To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Replaces the front header seal or tailgate rear header seal on your TruXedo Lo Pro soft roll-up tonneau cover. Seals gap between header and truck. 5-1/2-foot Length.
Features:
Specs:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everybody, Andy here with etrailer.com. And today, we're gonna take a quick look at this Truxedo replacement header seal. This is going to replace the header seal on your Truxedo Lo Pro soft roll-up tonneau cover. And it's going to seal the gap between the header and truck bullhead or the tailgate. And this has a total length of 5.5 feet long. And then looking at the overall width, as you can see there, we're sitting right at an inch and a half.
And this seal is directly from Truxedo, so you can trust that it's going to fit right in place of the original. You're not gonna have to worry about compatibility issues or fitment issues or anything like that. Instructions are included to walk you through the installation process. So if you are needing to replace the front header seal or tailgate, rear header seal on your Lo Pro soft roll- up tonneau cover, this is going to be exactly what you need. Well, that's gonna conclude our brief look today.
I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining.
Average Customer Rating: 4.8 out of 5 stars (135 Customer Reviews)
Replaces the front header seal or tailgate rear header seal on your TruXedo Lo Pro soft roll-up tonneau cover. Seals gap between header and truck. 5-1/2-foot Length.The item was what I was expecting and fits perfectly (cutting to size is necessary and item plenty long to do it right). Was surprised how well it was packaged in heavy plastic bagging. I am quite satisfied with this purchase.
This seal is a great replacement for my torn rear (tailgate) header seal on my Truxedo Lo Pro QT. I simply had to trim a bit off one end to match the exact length of my old one. This part was very easy to change and fits perfectly. Thank you!
Needed a replacement Truxedo tonneau cover for my 2007 F-150. Contacted etrailer to find a replacement cover and the outstanding customer service by Diana H and Heather H provided me the information I needed to order the correct replacement parts, I Had the parts in three days and the instruction sheet and available videos by etrailer with directions on how to install the new tonneau cover and seals made the replacement cover easy to install and the cover is a perfect fit!
Chris
11/23/2020
The tonneau cover still looks and fits like new!
Absolutely great service, customer support, and quick shipping. Customer service like it used to be...great experience! This order was just for the header seal but I also ordered a replacement cover in a separate order. Same great experience. Derek in Customer Support contacted Truxedo to see if I ordered the right cover, and stayed with it until the order was shipped.
Guy
3/22/2022
After one year, everything is great. Absolutely pleased with etrailer. 5 stars!
This seal was easy to replace and worked and is still working well.
this is great I couldn't find this anywhere else then here. It came in Long so I had to cut it to the correct dimensions. My truck bed content will finally have more protection against rain and snow.
seal I ordered is the right length and installed fine, but is about a 1/4 inch to narrow, does not touch tailgate like the original one, not providing a seal
Excellent replacement. As other reviewers have said you do need to cut it but what I did was match it up to the header seal I was replacing by placing on one end and cutting the other end off. Couldn’t be happier. Fits just like the original. Thanks etrailer!
I ordered a replacement truxedo tarp and also a replacement seal. They checked the datecode from my original tarp and corrected my order. Everything fitted fine. Conversations over chat were also heloful.
Prompt service and perfect fit.
Wry satisfied with the purchase.
Steve J.
1/17/2024
After a year in harsh service the parts are proving durable and performing as expected.
Order came quickly
Replaced the stock one that was a little shredded from previous owner. This new one fit perfect and is holding up great after 1st year
The seal strip on the back of the Truxedo bed cover started going bad -- disintegrating -- several years ago. Tried fixing it with black electrical tape thinking that a replacement would cost a fortune. The replacement strip was about $15 with shipping and was easy to install following the simple instructions.
Timothy S.
9/4/2020
Still working great!
Very happy with the products and service received. The products were as advertised and came on time as promised. They were the correct replacement and fit for my TruXedo Lo Pro QT hardware weather stripping and header seal. Header seal for the front and rear fit perfectly with only a slight bit of trimming. Sorry, don't have any photos to share, but it looks great.
James
3/27/2022
I am still very happy with my TruXedo Lo Pro QT hardware weather stripping and header seal. Header seal for the front and rear fit perfectly with only a slight bit of trimming. After a year it performs and looks like new.
Bought the rubber strip for my toneau cover. Product arrived quickly, was easy to install. I will eventually need other replacement parts such as the latch. Will not definitely make my purchase from etrailer. Thanks guys, you're great.
Cliff E.
6/6/2018
Absolutely no problem
Exactly as described , worked great !
Slid in place with no problems.
Great easy replacement to updated and make my tonneau cover good again. Not sure what caused the problem to begin with but the previous seal began to melt and fall apart. After a year with the replacement it still looks brand new and continues to make a good seal. I would recommend this as a direct replacement if yours is bad, it is not an upgrade, just a like for like replacement.
I just purchased a f150 that already had a truxedo low pro tonneau cover installed but was missing the rear header seal by the tailgate.I ordered a new one from etrailer and received it in a timely manner and pricing was very low compared to other websites. Install was just as fast and easy although I did have to trim about 3 inches off one end to make it fit. Now the inside of my truck bed is waterproof again.
Product came right away. Fit exactly as old one. Came with instructions easy to follow. If you have a Truxedo cover it is worth the extra money to buy the the extra latch to lock it down. The cover is more stable and the rear bar latches down the cover its self more evenly. I also got the header seal cut to match old one install time three minutes. Other complained they had to cut off a little but saving of $20.00 and one minute was worth the time. Last of of all the latch material was much better then the original. Would recommend the product.
The Header Seal for the Truxedo Lo Pro QT tonneau cover installed within a matter of minutes. Simply pull off an end cap, pull out the old seal, and slide in the new.
Thanks eTrailer!
Good fit. Good quality product. Good value. Needed to replace due to velcro not holding well after 12 years of moderate to light moderate use.
Original part sent was wrong. Thru working with eTrailer representative by providing part numbers on product etc., the supplier sent eTrailer the wrong part. eTrailer was good thru the whole process to resolve and I was not in a rush situation.
I received my package from etrailer, and was very very satisfied with the quick service. I live in a part of the country that the only way to purchase items is online. It is 75 miles to the nearest city. The item fit perfectly and I installed it the same day.
Thank you for your fast and expert service.
Great weatherstrip , easy to apply
John Y.
11/3/2015
no problem
Bought to replace the seal at the front of the bed. Again, very easy to take off the old one and put on the new one. Don't understand why they can't make to size which forces you to cut to size. I'm sure it's because they want to be able to use same piece for multiple sizes along with making it work for the front seal and the tailgate seal. That was the only negative.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Ronb
8/26/2024
After a year it is as good as it began - holding up well.