Replaces the fan motor for your Ventline models V2045, V2065, V2244, and V2265 exhaust fan.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hey guys, it's Randy here at etrailer.com. Today we're going to be taking a look at a replacement fan motor. Now, this motor's going to be a perfect replacement for the Ventline fans. There are a few different models it's going to work for. You've got the V2045, V2065, V2244, and the V2265.There's nothing worse than when you get out there, you kick on your fan to try to get some exhaust out or maybe bring some fresh air in, and it doesn't come on, or even worse, it comes on, and it's really noisy. Basically this is going to be a perfect solution for that.
Customers have commented on how easy it is to replace, how it's the perfect fit, and they we're really surprised that we had the parts available here, even for older model fans.This is going to be a direct plugin. You can see we've got our two-prong plug there, two-tip plug. It's got little notches on two of the corners there. It's going to help you to ensure that you get it put in the right way, that we're sending the right power to the right side.This is going to be your best bet for getting that fan working. Typically with vent fans mounted on the roof, you've got a lot of screws, self-leveling sealer and Butyl tape that you've got to go through to do a complete replacement.
While it's not a bad idea, getting a new, fresh replacement on there, especially if you've got a little bit of a leak or something like that, I think that's the better route. Replace the whole thing, get it all sealed back up and you'll be starting fresh.If you don't have any leaks and you don't have any cracks or any discoloration in the vent itself, well, this is going to be the way to go. It's going to be a much cheaper alternative. It'll allow you to get that fan back functioning. One of the customers even commented they we're really surprised it was even the right RPM.
So, this is going to be a direct replacement, it's going to be no different than what you currently have in there. It's just going to get that fan back and working. Help get some fresh air cycling through or get that hot air out, so you can draw some fresh air in through the windows. Just overall it's going to add to a better camping experience.This is going to mount in using the original hardware, so definitely hang onto that. You'll pull that out, slide this in, get it mounted.
You'll then plug it in and from that point, the control that already exists there, it's going to work, it's going to operate, and it's going to get you right back up and running.So, overall it could be a quick, easy way to get that fan running, restore that comfort that we've lost without it.
Average Customer Rating: 4.8 out of 5 stars (141 Customer Reviews)
Replaces the fan motor for your Ventline models V2045, V2065, V2244, and V2265 exhaust fan.Had to do several modifications as some dimensions did not match the original model V4022 exhaust fan motor. Now have to replace the fan blades as original blade will no longer open the roof vent. Regardless of wiring fan only blows down into bathroom. Lucky that etrailer handles the upgraded replacements for our 1984 built manufacture red home. Glad I found them!
Replaced two motors for exhaust fans. They work better than before!
I'm 63 it's the coldest day in years, it's a perfect match, 1/2hour in running much quieter than the old one. It been in since 1996 long time!If that's any say about this product.Iwell take 2 last me and my family for life.
Exactally what I needed. Thanks!
Steve - 07/26/2023First time Customer and I have to say... The folks at trailer.com EXCEEDED my expectations TEN FOLD! Entered my order in the evening and it was processed and shipped that same evening and I received it within 3 days using normal ground economy shipping. The fan motor fit and operated perfectly as they said it would! Amazing Service and I would highly recommend etrailer to everyone!
Having the motor of my OLD, OLD bathroom fan finally die put me in panic mode, with dreaded remodeling feared. Thanks to etrailer I got the exact replacement needed. Had to snip off the fancy new plugin attachment and direct wire it in, but hey, I’m familiar with wing nuts by now. Fortunately, I’ve also learned to take photos before removing the broken parts, so installation was a snap. Thanks, etrailer.
Motor worked well. It was a quick and moderately easy install. The client was happy. The only thing I might have liked to be different was if there were longer electric leads on the motor. The fan/light it was going into did not have a plug in connection. It needed to be hard-wired and there wasn't a lot of wire to connect to once I got it routed into the internal junction box. Just would have made it a little bit easier.
The fan motor is great. Installation is very easy and is economical than replacing the entire unit. Operates smooth and quiet. I recently purchased it for a client who is extremely particular he was so pleased he now wants a second one!
Had to replace two fan motors in my mobile home. These were perfect match! Shipping was fast! Thank you!!!
This was a perfect fit. There was no plugin so I had to wire nut. Product came in 3 days with standard delivery. Looked elsewhere but this was the only site that had the exact product. Business done right.
Michael B - 09/08/2020Exact fit for my bathroom, very easy installation and very reasonably priced
Ordered this motor to replace one in a 30 year old Ventline V2245 bathroom exhaust fan and it installed easily and works great. There was a slight delay in shipping (not the fault of etrailers) but it still arrived in a few weeks and they were very efficient with communication keeping me updated. Will use them again.
Caryl - 03/01/2019I have an older style Ventline model. 2045 and was surprised I can still get parts.
So I ordered 2 motors and 2 fan blades.
Shipping was fast and found the parts to be exactly like the old ones. installation was fast and motors worked perfectly, even the right RPM.
Casey - 10/17/2019fit right in and reinstalled the fan and light and all working well. glad you knew which part i needed. tanks
The fan and fan blade were a perfect match for what was installed as original equipment in our bath. These products were not available at any local store in our area. The installation was easy as there wasn't nay difference between the old and new. Everything went together as designed. We look forward to many years of service from these products. Thank You!
OLWYN W - 07/31/2021Perfect replacement for an old fan, was glad to find one!!
Great price and quality parts. Arrived on time and no damage. I've used etrailer.com before and I will use them again.
Installed and works as it should, wiring could be slightly longer as the housing/mounting area has no plug like the motor. Had to cut plug and wire direct just like original motor.
Dan - 01/25/2020Exactly what I needed! Easy to find and navigate website and fast shipping! Thank you!
Exact replacement. Works great. Superfast shipping. Replied to order within minutes and shipped same day, received within 2 days using priority mail. Like the tracking with map. Very pleased. Will order again.
Robert F - 04/13/2019Fit perfect, exact replacement. Works g reat.
After one year the ventline fan motor is still working. This was my second one I purchased because the first got burned out from rain water coming down my exhaust pipe. I now have a cap on the pipe. Hopefully, I will not have to purchase another one but I hope if I do you still carry the item. I was worried no one would have such an item as my double wide trailer is 26 yrs old, things become obsolete with age. Thanks for having the item.
It fit perfectly in our vent and work great with no special wiring it was a plug and play fit
I will definitely use them again
I am giving the company a 5 star rating but the product is greatly overpriced. After receiving the replacement motors I realized it is the exact same motor that Broan uses for the cheap 50 CFM bath fan. With the trim kit and grill I only paid $15. I cut the connector off the old motor and used butt splices to connect the white connector to the new motor . You might have to change the rotation of the motor but that is simple to do. Additionally, etrailer was very easy to work with and I dont have any complaints with the ordering and receiving process. I will use them again in the future just no for the fan motor!
Exactly what I needed to replace a burnt out motor installed almost 30 years ago. Thank you!
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.