Yakima Same Key System (SKS) Lock Cores (QTY 2)

Ask the Experts about this Yakima Accessories and Parts

• Replacement Key or Lock for Yakima Bike Rack
  As long as the Yakima bike rack is unlocked you can simply get the Yakima Same Key System (SKS) Lock Cores (QTY 2) # Y07202. This comes with the control key that you'll use to remove the lock core(s) and then you have 2 replacement cores and 2 keys. Normally the Yakima bike racks have a cable lock and a lock for the hitch which is why this kit is your best option. If the core is in the locked position then you'll need to have a locksmith come out and help or drill it out yourself as...
  view full answer...
• Solution for Yakima Rack with Lost Keys
  If you cannot remember what the number on your key was then you will need to contact a locksmith to come and drill out the lock for for you since there is no way to determine what they key number you need is unless you wrote it down before you lost it. My contact at Yakima said that the locksmith will need the control key to get the lock core out and you will need one to install the new lock core. After removing the lock you can install a replacement lock core kit like part # Y07202 to...
  view full answer...
• Locking Mechanism for the Yakima Space Cadet Cargo Box
  I have a solution for you, however there is no locking mechanism for the feet themselves. The feet are designed to only be able to be unscrewed from the inside, and a proper installation goes a long way to securing the feet against removal from the outside. If you're looking to replace the locks on the physical box themselves, they are SKS style locks. A new set of 2 locks is available as part # Y07202
  view full answer...
• Can Drilled Out Yakima Lock Core be Replaced
  It's hard to see in the picture if the lock assembly is damaged, but if the housing is okay you could install a new core with the part # Y07202. Seeing the core drilled out like that does warrant some questions though...like was the box stolen? Did he lose the key? You might ask a few questions.
  view full answer...
• Replace Lost Key For Yakima Swingdaddy Bike Rack
  I have a Solution for you. Without the key number you will need to replace the lock core because Yakima offers a large amount of key configurations. This can be done very easily with Yakima's Same Key System Set # Y07202. The "master key" will allow you to remove the lock core and insert a new one. This will only work if your original lock is unlocked. If it is locked you will need to contact your local locksmith to unlock it and then proceed with the Same Key System Set. The replacement...
  view full answer...
• Yakima Buttondown 6 Lock Kit Recommendation
  What you sent in a picture of is a Yakima SKS lock core housing. What you need is just a set of locks like the # Y07202 which comes with a set of two and you'll be able to replace those black plugs with lock cores. This kit comes with everything you'd need. I attached a picture of the install instructions for this kit for you to check out as well. Basically to get the black plug out you'll need to use a key to pry it out like in the instructions picture.
  view full answer...
• Replacement Locks and Keys for Older Yakima Space Case Cargo Carrier
  For your used Yakima Space Case, I recommend the Yakima Same Key System # Y07202. This kit consists of a control key, two lock cylinders and two keys. This kit will allow you to remove the old locks and replace them in one step as long as the locks are unlocked. If you case is locked, then you will need to drill out the cylinder first and then use this kit to replace the locks.
  view full answer...
• Replacement SKS Lock Cores for Older Yakima LockJaw Bike Carriers
  I called my contact at Yakima and they told me the Same Key System, (SKS) will work on your LockJaw bike carriers. We have as many as 12 lock cores in the SKS systems we offer. I have attached a link to the SKS systems we have. For 2 locks you can order part # Y07202.
  view full answer...
• Replacement Lock and Keys for a Yakima Space Cadet 15
  The easiest thing to do from here is to simply order a Yakima Same Key System replacement kit, part # Y07202. This will give you a control key to remove the lock that is currently in the system (as long as it is in the unlocked position) and then insert the new core. It includes keys that are paired to the included lock cores. If you have any additional Yakima products that can lock, this will allow you to add the additional cores to those products and use the same key. There is a 6...
  view full answer...
• Replacement Lock Cores and Housing for a Yakima RocketBox
  You'll need a SKS 2 pack, part # Y07202, which will include two keys and a control key to remove the existing lock cores. Unfortunately, there are not replacement parts available for the lock housing, so you'll need to contact Yakima directly in order to replace that part of the box. If there is part of the original key stuck in the lock, it will need to be drilled out.
  view full answer...
• Locking Mechanism for the Yakima Space Cadet Cargo Box
  Unfortunately there is no lock housing upgrade available for the Yakima SpaceCadet. However, if you have an open locking mechanism (Which would look like a metal cylinder with a plastic plug or just nothing in it) and no lock cylinder, you can purchase a kit to add locks to this housing with part # Y07202 to get two keyed alike cylinders and keys for the box, plus the change key to add them to the box.
  view full answer...
• Replacement Yakima Same Key System Locks for a Yakima RocketBox
  Most Yakima products made after 2009 are compatible with the same key system. To replace the locks, you'll need part # Y07202 which will replace two locks, include two keys for those locks, and includes the removal key that you need to switch your old locks out with your new ones.
  view full answer...
• Solution for Replacing Yakima Key that Broke off In Lock Core
  You would first have to remove the broken key from the lock and use the control key that came with the box to remove the lock core. You can then get the 4-digit number from the side of the lock core and order new keys. If the key is stuck try wiggling the key out using a paperclip along the ridged side of the key. I have had luck in the past using dental picks to work broken keys out of a lock cylinder. If enough of the key stem is protruding from the lock, you could also try grasping...
  view full answer...
• How to Pick Out SKS Locks and Keys to Match Existing Yakima Locks and Keys
  You would have to look at an existing key for its number and then you could order additional keys as needed using that number. So for example if your existing keys are A152 then for a replacement use # Y8772-A152. Or if you are looking for the lock cylinder itself then for an A152 the lock would be # Y8771-A152. So basically for a key it is Y8772-KEY NUMBER and for a lock cylinder it is Y8771-KEY NUMBER.
  view full answer...
• Available Quantities of Yakima SKS Lock Core Kits
  Yakima offers their Same Key System (SKS) lock cores in various quantities. The 2-lock kit is part # Y07202, the 4 lock kit is part # Y07204 and the larger-quantity lock kits are listed below. 6 Cores # Y07206 8 Cores # Y07208 All SKS lock kits include the control key for core installation as well as the lock-specific keys to fit the cores.
  view full answer...
• Are Replacement Latches Available for an Older Yakima Rocket Box
  I do have an option for you but the latches are not available for the older Yakima Rocket Boxes. Therefore, you will need to remove the old lock core. The issue however is that the lock core can only be removed if the lock core is unlocked assuming you don't have the key. If it is locked you will need to drill out the lock core or if you know the key number you can get a key for it based on this. Assuming nothing was damaged after drilling you should be able to replace this with a new lock...
  view full answer...
• Needing Replacement Key for a Yakima Rack
  You will need to get the lock code of the lock cylinder on the Yakima rack. Unfortunately, to do this the lock cylinder has to be removed from the rack. Since you do not have the key to do this, you will most likely have to find a lock smith who can remove the lock cylinder from the rack. If you are planning to reuse the rack, then the number on the side of the cylinder will allow you to get replacement keys. You would go to our site and the key number will be Y8772- ****, like # Y8772-A149....
  view full answer...
• Does the Yakima ButtonDown 6 Ski Carrier Use Yakima SKS Lock Cores
  The Yakima ButtonDown 6 does fit the same Yakima SKS Lock Cores # Y07202 that are still in use.
  view full answer...
• Can Yakima Lock Cores be Ordered With Specific Key Numbers
  There is a way to reuse your existing keys but the Yakima Same Key System (SKS) Lock Cores # Y07202 cannot be ordered to match your keys. What you would need to do is order single lock cores that match your keys. For example, if your key had a number of A150 you would need Replacement SKS Lock Core for Yakima Racks and Carriers - A150 # Y8771-A150 to match that key. To replace just one core at a time you would also need the Replacement Control Key for Yakima Same Key System # Y8007835....
  view full answer...
• Are Adapters Needed to Mount Yakima BigStack Kayak Carrier to Aero Crossbars
  I believe you are asking about the Yakima BigStack Roof Mounted 2-Kayak Carrier System # Y04041. The good news is you don't need any type of adapter in order to mount this to your Yakima aero crossbars. The BigStack carrier will fit these crossbars as-is, without any type of adapter necessary. The only thing I recommend is that you use the Yakima Same Key System (SKS) Lock Cores (QTY 2) # Y07202 to lock the BigStack to your roof rack. If you already have SKS locks on your Yakima roof...
  view full answer...
• 2007 Skybox Pro 16 Key and Lock Core Replacement
  My contact at Yakima confirmed that since your locks are unlocked, you can use lock kit # Y07202 to change out the lock cores in your older Yakima Skybox. This kit includes the control key you'll use to remove the old unlocked cores; it also includes two new cores and two new keys.
  view full answer...
• Lock Cores and Keys for Yakima Promo Ski Mount Carrier
  I spoke with my contact at Yakima regarding your Promo Ski Mount Carrier. She said that as long as your carrier was manufactured after 1993, you can use the Yakima Same Key System (SKS) Lock Cores # Y07202. This kit will include two lock cores and three keyed-alike keys. If your carrier was made prior to 1993 please let me know and I will look into this further to provide you with compatible lock cores.
  view full answer...
• Yakima Key Replacement Solution If Key Number Wasn't Written Down
  If you cannot remember what the number on your key was then you will need to contact a locksmith to come and drill out the lock for for you since there is no way to determine what they key number you need is unless you wrote it down before you lost it. My contact at Yakima said that the locksmith will need the control key to get the lock core out and you will need one to install the new lock core. After removing the lock you can install a replacement lock core kit like part # Y07202 to...
  view full answer...
• What is Included with Yakima Same Key System (SKS) Lock Cores
  The Yakima SKS lock cores, # Y07202, includes the two lock cores, 2 regular keys that match the locks, and a change key to remove/install lock cores. I have included a link to a video that, in part, shows how it all works. The video is on a bike rack but the same process for installing the locks will apply to the cargo box.
  view full answer...
• How to Lock a Kayak to Yakima Mako Aero Saddles and a Roof Rack
  Like you said the Mako saddles can be locked to the crossbars on the vehicle. But, to lock the kayak to the crossbars, you would need to use something like a cable lock, # Y07233. You can then get the saddles and this lock all keyed alike by changing out the lock cylinders using # Y07204. I have included a a link on the lock cylinders for you.
  view full answer...
• Can Yakima Same Key System Lock Cores Be Ordered for a Specific Key
  You sure can order a lock core for a specific key! To order the A138 lock core, you'd order part # Y8771-A138. If you don't already have one, you'll need a control key # Y8007835 to remove the existing core and install the new one.
  view full answer...
• Lock Cores Needed for a Yakima Rack
  We do have replacement lock cores and keyes as well as whole new kits! If you don't already have lock cores then we have kits like part # Y07202 which has 2 cylinders or part # Y07204 which has 4 cylinders depending on how many you need. If you already do have lock cores then all I need from you is the number on the lock cores and I can let you know what the replacement part number is.
  view full answer...