Replacement Lock Housing for Yakima Q Tower (QTY 4)

See what our Experts say about this Yakima Accessories and Parts

• Replacement Lock Cores or Housings for Yakima Control Tower Roof Rack Feet
  The Yakima lock housings # Y8870069 are what the lock cores fit into. The lock cores are what the key fits into to actuate the lock. So if you have the lock cores but no housings you would use # Y8870069. But if you need lock cores use # Y07204 for a 4-pack, 2 matching keys, and the control key to install the locks.
  view full answer...
• Replacement Lock Cores And Keys For Yakima Q Tower Lock Housing Y8870069
  Replacement Lock Housing for Yakima Q Tower (QTY 4) # Y8870069 is just the housing for Yakima Q towers that the lock cores go into. If you need the housing and hardware then go with Replacement Hardware Kit for Yakima Q Towers 2007 and Newer # 8880046 which includes the lock core housing, retainer clips and endcaps. If you would like to replace the actual lock cores and keys, then you will want to go with Yakima SKS Lock Cores (QTY 4) # Y07204 which fits all Yakima products such as roof...
  view full answer...
• Replacement Locks and Keys for a Yakima RocketBox
  If your current locks/housings look similar to # Y8870069 then you can add SKS locks to your RocketBox. All you would need is # Y07202 which includes 2 lock cores, 2 keys, and the control key to install the locks.
  view full answer...
• Lock Fasteners that are Compatible with Yakima Replacement Q-Cam Cover Assemblies
  Yes indeed! Lock fasteners # Y8810073 are compatible with Replacement Q-Cam Cover Assembly # Y8810071. If you also need lock housings use # Y8870069. And for a 4-pacl of locks use # Y07204.
  view full answer...
• Yakima SKS Lock Cylinders and Keys
  The Yakima Replacement Lock Housings for Q Towers, # Y8870069, do not include the lock cylinders or keys. For the added lock cylinders and keys, you will need the Yakima Same Key System Lock Cores, # Y07204, to add to the lock housing # Y8870069. These lock cores are keyed the same. Once installed, you will only need one key to lock or unlock each core. The cores will include 2 keys and a master key to allow you to remove and install the lock cores into the lock housings.
  view full answer...
• How to Remove a Yakima SKS Lock Core from the Lock Housing
  This is actually a common issue but it is easily resolved. If the change key comes out but the lock cylinder does not, the first step is to make sure the lock is unlocked. Then insert the change key. You may need to put tension on the key by pushing up or down or to the side while slowly pulling the key back. Once it comes out a little you can grab it and pull it out of the housing. I made a video showing how to do this.
  view full answer...
• What Yakima MightyMounts fit Factory Roof Rack on 2013 Subaru Crosstrek?
  To use Yakima HullyRoller # Y04035 on the factory roof rack of your 2013 Subaru Crosstrek you will need to use the Universal MightyMounts # Y03590. You can secure these mounts with the use of 4 SKS Lock Cores # Y07204 and Lock Housing # Y8870069. You can check out how the lock cores install by taking a look at the video I've linked.
  view full answer...
• How To Remove Plastic Caps From Yakima Q Tower
  To remove the plastic caps you're referring to on the Replacement Lock Housing for Yakima Q Tower # Y8870069, simply take a small flathead, or a standard key, and stick the tool into the open slot on the plastic and push the key down and towards you.
  view full answer...
  
• Does the Replacement Q-Cam Cover Assembly, # Y8810071 Include Lock Housings
  The lock housings are not included with the replacement Q-Cam Cover Assembly, # Y8810071. To add lock housing you would need to use # Y8870069. They come in packs of 4. If you also need locks and keys use # Y07204.
  view full answer...
• Will Universal Mighty Mounts For Yakima Accessories Work For Mako Saddles And HullyRollers
  Yes you will need 2 sets, as a pack of 4 is good for one accessory. Yakima says that Universal MightyMounts # Y03590 will allow most Yakima accessories to be mounted onto an aero or factory crossbar. I did go ahead and confirm with Yakima that it will indeed work for your Hullyrollers and Mako Saddles. It can fit crossbars up to 4" wide and up to 1-1/2" tall. I have attached a demonstration video for this kit. I also recommend adding 4 lock cores to these mounts to deter theft. You will...
  view full answer...
• How Does the Q Clip Attach to the Foot on the Yakima Q Tower Roof Rack on a 2008 Ford Edge
  The parts that you will need to keep your Q clips attached to your roof rack feet are the Lock Housing for Yakima Q Towers, # Y8870069, and the Lock Fasteners, # Y8810073. You do not need to add the SKS lock cores if you do not plan on using them. The lock housing will insert through the Q clip and the roof rack foot to keep them attached and the lock housing is held in place with the lock fastener. I have attached a video showing how to install the lock housing and fasteners at the...
  view full answer...

Do you have a question about this Accessories and Part?