Replacement Mini-Rocker Switch for Ventline Ventadome Trailer Roof Vents

See what our Experts say about this Ventline Accessories and Parts

• What Size Hole Does Ventline Switch part # BL0108-00 Fit
  The Ventline switch part # BL0108-00 that you referenced is designed to fit a rectangle hole that measures 3/4 inch by 1/2 inch. You'd want to measure the size of the hole that you currently have for switches to determine if this would fit.
  view full answer...
• Replacement Rocker Switch Compatibility with KIB Systems Monitor
  The Replacement Mini-Rocker Switch for Ventline Ventadome Trailer Roof Vents # BL0108-00 is a basic 10 amp switch allowing for a single function. It is designed to fit in a hole that is 3/4 inch by 1/2 inch. If that meets your criteria for your KIB Systems Monitor it should work just fine.
  view full answer...
• Replacement Switch that Can Fit Panel Cutout 1/2 inch by 3/4 inch
  The switch panel dimensions the switch # BL0108-00 is designed to fit measures 3/4 inch by 1/2 inch like the panel you have. This is a standard switch with two spade connectors so it should fit and work well for you.
  view full answer...
• How is Ventline Rocker Switch Replacement Accessed for Removal
  When removing a switch like the part # BL0108-00 from a Ventline roof vent there is a tab on the top and bottom of the switch that needs to be pressed for the switch to be able to be pushed out. You'd have to access it from above if you can't find a way to reach and and grab it from the topside.
  view full answer...
• Replacement Switch for Ventline Roof Vent # V2094
  The correct replacement switch for your Ventline Ventadome Roof Vent V2094 would be the Replacement Rocker Switch # BL0108-00. This is a direct replacement for your old switch.
  view full answer...
• Control Panel Switch Replacement for Aux Battery on 2006 Fleetwood Jamboree
  Assuming that the existing switch that controls the auxiliary battery on this control panel is a 10 amp switch that is 3/4" long x 1/2" wide, the Replacement Rocker Switch # BL0108-00 will work to replace your broken switch. If you have a switch with a different amp rating or size, please let me know what those specs are and I will work to find an alternate recommendation.
  view full answer...
• Replacement Rocker Switch For Ventline Range Hood PR
  For your Ventline Range Hood PR 100 CFM, you can use either use the Replacement Fan Switch for Ventline RV Range Hood # BL1194-00 if you need the large style rocker, or you can use the Replacement Mini-Rocker Switch for Ventline Ventadome Trailer Roof Vents # BL0108-00 if you need the small style rocker. Both of these switches are rated for 10A, 125/250VAC. Unfortunately neither of these switches are available in white
  view full answer...
• Replacement Switch Recommendation for Ventline Range Hood
  Sounds like you are looking for the Ventline replacement switches part # BL0108-00-R which can be used as either a lamp or fan switch on the front panel of a Ventline RV range hood.
  view full answer...
• Recommended Replacement Rocker Switch For Ventline Range Hood
  Thanks for the picture! I have an option but The Replacement Rocker Switch # BL0108-00 is only capable of on-off and will not work for checking the capacity of your tanks. You will need the Mini-Momentary Switch # 37213725 which will fit the same 3/4"x1/2" switch cutout opening but is designed for the on-off-on function you are looking for.
  view full answer...
  
• Ventline Replacement Motor and Light Switch For Range Hood Vent
  The replacement switch is part # BL0108-00-R as long as your Ventline Range Hood is considered B or T Series. If your Range Hood is the S0721 series then you need the light switch part # BL0108-01. It sounds like you may be referring to a ew motor for your Ventline Range Hood Fan as well. I recommend part # BVD0278-00 for the PH 100 cfm Ventline Range Hood. I have attached a photo of each series fan for your comparison.
  view full answer...
  
• Replacement Ventline Model PR 100 cfm Fan Motor and Switch
  The Replacement Fan Motor # BVD0278-00 and Mini-Rocker Switch # BL0108-00 will fit the Ventline PR Range Vent. Being as both the fan and light stopped working at the same time I recommend checking to verify you have power coming into the range vent and do not have another issue which is preventing them from working.
  view full answer...
• Replacing Switch on Ventline Trailer Roof Vent
  Most likely the wires are soldered to the existing switch # BL0108-00 on your Ventline Roof Vent. To remove the wires you can either use a soldering iron like # PTW2000 on the wiring just enough that you can pull them free or if there is enough extra wiring you can simply cut them and reconnect them to the new switch after stripping the new ends.
  view full answer...
• On/Off Switch for a KiB Services Panel
  The Ventline # BL0108-00 switch you referred to is very similar but fits a cut out hole measuring 3/4" X 1/2" instead of the 1" X 1/2" sizing that you want. The closest items we carry are, JR Products # 37212595 uses 1-1/8" X 1/2" cut out (very close) JR Products # 37213405 uses 1.125" X 0.55" cut out (not as close)
  view full answer...
• Replacement Motor and Switch for Ventline Range Hood PH100CFM
  For the PH100CFM the correct replacement motor is the part # BVD0278-00 and for the switch # BL0108-00.
  view full answer...
• Vent Hood Replacement Light Switch for Ventline Range Hood
  If you have power to the light switch and a new bulb that would indicate it's an issue with the switch which we can help with. For that you'd just need the # BL0108-00-R and you'd be set.
  view full answer...
• How to Hardwire the MaxxFan Deluxe Roof Vent w/ 12V Fan Part # MA00-07500K
  In order to determine if the wires for a vent fan are already ran in your 2018 Flagstaff Ultralight 29RKWS, you would need to obtain the VIN and contact the trailer manufacturer as we would not have this information. However, if you do not already have pre-existing wires to attach the MaxxFan Deluxe Roof Vent w/ 12V Fan part # MA00-07500K to then this will not be a big deal as there are only two wires on the fan that need to be installed. This is the white wire for the ground and the black...
  view full answer...
• How To Wire A Powered Roof Vent In An Area That Doesn't Have Pre-Existing Wiring
  It is possible that the wires are already ran and you won't have to worry about running wire, it's worth looking into before committing to running wires; the best way to obtain this information is to get your VIN number, and contact the trailer manufacturer. If it turns out that your trailer isn't pre-rigged, then you can use a 12v power source like a battery, and run a black wire for your power and a white wire for your ground to your MaxxFan Deluxe # MA00-07500K. The black wire must...
  view full answer...
• How Does the LED RV Interior Light # ILL31CB Turn On and Off
  The LED RV Interior Light, # ILL31CB, would have to be wired to a switch to turn off an on. If the old lights were wired to a separate switch, like on the wall, this light would wire in the same way. If you needed a switch, you could use something like # BL0108-00. Power from the trailer would go in to a terminal on the switch and the power wire to the light would also connect to the switch.
  view full answer...
• Does the Replacement Screen # BVC0573-31 Have a Knockout for Installing a Fan Switch
  As long as your existing vent is part # V2092, V2110, V2094 or V2119, the replacement screen you mentioned would work great for you. As you can see in the photo I edited for you, the screen frame does feature a knockout that can be removed so that the switch like part # BL0108-00 may be installed.
  view full answer...
  
• Finding A Momentary Switch For Generator
  We have a few momentary switches that may work for you, but it is hard to match up completely to your application without knowing how many terminals are on your old switch. If you have 3 terminals then perhaps the Mini-Momentary Switch - On/Off/On # 37213725 or Momentary Switch- On/Off/On # 37212675 would work for you. The # 37213725 switch is rated for 16 amps at 125V AC, 1/3 hp, and 10 amps at 250V AC, 1/2 hp. The # 37212675 switch is rated for 13 amps at 125V AC, 10 amps at 250V AC,...
  view full answer...
• Replacement Switch for RV Oval Porch and Utility Light with Switch # RVPL7C
  We do have a switch that may work for you though it is not an exact replacement for the one on # RVPL7C. Take a look at the mini-rocker switch, # BL0108-00. This is a simple on/off switch like the one on the light.
  view full answer...
• Can Hopkins Backup Sensor System # HM60100VA Be Mounted in Front on Kia Optima and Run Off a Switch
  The way the Hopkins Backup Sensor System, # HM60100VA, works as that when there is power applied to it, the sensors will begin trying to sense any obstructions. This ideal for the rear of the vehicle because it is meant to be attached to the reverse light circuit. You could wire it into a 12 volt ignition source (power that is only active with the vehicle running) and have it on a switch like # BL0108-00. You would need to wire the power wire from the systems to the switch and then have...
  view full answer...
• Replacement RV Fan Motor Recommendation for Motor with MC385MG VD218 Written On It
  Motor # BVD0218-00 would be the correct replacement for what you have. The motor comes with new wires, a bracket, and hardware. If you needed the fan blade you would also want the part # BVD0215-00 and for the switch part # BL0108-00.
  view full answer...
• Replacement Switch, Motor, and Fan Blade for a Venltine V2094 Roof Vent
  I got you covered, for your Ventline V2094 Roof Vent you'll need: -The Replacement Fan Blade for Ventline Ventadome Trailer Roof Vents # BVD0215-00 for the replacement fan blade, -The Replacement 12V DC Motor for Ventline, Ventadome, and Vanair Fans # BVD0218-00 for the replacement motor, & -The Replacement Mini-Rocker Switch for Ventline Ventadome Trailer Roof Vents # BL0108-00 for the replacement switch.
  view full answer...

Do you have a question about this Accessories and Part?