Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Replaces the SpeedKnob and anti-rattle wedge assembly on your Yakima FullSwing, FullTilt, RidgeBack, or SwingDaddy bike rack. Includes the SKS control key needed to change the SKS lock core (sold separately).
Features:
Fits:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at the replacement speed knob and wedge assembly for the Yakima bike racks, part number 8880508. The Yakima replacement speed knob is to be used with the Full Swing, Swing Daddy, Ridgeback and Full Tilt bike racks when their speed knobs are either damaged or the threads at the end are stripped out. It comes with the black knockout here which you're going to remove that and it has the control key to remove the lock core from your previous speed knob to replace it into this one. To get started we'll first remove our wedge piece here by unscrewing it and set it aside now we'll grab our damaged speed knob and start replacing it as well. Now we'll move on to our bike rack and have our Yakima Ridgeback here on our table and the issue with is the thread is stripped out in our wedge. We'll push that off to the side, remove our speed knob as well, now we'll get our new one and start installing it. First since this is a Ridgeback, we'll have to remove this top piece from the wedge. Take our allen tool, unscrew those two allen screws, move onto the one on the inside.
Now we can grab our new wedge and install this piece on top of it. What this piece actually does is it takes up the additional space on our Ridgeback so it'll fit properly in a two inch hitch. If you we're to convert this into an inch and a quarter you would remove this piece again. Finally, our second screw, one last turn to make sure it's nice and tight. Next we'll move onto our lock core switch out here. To remove this plastic cap, we'll take a small flat bladed screwdriver and just pop that out, very easy, and then we'll take our master key here put it into the core and it pulls out like so. Again, very easy.
To place it into our new lock, we'll push it in holding onto the end of the core and pull it out. Now we're ready to install this. We'll take our lock washer and install it on our replacement speed knob here and we'll install it at the end of the shank like so. Then we'll take our wedge and we'll just start to screw it in on the inside. You see the cutout here, you want to make sure that the wedge fits along that area. Here's the end of our speed knob so we'll just match them up, just start threading it in so it catches.
Now we can place it into our vehicle, slide it into our trailer hitch and go by the normal installation procedures for this bike rack. Now we'll go into the end here and tighten down our new knob. As we tighten it down, you'll notice that the shake and play has gone away which means it's working properly. All right, it looks like we're ready to go, we'll lock it into place so it's secure in the vehicle and now we can load up some bikes. There you have it for the replacement speed knob and wedge assembly part number 8880508.
Average Customer Rating: 4.7 out of 5 stars (160 Customer Reviews)
Replaces the SpeedKnob and anti-rattle wedge assembly on your Yakima FullSwing, FullTilt, RidgeBack, or SwingDaddy bike rack. Includes the SKS control key needed to change the SKS lock core (sold separately).Misled. Sure, the ad shows (sold separately) for the lock core down in the description.
However, the image of the key with the lock in the product combined with the owners manual showing that the lock core and keys are indeed part of the package drives this to a 1 star. History shows I’m not the only one. Just include the lock core and keys in the package, as the instructions you sent me show.
This Yakima OEM replacement speedknob arrived ahead of scheduled delivery time. Perfect timing for my 4th of July bike ride! Same price as Yakima's website but with less expensive shipping options. The installation video on their website is the icing on the cake. I will definitely order again from ETrailer!
We love how etraler easy it was to order the part from etrailer and get it quickly.
We have traveled all over the country and love its versatility of the bike rack. But the Yakima SpeedKnob placement could use some redesign. It is designed to be too low - below the Trailer hitch. No matter what vehicle the bike rack is on SpeedKnob wedge will bottom out when backing out of steep driveways or curbs thus damaging the wedge. This is our 2nd replacement in 18 months.
I bought wrong part for my bike rack. When I requested an exchange I got a phone call (!) from etrailer setting up exchange. Now we're back on the trails.
Bravo eTrailer.com! Your video (link below) provided great instructions for installing the Replacement SpeedKnob and Wedge Assembly. I had to unlock the lock before I could remove the lock body from the old assembly.
This part in the construction of the bike rack is difficult to put in properly, therefore quite time-consuming. We try to leave the bike rack on as much as possible because of knowing how this piece Is, when attaching. I am looking for a new bike rack to attach to our vehicle because of this Part.
Was a great replacement. I was concerned that the special key wouldn't work, but it worked as advertised. Replaced it in 5 minutes.
excellent product & speedy delivery - will return to e-trailer for future items.
Order came quickly, packaged well, and exactly as expected. I will use etrailer again for future needs.
Soooo easy and quick. Thank you for the how to video. This was for a swing away!
This is the third time that I have had occasion to use etrailer since I purchased a bike rack for my car a number of years ago. Each time the service is great--the website is easy to use, the goods are reasonably priced and they get to me in just a few days. In this case, I needed a new Speedknob and wedge assembly used to tighten my Yakima Ridgeback bike rack into my hitch (the old one stripped out). I got it quickly and once again, I'm ready for another spring of bike riding.
Fast shipping and spare part was hard to find but available here. Will shop here again!
Your company is absolutely amazing to do business with!
Such professionalism every step of the process!
For those of you looking for a replace wedge assembly for Thule racks this one works on the T2 Pro XT2 with 1.25" hitch. I needed to add a couple washers but otherwise it works great!
Once sorted out, everything works fine. I had to use parts from both old and new speedknob assemblies to make it work. Yakama says nothing about there being two speedknobs, but they are different (length, I think - so I probably used the new head and the old threaded rod/wedge, can't remember exactly). Needed one because the car dealer backed up into a steep bank and rendered the knob useless.
Happy with product, waited a while since out of stock. Didn’t include a lock as detailed in the instruction sheet.
Sierra K.
7/15/2022
Sorry for the confusion. The SKS control key should be included to change the SKS lock core which is sold separately. It is item # Y07202.
Helpful Links
James
7/12/2023
Good, gave bike rack a new chance.
I backed up into a very high curb and broke the knob on my bike rack. All that I needed was a new lockable knob for a Yakima HighLite, 2-bike rack. The only one available for that particular rack comes as part of a Replacement Mast with Anti-Rattle Knob and Adapter Sleeve, I thought that instead I would try the Replacement SpeedKnob and Wedge Assembly and see if it would work. I am pleased to say that it does! I was able to take both apart, the interior knob parts are the same, so I was able to just use the new knob on the old rack and save
Great products and service from etrailer!
Excellent customer service and follow-up. It was a pleasure doing business with your team members. Thank you!
Did exactly what it was supposed to do and he made sure the part I needed was correct for the model bike rack I had. Would def purchase from again.
Always good quality always on time...
i lost a tiny part of this part which is essential for my bike rack. i couldnt find it in seattle. etrailer supplied. and:i camped with my bike last weekend. fabulous trip. thank you etrailer.
I submitted a review previously
Prompt and just what I expected.
This was an exact fit replacement for the existing piece. Relatively easy to replace and has worked fine since.
Excellent service and timely delivery. This bike rack part makes the rack usable again for a fair price.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jim T.
3/11/2018
Great—I just put the bike rack on the car getting ready for the spring and all is fine.