To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This replacement Anchor Plate "A" kit includes eight anchor plates for the Yakima LandingPad 1. Anchor plates are used in conjunction with LandingPad to attach a base rack system to a standard "C" channel roof-rack track.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everybody, Andy here with etrailer.com, and today we're gonna take a brief look at this replacement anchor plate A kit for the Yakima LandingPad 1. Now, this replacement anchor plate A kit includes eight anchor plates for the Yakima LandingPad 1 for control towers, and this kit is also going to work with the discontinued Yakima Locking RailRider 1. Now, I have included the following item numbers for you on your screen for your reference. And as you know, these anchor plates are used in conjunction with the landing pad to attach a base rack system to a standard C channel roof rack track. Now, this kit is going to include eight threaded anchor plates for your LandingPad 1. And let me give you some overall dimensions here.
Looking at the overall length, we are sitting right at 7/8 of an inch. And looking at the width, we're sitting right at 3/4 of an inch wide. And the thickness, we're sitting right at 1/8 of an inch. So again, you're gonna get everything that you see here on the table before me, eight anchor plates. And because these anchor plates are the replacement from Yakima, you can have the confidence that they will work with your LandingPad 1 or your Locking RailRider 1.
Well, that's gonna conclude our brief look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me..
Average Customer Rating: 4.9 out of 5 stars (136 Customer Reviews)
This replacement Anchor Plate "A" kit includes eight anchor plates for the Yakima LandingPad 1. Anchor plates are used in conjunction with LandingPad to attach a base rack system to a standard "C" channel roof-rack track.They work great for the slot channels in your Yakima rack or load bars.
It’s exactly as described. Glad I can still order parts for my older Yakima racks!
If you have the Yakima rails on your truck cap and you go with the Rhino rack cross bar system, you’ll need these. The Rhino rack ones won’t fit in the.
Was as advertised, fast shipping. Not easy to find extra plates for the Landing Pads so was glad etrailer had these plates.
I bought these for use with Thule's XADAPT11 kayak adapter plate, which came with 20x20mm anchor plates that wouldn't fit my Yakima Whispbar rack without cutting the rubber insert. These are slightly thinner and not as wide and can be slide over the rubber to the correct position.
My only complaint; I couldn't find these anywhere in Canada so ordered them here, only to learn they can't ship to Canada due to Thule restrictions. I had them shipped to family in Michigan who then FedEx'd them to me overnight for $70. Sure wish etrailer would be willing to make an exception for this very small accessory.
Fit well in the tracks and function exactly how they should. Fast service and delivery from etrailer.
Will work as a replacement for the plated steel inserts used in the Rino-Racks that have rusted badly in my installation. At half the price and made of stainless steel this one is a winner.
The rectangular nuts fit perfectly in competitor’s cross rails. I wish there was more cross-compatibility between brands. Since auto manufacturer’s can’t seem to get it together to make universal roof mounts following the demise of rain gutters, it’s nice that after-market manufacturers are standardizing some of the basic hardware items.
Etrailer has a surprisingly vast array of inventory, solutions and informed customer representatives. Such a nice thing in this currently crazy world. They have been very helpful.
Parts for the old Yakima railrider are getting harder to find. Thanks, great service too.
Have the Yakima rail system on top the Snug Top shell. The landing pads make the connection to the rack possible and also allow for a quick, a easy and secure R&R of the rack when it is not needed. The caps on the Anchor plates when the rack is removed protect the plates and have not yet lost one to wind or my own doing.
Arrived fast worked great
I have not received this order so please tell me where they are.
Exactly what needed to mount a generic set of crossbars on my 2004 Fleetwood Niagara pop up's factory installed roof rails.
Mike
6/11/2016
Still working perfectly after a year.
quick delivery thanks
Great to do business with!
I bought these anchor plates to upgrade my old Yakima Rack for use on my Trailblazer.
The original anchors are shaped like footballs & don't spread out the clamping force as well as the newer design - 2 contact points with the track verses 4. The old style was easier to install, drop them in the slot, rotate clockwise, and you're done. The new style requires popping the plastic end caps off the track and sliding the anchors in from the end. It is not hard to do on a warm day. I don't like messing with automotive plastics when it's cold, too easy to break stuff.
I wanted to install a solar panel on the roof of my truck camper using the existing Yakima rails. These A nuts worked perfectly.
Larry Q.
12/21/2018
Great
Came on time
Very happy with product
Already on truck!
Note, these will allow you to adapt a Yakima Y01135, Y01127 or Y01126 roof track to hold a Thule Tracker 430 with TK1 fit kit. These are much less expensive than the Thule part 853-2106 (https://www.etrailer.com/Accessories-and-Parts/Thule/853-2106.html) and provide a larger attachment area. The bolts used on the TK1 fit kit (M6) exactly fit these Yakima Anchor pads.
Found parts not readily available. Quick delivery
It worked and they quickly answered my questions.
These are the rectangular washers we needed to attach a gray water hose holder to the Yakima roof rack installed on our T@B 320S Teardrop. It was a chore to find them sold like this and not part of a kit we didn't need. They were quite expensive for what they are, but there is no alternative. It took a while to get them sent to NC, but then, etrailer isn't [online vendor]. At least etrailer had them and we have them now. We are grateful. etrailer has excellent communication and they were sent out promptly. We're just a long way from the warehouse. We will certainly buy from etrailer again.
Used these to put solar panel on Yakima track roof rack on my camper. Worked great. etrailer is service was quick and reliable as always.
Item is exactly what I needed and these are very difficult to find! Also, I live in Hawaii and shipping was extremely high. Etrailer.com was able to work with me to make this a reasonable purchase. It was fairly painless and shipping was fast. I was able to secure my roof rack with my tracks on top of my truck bed topper. Mahalo, etrailer!
Perfect for mounting my Yakima roof rack bases on my Ford Excursion factory roof rails. Good coating that hasn’t shown any rust after going through two Wisconsin winters sitting outside the whole time.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Philip
2/7/2019
after a year the landing pads are still working well and happy to report I have not yet lost the caps .I live in a high desert area with extremes of temperature and uv radiation and the plastic is holding up