Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Driver's-side electric brake is 12" x 2". Durable friction material provides improved braking and longevity. Dacromet-coated backing plate is supremely corrosion resistant. Fits 14-1/2", 15", 16", and 16-1/2" wheels.
Features:
Specs:
With repeated use of this brake assembly, the brake shoes may move out of alignment, causing less efficient braking performance. To keep the brake shoes aligned and the brake assembly performing correctly, you should perform routine maintenance.
This brake assembly should be adjusted after installation and then as needed for the life of the brake. To adjust the brake, use a brake adjustment screw tool (sold separately) to turn the adjustment gear on the inside of the assembly. Continue to turn the gear until the drum surrounding the brake catches on the brake pads enough so that the hub can no longer be turned easily by hand. Then reverse the gear by about 10 clicks. A properly adjusted brake should drag slightly on the brake drum.
This brake assembly meets the requirements for certification by the Canadian Standards Association (CSA). The CSA creates standards, which when complied with ensure a safe and quality product. This brake assembly underwent extensive testing to measure stopping distances when braking. This brake has also been tested by QAI for braking performance in a complete automotive setup and under real-world conditions to provide the most realistic scenario for the everyday driver.
Each shoe on this brake assembly is lined with automotive-grade friction material for improved stopping performance and longevity. The friction material is fully bonded onto the surface of the brake shoe. This lining is custom-molded for a perfect fit. The edges are tapered to ensure long-lasting performance. This taper, along with the circular grinding that the lining undergoes, helps to prevent cracking and crumbling. This durability helps to prevent mechanical lockup, which can occur when brake shoes are excessively worn or broken.
The friction material is also SAE-N certified, which means that it is an environmentally safe product that complies with California and Washington regulations regarding the composition of brake pads. As a result, this material not only provides high-performance braking that can endure the test of time, but it is also environmentally friendly and safe for use throughout the United States and Canada.
Average Customer Rating: 4.7 out of 5 stars (119 Customer Reviews)
Driver's-side electric brake is 12" x 2". Durable friction material provides improved braking and longevity. Dacromet-coated backing plate is supremely corrosion resistant. Fits 14-1/2", 15", 16", and 16-1/2" wheels.Bolted right up to my Dexter axle, no issues at all with installation. Paint coating appears very nice. This is a very economical way to replace your brakes and magnets.
Great service and quick shipping.
Good fit and stopping just fine now!
I replaced the original brakes, grease seals and bearings on a 2013 3 axle toy hauler because they looked rough and I was preparing for a 4-5 month vacation on the road.
Etrailer is my go-to favorite place.
Good parts, great service
Excellent service
Purchased 4 sets of the brake assemblies to replace my worn out brakes on 7k Dexter axles. Perfect fit. The eTrailer price for the corrosion resistant units was better than I saw for the standard set anywhere else. I would definitely buy again
the corrosion resistant backing plates are just what I was looking for and look to be of excellent quality. If these were available in self-adjust, that would be even better. I would have ordered some extra bolts, but that product is hard to locate while making a purchase. Perhaps a link on the backing plate details to the hardware such as the axle nuts etc. They are there, I saw them while clicking around but could not find them easily. Excellent customer service!
the corrosion resistant backing plates are just what I was looking for and look to be of excellent quality. If these were available in self-adjust, that would be even better. I would have ordered some extra bolts, but that product is hard to locate while making a purchase. Perhaps a link on the backing plate details to the hardware such as the axle nuts etc. They are there, I saw them while clicking around but could not find them easily. Excellent customer service!
Great product, great price, and was shipped in a timely manner. Etrailer is the best online shopping for your trailer and towing needs. I have been very pleased with their products and customer service.
Lightning fast shipping! Emily was very knowledgeable about the trailer brake products I was buying and saved me about $100.00 in the process. etrailer definitely has my business from now on.
Odelia did a GREAT job with helping me as I have never done a electronic break system before... I had NO clue what I was getting myself into. 3 hours after I received the parts the owner picked it up and he had breaks. Mind you I have about 10 to 14 hours into the job. I needed to do it correctly and made sure everything was spotless clean. Every nut was torqued and everything was adjusted to perfection. I run a shop that has 30 to 60 people and I wish Odelia was part of our staff. Odelia was very easy to talk to and very knowledgeable about the product. Please tell Odelia I appreciate on how much she helped a new customer as she was outstanding!!! Parts had GREAT packaging no damage.
Thanks to Ashley D who got me a product in stocked that worked perfectly. Ashley was so very helpful on the phone with my questions. Your video on how to install and adjust was great for a non mechanic
Fit perfect
Brakes were easy to install, though I had never done so before, and appear to be good quality.
Quality seems to be good. We'll see how long the coating holds up - it looks like some parts are just painted with silver versus plated.
Works great
Super fast delivery. Although I have not yet installed them, the look to be well made.
Fits as described
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Aaron
6/13/2022
1 year later and all is good with the brakes, bearings and grease seals I replaced.