TorkLift Camper Packer Camper Stand Kit with Lumber

Finally something rugged. The other products I've seen may be OK with a light camper, but I've got a fiberglass Bigfoot. This is the only sawhorse I'd use!1560655

Poor quality control!! Items sent were missing a board and one was too short. Have to take valuable time to go 40 minutes to store to purchase correct items!!! I would appreciate some refund.1443049

Jenny N.

10/24/2022

It is disappointing that it is missing a board along with an incorrectly sized board. I will have customer service reach out to you.

by: Patrick07/17/2021

Put about 90% of the weight on these. They handle it and 100% of the weight fine. Pricey, but took the advice of people who know wood. Definitely the right stuff, well made.1097026

Pat

7/18/2022

Horses worked very well thru the winter. In combination with the jacks unit is stable for the winter rest.

Only 1 piece missing, minimal. Everything arrived without damage, even wood. Thought wood would be predrilled for that price. I was wrong. Still holding up truck camper without breaking, a large Lance 1172!! Trying to save my legs when I need them while camping, not in storage. 824637

by: Carol T03/25/2017

Quality product. Great customer service. Fast shipping. I have a Lance 1172 sitting on these camper packer. Dry weight is about 4300 pounds. Stands up to what we put on them. Would recommend sel!er. 358611

I have ordered from trailer multiple times and have worked with the customer service line to solve problems, they have always been knowledgeable and helpful.
Great company!703561

by: MikeN08/27/2022

These have been under my Lance 2004 1161 or stored outside in the weather for a year. These show little wear and are working as advertised. No issues holding the ~3500 lb dry weight of the 1161.1379763

They worked out great. 1444251

Brackets are nice but as stated before don’t buy the lumber. They sent me two split pieces of wood. Definitely way over priced For the wood! 574748

Heather A.

10/16/2018

TorkLift Camper Packer Camper Stand Kit without the lumber is part # TLA7010.

Helpful Links

Accessories-and-Parts/TorkLift/TLA7010.html

by: James06/08/2022

Worked as it should 1310178

Thank you very much
579300

1644534

1662268

1544676

1012019

1103406

1428568

1228426

Took about an hour to put everything together. Everything is working as it should. But like another has commented. Torklift really puts zero effort into their instruction manuals. I have both The tiedowns and the camper packer from torklift and both have really poor manuals. Granted it’s fairly simple. But still. Could do with some improvements. Other than that it’s worked for 24hrs as of now.1595771

Click to Enlarge

Product quality is excellent. Assembly instructions are not written well and the diagram and pictures are almost worthless. They should also add a note saying the legs do not need to be 30" long, but to adjust the length for your individual application. I took 10" off each leg so the first step of my camper is 8" off the ground vice 18".1362316

The brackets internal measurements for the a-frame (vertical) pieces are 5.78"x1.66", this makes for a very loose fit with 2x6 lumber because the actual dimensions of a 2x6 are 1.5x5.5. The camper is not stable side to side because of this loose fit. Using snug fit lumber might not even make it stable either. In the photos in the item description it looks like the lumber is snug. If they use special sized lumber for these brackets they need to make it very clear in the instructions and item description regarding the actual dimensions. I used 2x6 Con Com Redwood S4S Untreated Dimensional Lumber sealed with Thompsons water seal (shown in the video). I wish I had bought the McCoy tools sawhorse brackets instead they would have much better side to side stability and they are cheaper too, unfortunately they are not available right now. I am going to try installing a cross piece between the two a-frames to give it more stability.1548087

With the addition of $27 worth of treated 2"x 6" lumber, my camper is very stable in storage. Torklift makes high quality stuff. Take the time to make the 22 degree cuts at the bottom of the vertical 2x6s, that way they fit really nicely into the feet. 592180

Click to Enlarge

Solid stand and worth the money for the peace of mind it provides. I used PT wood so fitting the pieces was a bit more difficult since the PT lumber was swollen with the PT chemical. Still, it went together. All of the parts except for a lock washer were present. The bag that the nuts, bolts, washers, chains, etc. come in was ripped and the parts were spilled out in the box. The parts should still be bagged, but the bag needs to be put in a small box so it stays intact during shipping.1116101

Somewhat bulky for transport, but worth every bit of inconvenience for the peace of mind they provide! Really stabilizes our 11.6 Lance camper, even on gravel, like here on a gravel bar next to the Columbia River Oregon1445288

by: Bill10/31/2016

My family has been buying tork- lift parts for over 30 years my first purchase was frame mounted camper tie downs back in 1987 the camper stands i purchased are excellent holds my 11foot camper all winter with no problems 312533