Boost Thru-Axle Adapter for Thule TopRide or FastRide Roof Bike Racks - 20-mm x 110-mm

Video Transcript for In-Depth Review of the Boost Thru-Axle Adapter for Thule TopRide or FastRide Roof Bike Racks

If you have the Thule FastRide or the Thule TopRide and you have a Boost Thru-Axle bike, we do have an adapter you're gonna need to be able to use these racks. So what we're gonna do today is you show you how to swap it out, so it's gonna work with your bike. We're gonna have four different bolts on the bottom, you can do this when it's mounted onto your roof, or just on the table. What we wanna do is loosen these up a little bit. And once we get all four of 'em loose, we can go ahead and slide this out, and then take our Boost adapter, slide it in, and then tighten it up. And that's really all you really need to do to get it all set up for your bike.

Once we get it nice and tight, you wanna make sure it's not moving around, or anything like that, and we are ready to go. And it's just as easy to take out as it is to put in. Literally, all you gotta do is just loosen the bolts that you tightened up. Just reverse the installation process. And if you are using the TopRide, all you really gotta do is once you have it on your bike, as you can see it works with the TopRide as well.

So that is always a plus. This is gonna be for your 20x110mm Thru-Axle forks and let's just do some dimensions for ya. So. Grab this. It's a rough measurement in inches, it's about four and quarter inches long.

And we are gonna have about an inch in diameter and around that. Pretty simple product, we just have whatever you need to be able to convert these two bike racks to fit your Boost Thru-Axle bike. And again, this was the Thule Boost Thru-Axle 20x110mm adapter..