Replaces a lost or broken operator and knob on your Ventline Ventadome RV roof vent for motor homes and enclosed trailers. Properly sized mounting screw is included.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at the Ventline replacement operator knob and screw, part number BVD0462-00. If your operator arm is no longer working, there's no need to replace the entire assembly. You can just replace the arm and knob. This is going to be a direct replacement for the operator arm and knob on your Ventline Ventadome, model numbers, V2092, V2094, 2119, and V2128. Since the V2119 is electric, the knob is not needed. This kit comes with everything you need to replace it. All you'll need is a Phillip's head screw driver.
I've got a Ventadome right here. Let's go ahead and show you how to do that. From the inside of your RV looking up, this is what you'll see. You'll first need to remove the screen. We've got these tabs that we'll just need to push in, and then it should come right on off.
Work our way around. We'll set that aside, and then we can remove our knob, so we'll take our Phillip's head screw driver. Once we've got the screw loose, we can just take the knob off. It just pops on off. Then we can remove the tray here. Now, on each end here, all we need to do is just push towards the center, and it pops right on off.
It's just held in place by some teeth on either side. Now you can either disconnect your wiring or leave it. We're going to set the tray aside. With our wiring and tray out of the way, let's go ahead and grab our Phillip's head screw driver again and start removing the arm assembly here. We'll just take out the two screws. Then, with both screws out, we can just lift it up and start pulling it out.
The slider's going to slide off the dome itself and then we can just pull it through. For our new operator arm, we're going to be reusing the mounting screws from our old arm. What we're going to do is we're going to insert the arm here into the opening here. I'm going to put it in there sideways and then push it through. I'm going to make sure that the slider catches on the slide of our dome just like that, and we'll finish putting it in place, then we'll reattach our screws. Before we tighten down one, let's go ahead and get the other one started. Get them nice and snug. With our tray wiring and screen back in place, we can go ahead and take our new knob and screw, we'll line it up with the grooves on the gear here, push it in place, and then tighten up our screw. Now we can test it out. Works perfectly. That's going to complete our look at the Ventline replacement operator knob and screw, part number BVD0462-00.
Average Customer Rating: 4.9 out of 5 stars (130 Customer Reviews)
Replaces a lost or broken operator and knob on your Ventline Ventadome RV roof vent for motor homes and enclosed trailers. Properly sized mounting screw is included.It was identical to the original, when right in to place. Was a lot easier and cheaper than replacing the whole vent
George at etrailer was so helpful in directing us to the right replacement part, part fit just as recommended and video was extremely helpful.
Direct replacement for original.
Great service. Fast, efficient and affordable. Got my hot dog trailer up, running and venting. Thanks
Good product. Easy install.
Replaced my old 1998 vent screw and works way better than the old one.
The right part for the right price.
I have previously bought from etrailer.com and loved the product (an RV electric brake controller), the service, and especially the information provided on the site; all three aspects were excellent. I bought this section of RV fan because I looked up the specific section for the model of RV ventilation fan unit. Etrailer had that section cross referenced with the model of the unit, so it made it easy to find from a Google search. I ensured it was the right piece and I bought it. It works beautifully. Thank you for making my life a bit easier, etrailer.com. You have a loyal customer, who would recommend you to my priest, my father, my kids, and my best friend.
etrailer.com had the perfect replacement part I was looking for. Their web site was very easy to navigate, and their customer service was outstanding! The only issue that I had was a shipping mistake, which was 100% my fault. When I called for assistance, Brittany quickly and professionally resolved the problem, and my part arrived in just a couple of days. You've got a very satisfied customer that is going to share my experience with friends and family. Thank you Brittany!
Etrailer, Finally had the opportunity to r&r the vent cover, gasket, operator in full bath on motorhome. Everything went well. The old cover closed flat, without any pressure from the operator. The new needed help from the operator to close 100% and lie flat. I wrote that off due to new gasket.
Thanks for sending it out so quickly. It fit perfectly.
Good, solid construction and exactly what I needed to get my roof vent working again.
The product did arrive before its scheduled delivery the post office had a issue finding the label with my name and address got that takin care of I ordered the wrong vent cover was looking on the site and not seeing the right 1
Every thing we have gotten worked fanta stic!
Excellent service
We got exactly what we ordered. I'd take a picture; but, it's now on top of my husband's camper! We had no idea what kind of trailer roof vent we needed and I happened to have taken a picture of the old one and googled the model # and found your website.
the used camper we bought had the vent just patched up, not working right with the wrong parts. we found the exact replacement parts on etrailer ordered, received, installed myself within 5 days. vent works great now.
The fan parts worked perfectly!! So easy to install, I had everything I needed. I would not hesitate to use Etrailer for parts again. Thanks!!
I received part very quickly. Came packaged very well. Installation took about 40 minutes. No more grinding noise when electrical switch is operated. Thanks guys for the prompt and professional service.
I haven't installed it yet, but it looks like a perfect replacement for my Ventline exhaust fan's gears. My gears started slipping so the lid wouldn't go up or down. I was able to make a temporary repair and ordered this part to have on hand when it fails again. Ordering was quick and easy and it arrived on time.
Product was delivered as described and fix perfectly. We have a 20’ car hauler, not an RV, so used search to find part number based on our vent. Bought two as this failure will eventually happen to our second trailer. Great delivery and communications from eTrailer.com (as usual).
Fast and just what I ordered. But this is not my first time ordering from them. It will definitely not be my last time ordering. Keep up the great jobs
I've been using etrailer.com for years and have always had quality products from them at a great price. This one is no exception. You'll never go wrong shopping at etrailer.com
Took alittle longer than normal to get the product. Other than that all was great.
My horse trailer is 8 years old now and parts are getting harder to find. I called etrailer and they helped me find the part. I was even able to upload a picture to them to show them exactly what I needed. They were really helpful and the part fit perfect.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.