Replacement Master Cylinder Assembly for Titan Model 60 and Aero 7500 Brake Actuators - Drum
(139 reviews)
Price: $126.43
In Stock
Replacement Master Cylinder Assembly for Titan Model 60 and Aero 7500 Brake Actuators - Drum
Item # T4395100
Retail:$143.26
Our Price: $126.43
You Save: $16.83
This item qualifies for Free Shipping
In Stock
- All Info
- Reviews (139)
- Q & A (65)
- Videos (1)
- Photos
- Why etrailer?
Titan Accessories and Parts - T4395100
- Brake Actuator
- Master Cylinder Parts
- Master Cylinder
- Titan
- Drum Brakes
This replacement assembly fits Titan Model 60, Dico Model 60, and Aero 7500 trailer brake actuators for drum brakes. Includes master cylinder, filler cap, orifice fitting, and hardware.
Features:
- Works with Titan Model 60, Dico Model 60, and Aero 7500 brake actuators
- Drum brake models only
- Includes:
- Master cylinder
- Gasket
- Orifice connector: 1/64"
- Hex bolt: 3/4" long x 1/4" diameter
- Mounting dimensions: 1-/8" wide x 3-5/8" tall
- Lock washer: 1/4" diameter
- Diaphragm-style filler cap
- Master cylinder cover
4395100 Titan Model 60 Master Cylinder Kit - Drum
Video of Replacement Master Cylinder Assembly for Titan Model 60 and Aero 7500 Brake Actuators - Drum
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Titan Brake Actuator T4395100 Review
Today we're going to be taking a look at part number T4395100. This is the replacement master cylinder assembly. This replacement assembly is going to fit Titan model 60 and Aero 7500 trailer brake actuators. It's designed for drum brakes only. You can see here everything that it's going to come with. We're going to go over just the components.
It's going to come with a master cylinder. Nice, heavy duty design. It's got the rubberized boot here on the end of it. If we remove that boot on the inside you're going to be able to see that it does come with the snap ring, the spring, and the seals. All of that is going to already be in place and again, located behind the boot.
It's also going to come with your gasket. It's going to be this right here, it's going to come with the master cylinder cover. You're going to get the orifice connector, goes into the threaded portion here at the back of your brake line. It's going to come with the hardware. You're going to get your four hex bolts. Those are going to measure 3/4 of an inch long by 1/4 inch in diameter, and you're going to get your 1/4 inch lock washers.
Has the diaphragm style filler cap, and just a quick tech tip, one of the ways to tell if the master cylinder is designed for disc or drum brakes is to simply take a paper clip and you can straighten it out. If we push it into this area back here, if it only goes in about an inch and a half that means that it's designed for drum brakes only. If the paper clip was to go in about three inches, then that means that it would be designed for disc brakes. That's going to do it for our review of part number T4395100. This is the replacement master cylinder assembly from Titan.
.
Customer Reviews
Replacement Master Cylinder Assembly for Titan Model 60 and Aero 7500 Brake Actuators - Drum - T4395100
Average Customer Rating: 4.9 out of 5 stars (139 Customer Reviews)
This replacement assembly fits Titan Model 60, Dico Model 60, and Aero 7500 trailer brake actuators for drum brakes. Includes master cylinder, filler cap, orifice fitting, and hardware.
- T4395100
Garrett T - 03/19/2021
by: Garrett T.03/18/2020
Good product at a good price. Got it installed and the system bled (the old brake fluid looked like thin mud coming out!) and everything works well. Install was easy, with the exception that the old master cylinder that I removed looks to have been just a hair shorter than this one that I got from etrailer. The new one was a tiny bit too tall for it to slide in the back of the actuator. I ended up removing the actuator from the tongue of the trailer to get the master cylinder bolted onto it. With the four master cylinder bolts torqued down it fit fine and the actuator easily went back into place on the tongue. I do wish it had a metal cap like the old one that it replaced, but that is not a huge deal. I hope the plastic one holds up.
Comments
The plastic master cylinder cap seems to leak. Other than that, its fine.
Garrett T - 03/19/2021
- T4395100
by: Dylan07/31/2021
product works as promised. it appears to be a direct replacement but is very tight getting put back under original mounting bracket. My bracket is welded in place. It may be because of the new gasket (is thicker). I used a hammer and punch to bend the metal down a little on the trailer itself so the new master cylinder could slide into place. No other problems.
- T4395100
Mark M - 09/05/2021
by: Mark09/03/2020
This is the direct replacement for my Titan hitch. It appears to have an anodized exterior coating that should resist rust.
Comments
Perfect!
Mark M - 09/05/2021
- T4395100
Calvin A - 06/07/2021
by: Calvin06/06/2020
I needed this part to replace a rusted and blocked cylinder on a boat trailer. The part was delivered earlier than I expected and was exactly what I needed. The price was right and the service was superb.
Comments
Made the trailer connection like new. Have had zero problems with the brake assembly
Calvin A - 06/07/2021
- T4395100
by: Paul07/16/2021
This master cylinder was a direct replacement for the one in My Escort Boat trailer. It came complete as advertised and I had it in just a couple of days. Could not be happier with the product and service.
- T4395100
by: Jeffrey02/08/2019
Perfect fit and best price out there. Was delivered faster then my prime membership would have. Easy install and (thanks to etrailer) have a whole new braking system under my Outlaw. Thanks Steven & etrailer for listening and your expert follow up!!
- T4395100
by: Kent08/14/2021
Product worked well as it was supposed to. No problems thus far. Hope it continues to serve us well.
- T4395100
by: Biyue07/22/2021
Haven't test drive but Quality looks good. Delivery 2 days earlier than quoted, this is very good!
- T4395100
by: Jw05/20/2021
Looks good. The one it’s replacing so rusted out it looked like a’70’’s Chevy
- T4395100
by: Tino Pastrana08/11/2014
I ordered the brake actuator replacement for the Titan Model 60, paid extra for the UPS ground shipping and had the part in 6 days! You must take apart the brake actuator from the hitch as not to damage the gasket when installing the part. Had it installed in 15 minutes. Another 15 to bleed the drum brakes and all is well. LGB (lets go boating) See pics
- T4395100
Uwe S - 04/14/2021
by: Uwe Schmidt04/13/2020
part is of good quality perfect fit and a very good value
Comments
Perfect its good Qualityand it was an excellent Price also you managed the shipping cost well while others that I checked for the same Part were more expensive and quoted much higher shipping costs
Uwe S - 04/14/2021
- T4395100
by: joseph04/08/2017
I purchased master cylinder for a Titan model 60 and was easy to purchase from etrailer and i received it in the amount of time that was on the order. everything that was needed was included to change the part. I rate etrailer excellent because the order was easy and i received the part with no problems. The master cylinder was the exact part as the original
- T4395100
by: skdoo80008/05/2015
A bit bigger than the Dico it replaced (exact manufacturer and part number, go figure). Had to give the tongue some encouragement to get the new part to fit (certainly not etrailer's fault). Would have liked torque specs for cover. etrailer was fantastic. Will definitely use again. Ordered on a Saturday, received ship notification on Sunday and part delivered on Tuesday. Unheard of - thanks George!
- T4395100
Brad - 08/23/2019
by: Brad08/23/2018
This was exactly as described in the subscription. It was simple to remove the old and add in this new one. I was surprised by the quick shipping as well.
Comments
Still working as expected after a year.
Brad - 08/23/2019
- T4395100
Bill R - 12/31/2017
by: Bill Rebman12/31/2016
The trailer master cyinder is in place and working fine. Fitment as important as ever was correct.
Comments
The surge brake cylinder is working well
Bill R - 12/31/2017
- T4395100
by: Pops K06/16/2016
First of all Ashley was an excellent representative for your company. After I ordered my part and submitted everything i noticed I clicked on wrong part number. I called and talked to Ashley and she quickly straightened it out for me. Now the parts were excellent also. they bolted right together on my 26 year old trailer. One small negative was the cap was made of plastic and threads crossed easily. I tried to use my old cap but it was a different thread also. So I just had to make the plastic one work.
- T4395100
by: Mike T08/02/2016
I gave this product 5 stars because of the quality . The only problem I had was that the lid would not fit the opening on my trailer and I had to reuse my old lid. Again this part is for a different trailer and so no fault of the part or etrailer. I am completely satisfied with the part and the customer service I received prior to ordering. I feel that etrailer support team went above and beyond in an attempt to help me find much needed parts. Many thanks, Mike
- T4395100
by: Nick07/29/2019
Excellent product for the money! Parts and pieces were exactly as described and the quality of everything was exceptional through the installation process. Let's hope that continues through the use and life of the product. Shipping times and customer service were also top notch! Thanks etrailer!
- T4395100
by: Garry05/30/2021
I ordered on memorial day weekend with less than 18 hours of express shipping they had it there the next day you’ve gained a customer forever
- T4395100
by: Jim10/12/2017
I have always had good service when purchasing from etrailer.com. Shipping is always a concern and I have received my orders sooner than expected and at a fair price. etrailer.com is the first place I go when looking for parts for my 5 trailers. Thank you, Jim
- T4395100
by: Robert05/25/2018
Product was an exact fit and quality looks great. I will not be using it until I get brake lines and replace the wheel cylinders
- T4395100
by: Paul05/14/2021
Perfect fit
- T4395100
by: Richard09/24/2019
both the replacement wheel cylinders and the brake actuator fit perfectly and function very well, just like new.
- T4395100
Todd T - 10/21/2015
by: Todd T.10/21/2014
Love the part . Worked great . As long as I have a trailer I will use you guys.
Comments
Great
Todd T - 10/21/201525
139
Show More Reviews
Ask the Experts about this Titan Accessories and Parts
- Replacement Parts for Discontinued Titan Aero 6000 Brake Actuator On 2004 MasterCraft Boat TrailerFor your Titan Aero 6000 brake actuator, you will need the Replacement Master Cylinder Assembly for Titan Model 60 and Aero 7500 Brake Actuators - Drum # T4395100. The 7500 and 6000 use the same parts for the master cylinder. It sounds like you also need the Replacement Damper for Titan Aero 6000 and 7500 Actuators # T4502000.
view full answer... - Replacement Parts for Dico Aero 6000 Disc Brake Actuator on Four Winns Boat TrailerWe do have some parts for the Dico Aero 6000 actuator on your Four Winns boat trailer: Replacement Master Cylinder - # T4395100 (you have to remove the check valve) Replacement Damper - # T4502000 Replacement Lock Spring - # T4501400 Replacement Bolt - # T4811500 With that being said, I'm pretty sure that you would need more parts as well (as I don't know everything you are trying to replace) so since that is the case your best option is to go ahead and replace your actuator. For...
view full answer... - Titan Brake Actuator Replacement for Titan Model 60 60ZX7000 For your Titan Model 60 disc brake actuator the correct master cylinder is the part # T4820000.
view full answer... - Replacement Master Cylinder For Titan Model 60 W/ 23361 Master CylinderYou are correct that the Replacement Master Cylinder Assembly for Titan Model 60 and Aero 7500 Brake Actuators - Drum # T4395100 you were looking at is the replacement master cylinder for your older 23361. I included a video of the Titan # T4395100 for you to take a look at.
view full answer... - Replacement Master Cylinder for DICO 189The DICO 189 you referenced is the older version of the Titan 60. You will want to replace the master cylinder with the Replacement Master Cylinder Assembly for Titan Model 60 and Aero 7500 Brake Actuators - Drum # T4395100. I've attached a video to assist.
view full answer...![Image 1 for]()
![Image 2 for]()
- Master Cylinder Assembly for Titan Model 60 Brake ActuatorI can tell you for sure that the correct replacement master cylinder assembly for a Model 60 (either Titan or Dico) brake actuator hitch is the Replacement Master Cylinder Assembly for Titan Model 60 and Aero 7500 Brake Actuators - Drum # T4395100. I researched and was unable to find a reference to a Dico 189 cylinder, but if you have a Model 60, you've found the right master cylinder. It sounds like you indeed will have to re-drill the bolt holes to install this replacement.
view full answer... - Can 1600 PSI Pressure from Actuator be Used with Drum Brake Assemblies Brake actuators designed for drum brakes typically produce around 1,000 psi pressure at most, while disc brake actuators will produce closer to the 1,600-psi pressure that you mentioned in your question. I do not recommend using a disc brake actuator for drum brakes, as the higher pressure could blow out the wheel cylinders of a drum brake assembly. If you already have an actuator, you may be able to install a pressure reducer valve to drop the pressure down to what is needed for the...
view full answer... - Dimensions of Titan Replacement Master Cylinder Assembly T4395100The Titan Replacement Master Cylinder Assembly # T4395100 is a direct replacement for Model 60 and Aero 7500 drum brake actuators. I measured this item and put the dimensions on the included photo. Overall assembled height including the filler cap is 3-1/2-inches. End to end length including the rubber boot is right at 7-inches. Width is approximately 2-1/4-inches.
view full answer...![Image 1 for]()
- Replacement Master Cylinder for Titan 60ZX7000 Drum Brake ActuatorThe Titan 60ZX7000 brake actuator is a Model 60 actuator, and you do have the correct part for a replacement master cylinder: - Replacement Master Cylinder Assembly for Titan Model 60 and Aero 7500 Brake Actuators - Drum # T4395100 So this will work with your Titan 60ZX7000; I've added a link to a video review as well.
view full answer... - Replacement Master Cylinder for Older Model Titan Model 60 Brake ActuatorI spoke with my technical contact at Titan and showed him the photo that you sent in of your actuator. My contact confirmed that you actuator is a Model 60. The right replacement master cylinder for you will depend on what kind of brakes the actuator is designed for. If the brakes have never been changed out, you can determine this by checking if the trailer has disc or drum brakes. If your actuator is designed for drum brakes, you will want the Replacement Master Cylinder Assembly...
view full answer...![Image 1 for]()
- What is Needed to Find the Right Replacement Master Cylinder on a Boat TrailerReplacement master cylinders are specific to the manufacturer and model of the actuating coupler on the trailer. I would need to know the make and model of the actuator to determine if we have a replacement available. This information could be stamped into the actuator usually on the top. It is also possible that there is information stamped into the actual master cylinder you have now. For example, master cylinder # T4395100 is designed for Titan Model 60 and Aero 7500 actuators. You...
view full answer... - Aero 6000 Master Cylinder Replacement for Use with Disc BrakesThe Replacement Master Cylinder Assembly # T4395100 that you referenced is only designed to work with drum brakes. For an Aero 6000 master cylinder kit the part # T4714200042 will work with disc brakes but you would need to reuse the other parts.
view full answer... - Best Option for Replacing 85841 Master Cylinder on Atwood Drum Brake ActuatorThe Replacement Master Cylinder Assembly # T4395100 will not work to replace your Atwood master cylinder model 85841. Since replacement parts for your actuator are obsolete, your only option is to replace the entire actuator assembly. The Demco Hydraulic Brake Actuator # 8605001 is the closest one we have to replace your Atwood 6K actuator. You can install part # T4748800 to add an electric lockout, which would be an upgrade from the manual lockout on your Atwood.
view full answer... - Do You Need To Bleed the Dico Replacement Master Cylinder # 23361 Before Installing on the TrailerIt is not required to bench bleed the Replacement Master Cylinder, part # T4395100, before installing on the trailer. You can do it if you want to, it will not harm anything, but it is not recommended. I would recommend to just install the master cylinder to your brake actuator and then bleed the whole brake system. I am including a link to a video that will show you how to bleed your trailer brakes.
view full answer... - Replacement Surge Coupler for Roadrunner Boat TrailerUnfortunately some years back Atwood was bought out and replacement parts have been discontinued so we cannot help you with a replacement master cylinder number 85739, but we can help you with a new surge coupler to replace yours. I linked our main page for surge couplers and we have both disc and drum types; these operate at different pressures so be sure to choose the right type for your braking system. First click on the type you need and then select the specific attributes you want...
view full answer... - Replacement Master Cylinder and Push Rod for Titan Model 60 Brake ActuatorsThe replacement master cylinder kit for the Titan model 60 drum brake actuator is # T4395100. It comes with a new gasket, lid, cap, mounting hardware and fitting. I have linked a video review for you. The push rod, which is the part that pushes the fluid through, is not included. If you also need the push rod then you will need # T2346300.
view full answer... - Troubleshooting Hydraulic Trailer Brakes Not Working Properly Even When Lines are Free of AirThe most likely place for brake fluid to be leaking out of your hydraulic brake system is at the fittings or master cylinder. To check the fittings, chock the trailer wheels and back up the trailer so that the brakes engage. With the actuator engaged and pushing brake fluid through to the brakes, check to see if fluid is leaking out at any of the fittings. If you find any leaks at the fittings you will want to replace the fitting. If you find that none of the fittings are leaking, it...
view full answer... - Replacement Master Cylinder or Replacement Brake Actuating Coupler for 1993 Jayco Popup TrailerYour 1993 Jayco Popup camper had an Atwood surge brake coupler and that company has been bought out and the part has been recently discontinued. To replace the master cylinder with the Titan # T4395100 will require some modification of your coupler, but may work if you are really mechanically saavy. My recommendation because your trailer coupler has been discontinued (and there won't be direct replacement parts available any longer) is to trade out the entire actuator with part #...
view full answer... - Available Replacement Parts for Tie Down Engineering LP7000 ActuatorI may have a solution for you, but we don't offer replacement parts for your TieDown Engineering LP7000 actuator and I do know that they are becoming more difficult to come by in a lot of situations. However, we do have some replacement options available that would allow you to replace your old actuator with a comparable new unit. Like the 70LP, these actuators are a fit for a 2" hitch ball, but they just have a slightly larger capacity at 7,500 lbs; you'll want to choose the correct actuator...
view full answer... - When Installing Titan Master Cylinder # T4395100 Does Cover Plate Face Up or DownMy technical contact at Titan confirmed that the silver cover plate needs to have the side with the raised rim facing down into the cylinder. After you insert the fill cap into the cover plate, the fill cap should sit flush on the smooth (non-raised) side. I have attached a brief video describing the assembly of the cylinder.
view full answer...![]()
- Recommended Surge Brake Actuator To Replace Discontinued Atwood 61101 On 2004 EZ Loader Boat TrailerI have a complete replacement surge brake actuator option for you, but unfortunately since Atwood has been out of business for quite some time there is not a replacement master cylinder available for the Atwood 61101 actuator on your 2004 EZ Loader Boat Trailer. Instead I recommend replacing it with the Dexter DX7.5 # 099-175-20 if your trailer has Disc brakes, or the # 099-175-00 if your trailer has Drum brakes. Both of these options bolt on to standard 3" wide tongues and have mounting...
view full answer... - Ranger Boat Trailer Disc Brake Actuator Availability to Replace an A-60We don't carry the A-60 actuators, but we do carry actuators that are confirmed to work on disc brakes. To see all of them check out the link I attached to the right. You will want to select the weight capacity and ball size you need from the filters on the left to see what would be recommended.
view full answer... - Replacement Master Cylinder for Titan AERO 6000 ActuatorFor your Titan Aero 6000 the correct replacement master cylinder is the part # T4395100 that you referenced and it comes with the piston inside of it as well.
view full answer... - Replacement Titan Model 60 Master Cylinder We do have replacement master cylinder assemblies available for your Titan Model 60 Actuator. If your trailer has hydraulic drum brakes, you will use the Replacement Master Cylinder # T4395100. If the trailer has disc brakes installed, you will use the Replacement Master Cylinder # T4820000. Both kits include the master cylinder, gasket, orifice connector, hex bolt, lock washer, filler cap, and master cylinder cover.
view full answer... - Recommendation for Rebuilding a Trailer Braking System on a Boat TrailerFirst, lets start with master cylinder replacement. The recommendation you got for replacing the complete actuator, is most likely a good idea because there is a reason for the crud and such that you are finding in the master cylinder and replacing the master cylinder itself is a pretty involved undertaking. We have a video showing a master cylinder replacement that should be helpful, if you decide to go this route. Other reasons for replacing the whole actuator would be that you will have...
view full answer...![]()
- Converting Trailer Hydraulic Drum Brakes to Disc Brakes with a Titan Model 60 ActuatorYou will need to replace the master cylinder on your Titan Model 60 actuator to use it with disc brakes. Drum brake master cylinders have a check valve on the inside to limit the psi. Disc brake master cylinders do not have this check valve because disc brakes require more pressure. You will need master cylinder # T4820000 for your model 60 actuator. You do not have to put brakes on both axles if you don't want to. You can always add some later if you want even better braking. I have...
view full answer... - Brakes Locking Up On Tandem Boat Trailer With Hydraulic Drum BrakesI would love to sell you a complete system but I think that it may be simpler to take care of the problem. Since you said you have taken the brakes apart and find no issues, the problem may be in the actuator. The master cylinder could be the problem, causing it to send too much fluid to the system. The replacement master cylinder assembly for Titan Model 60 Actuator is part # T4395100. This kit includes the master cylinder, filler cap, orifice fitting and hardware needed. If you find...
view full answer... - Replacement Master Cylinder for Dico Model 60 Actuator for Drum BrakesIf your Dico Model 60 Drum Brake Actuator is having difficulty pushing brake fluid, it very well may need a new master cylinder. Before replacing this part, though, I recommend checking to make sure there is not a clog somewhere on your brake lines. Try cleaning the brake line and if you are still having the same issue then I recommend replacing the master cylinder. For a replacement master cylinder on your Dico Model 60 Actuator for drum brakes, you will need part # T4395100. This...
view full answer... - Replacement Master Cylinder Kit for Dico Model 60 Coupler/Actuator and 10" Dexter Drum AssembliesWe had a customer install the Titan Model 60 master cylinder kit part # T4395100 on their Dico model 60 and although the bore was a little bigger they were able to make it fit. Then for Dexter 10 inch brake assemblies we have the part # 23-312-313 for a pair of left and right hand assemblies.
view full answer...
Do you have a question about this Accessories and Part?
Why etrailer.com?
At etrailer.com we guarantee:Highest quality accessories and parts for the best price.
Our Lowest Price Pledge ensures you will never overpay for the parts you need.Real product know-how.
We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.Most detailed, accurate accessories and part information available.
Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.Installations, made easy.
We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.Fast shipping.
Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.Personalized service for life.
We provide one-on-one, personalized service from the ordering process through the life of your product.Trusted since 1946.
We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.Returns Policy
Need to return an item? No problem. Please read our Returns Policy for more information.
Info for this part was:
Written by:
Lindsey S
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Lori W
Expert Research:
Jeffrey L
Updated by:
Laura H
Updated by:
Hannah L
Installed by:
Cole B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 800-298-1624
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.