracks I recommend the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks - Qty 4 # RRRLT600 and then crossbars like the Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 65" Long - Qty 2 # RRVA165B-2. Because I don't know the specific width of your tracks, I have given other length options below that are compatible with these legs. For 59 inch long bars use # RRVA150B-2 For 54 inch bars use # RRVA137B-2 For...
view full answer...
- How Do I Mount The Rhino-Rack Quick Mount Legs On My Lance 920 Cab-over CamperIf the raised rails on your camper have a track, you will need the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks - Qty 4, part # RRRLT600. These Rhino-Rack Legs will mount to the tracks in your rails on the roof of your Lance 920 Camper. If your camper has raised rails without tracks, you will use the Rhino-Rack SX Series Legs for Vortex Aero Crossbars - Raised Factory Side Rails - Qty 4, part # RRSX008. Without knowing the width of your camper, I...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Written by:
Tyler C
Installed by:
Jeff D
Updated by:
Wilson B
Updated by:
Hannah L
Updated by:
Manda E
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Tristan
4/12/2018
After 1 yr, the nuts are still holding strong. I have put many heavy loads on the crossbars, and drove coast-to-coast with a kayak on the roof at 80 mph. The nuts are still holding tight and strong to the Jetstream crossbars.