Replacement Ball Sensor for Tuson Towable Tire Pressure Monitoring System - Qty 1

Video Transcript for Review of Tuson RV Brakes TPMS Sensor - Replacement Ball Sensor - TUS47FR

Hello everybody, this is Jeff at etrailer.com. Today we're gonna take a look at this replacement ball sensor for the Tuson Towable Tire Pressure Monitoring Systems. This is for a quantity of one sensor. Now this will replace an internal ball sensor on your Tuson Towable Tire Pressure Monitoring Systems. It does work with the two systems that we sell. We sell those separately.

It's part number TUS 37 FR and TUS 97 FR. Again, both of those we sell separately. This is for a quantity of one sensor. It is a motion activated ball sensor. It'll freely bounce inside the tire to prevent damage or theft.

And in each sensor, if you look closely, has an ID on it that can be keyed in to pair each sensor to the receiver. The interchangeable wheel order means there's no need to have to move the sensors after a tire rotation, and these sensors will have a longer life expectancy than your external cap sensors. These will last about 5 to 10 years, depending on use. Now this sensor is designed to be used on trailers, Class A or Class C motor homes, and commercial truck and bus tubeless tires over three and a half tons. And this sensor is not intended to be used where vehicle speed exceeds 75 miles per hour.

But that should do it for the review on the replacement of the ball sensor for the Tuson Towable Tire Pressure Monitoring Systems.