bing tracking image
  1. Accessories and Parts
  2. etrailer
  3. Trailer Brakes
  4. Electric Drum Brakes
  5. Brake Assembly
  6. 12 x 2 Inch Drum
Electric Trailer Brake Assembly - Self-Adjusting - 12" - Left Hand - 5,200 lbs to 7,000 lbs

Electric Trailer Brake Assembly - Self-Adjusting - 12" - Left Hand - 5,200 lbs to 7,000 lbs

lowest price pledge
Retail:$65.56
Our Price: $56.01
You Save: 15%
Accessories and Parts
Orders above $99 qualify for Free Shipping
Shipping Weight: 15 lbs
Quantity: 
etrailer Brake Assembly Accessories and Parts - AKEBRK-7L-SA
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Self-adjusting driver-side electric brake is 12" x 2". Brake pads are made of durable friction material for improved braking and longevity. E-coated backing plate resists rust. Fits 14-1/2", 15", 16", 16-1/2" wheels. 1-636-306-4830 to order etrailer accessories and parts part number AKEBRK-7L-SA or order online at etrailer.com. Free expert support on all etrailer products. Guaranteed Lowest Price and Fastest Shipping for Electric Trailer Brake Assembly - Self-Adjusting - 12" - Left Hand - 5,200 lbs to 7,000 lbs. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (1302)
  • Q & A (0)
  • Photos
  • Why etrailer?

etrailer Accessories and Parts

  • Trailer Brakes
  • Electric Drum Brakes
  • Brake Assembly
  • 12 x 2 Inch Drum
  • etrailer
  • LH
  • Self Adjust
  • 5200 - 7000 lbs

Self-adjusting driver-side electric brake is 12" x 2". Brake pads are made of durable friction material for improved braking and longevity. E-coated backing plate resists rust. Fits 14-1/2", 15", 16", 16-1/2" wheels.


Features:

  • Electric brakes are easier to install and offer more user control than hydraulic brakes
    • Requires only an electric brake controller (sold separately) - no actuator or hydraulic lines necessary
  • Automotive-grade friction material is molded to brake shoes
    • Pads are fully bonded - not riveted - to shoes for long life and more braking torque
    • Less chance of cracking and crumbling that can lead to mechanical lockup, thanks to tapered edge and circular grinding
  • Self-adjusting brake does not require periodic manual adjustment like standard brakes
    • Fine-tooth brake adjustment gear allows for a more precise setting
  • E-coated backing plate resists wear and corrosion
  • Adjuster plugs (included) cover access holes to keep dirt and grime out of the assembly and off of the shoes
  • Mounting bolts and hardware (BRKH12S) sold separately
  • QAI and CSA certified


Specs:

  • Application: most standard hub-and-drum assemblies, including Dexter, Lippert (LCI), and AL-KO
  • Configuration: left hand (driver's side)
  • Dimensions: 12" diameter x 2" wide
  • Mounting flange bolt pattern: 5 bolt
  • Wheel size: 14-1/2", 15", 16", and 16-1/2"
  • Axle rating: 5,200 lbs, 6,000 lbs, and 7,000 lbs
  • Limited 1-year warranty


Self-Adjusting Brake Doesn't Require Routine Adjustment

Standard electric brake assemblies require manual adjustment of the brake shoes over time to provide longer-lasting and more efficient braking performance. With self-adjusting brakes, the brake shoes are always properly aligned, so there's no need to manually adjust the brakes after the initial adjustment. As a result, you get optimum performance without having to take the time to continually perform this type of maintenance.


Thoroughly Tested for Safety

This brake assembly meets the requirements for certification by the Canadian Standards Association (CSA). The CSA creates standards, which when complied with ensure a safe and quality product. This brake assembly underwent extensive testing to measure stopping distances when braking. This brake has also been tested by QAI for braking performance in a complete automotive setup and under real-world conditions to provide the most realistic scenario for the everyday driver.


Automotive-Grade Friction Material

Each shoe on this brake assembly is lined with automotive-grade friction material for improved stopping performance and longevity. The friction material is fully bonded onto the surface of the brake shoe. This lining is custom-molded for a perfect fit. The edges are tapered to ensure long-lasting performance. This taper, along with the circular grinding that the lining undergoes, helps to prevent cracking and crumbling. This durability helps to prevent mechanical lockup, which can occur when brake shoes are excessively worn or broken.


The friction material is also SAE-N certified, which means that it is an environmentally safe product that complies with California and Washington regulations regarding the composition of brake pads. As a result, this material not only provides high-performance braking that can endure the test of time, but it is also environmentally friendly and safe for use throughout the United States and Canada.



12-803 AxleTek 12" x 2" LH Self-Adjusting Electric Brake Assembly - Drivers Side - 5.2K, 6.0K, 7.0K Axles

Compare to Dexter 7K Brake Assembly 23-464 and Dexter 6K Brake Assembly 23-458

Item # AKEBRK-7L-SA






Customer Reviews

Electric Trailer Brake Assembly - Self-Adjusting - 12" - Left Hand - 5,200 lbs to 7,000 lbs - AKEBRK-7L-SA

Average Customer Rating:  4.8 out of 5 stars   (1302 Customer Reviews)

Self-adjusting driver-side electric brake is 12" x 2". Brake pads are made of durable friction material for improved braking and longevity. E-coated backing plate resists rust. Fits 14-1/2", 15", 16", 16-1/2" wheels.

by:

The shipping time was very quick. It was really less expensive and trouble to replace the entire brake assembly than just the shoes.


Comments
No problems! Brakes work perfectly. Always best to replace everything.
Hadley R - 08/18/2022


by:

Once again, the shipping department needs to rethink what they do. This was just tossed in a box with some crumpled paper. It was delivered in a battered box that was broken open at both ends. The assembly had taken a beating. You should order something from [online]. In comparison, a similar product is placed in a box sized to fit the product, has cardboard support on all sides keeping the product from moving inside the box, AND the product is wrapped in bubble wrap. Guess who I am buying product from in the future?


Comments
I will have our Customer Service team reach out to you.
-- Etrailer Expert Jenny N - 05/18/2022


by:

Product was as advertised. Pretty seamless installation.
The only downside was that these are pretty heavy, and the packaging was virtually destroyed in shipment. However, everything seemed to be there in working order, so no harm done.




by:

I purchased the brake assemblies last spring but did not get around to installing on our 5th wheel trailer this past fall. Packaging was sufficient & all parts were there & in place on the backing plates.The install went well, brakes are working good.I looked up online a brake in procedure for the shoe assemblies & followed it which helped out after the install.Overall I'm pleased with the price of the product,the service from etrailer aswell.


Comments
Brake assemblies working great,I like dealing with etrailer.Also good information from reps.
Greg C - 03/09/2021


by:

To team etrailer,
So far,so good. The
complete units were easy to install, although some of the brake assembly units were out of place and had to be reset from shipping and ruff handling. Here are some pictures of the 44 ft pace rig. We have already recommend you to many of our peers. We travel to about 20 events per year and in all kind of traffic conditions, we will let you know how they slow down the unit.
Thanks Al and Matt
Team Hotblade jet dragster




by:

Product arrived quickly, easy to install. I put them on all 4 wheels of our 5 wheel camper. It was cheaper and easier to do it this way than to replace shoes and magnets.




by:

Although trailer is not on the road yet the brakes are a exact match and mounted perfectly.




by:

Our Flat bed trailer can do some pretty heavy work however we do not use this trailer all the time.
When the brakes failed we ordered from etrailer and the parts came in and we installed them without much ado.
Thank you for having all the parts we needed. After a year of seldom but heavy usage the self adjusting brakes are still working splendidly.




by:

They work like advertised and are of good quality, I haven't had them long enough to to know about the self adjusting feature but it looks just like all the rest so I don't know why it wouldn't work. Thanks for getting them to me so quickly.




by:

Thank you George for getting my four Electric Trailer Brake Assembly sent to me on the day I ordered them. Received them sooner than I expected. Very easy installation. thanks again.




by:

I'm probably not the best mechanic that there is but these brake assemblies were very easy to install,it probably took me about an hour per wheel to install,great service from a person named Michelle that helped me to get them shipped quickly,thanks, I would definitely recommend this company for all of your trailer parts....


Comments
Doing just great have only pulled our trailer about 6,000 miles and no problems
Mike S - 09/05/2017


by:

I don't usually do product reviews but wanted to post this one. This was my first purchase from etrailer. I purchased all four brake assemblies for our 5th wheel which I felt was the easiest and best way to go and had my drums machined. It was a very easy transaction, the parts came quickly and fit as they should. Very pleased with the product although I have not put the trailer on the road yet.
BUT- The packaging was very poor. The assemblies were in a carton twice as big as it needed to be without adequate packing and the items rattled around to the point that two shoes were knocked out of place on the backing plates. I was able to correct it and no damage done, this time. Please improve your packaging.
I would definitely buy from etrailer again.



Comments
all good, over 6000 mi and no problems. thanks
Dennis K - 02/22/2018


by:

The brakes on my 2002 Komfort 24-TS trailer were completely shot. I needed to replace the drums (cheaper than having them turned). I also needed to replace the electric brake assemblies and to upgrade them from manual to automatic adjusting. I called etrailer.com a couple of times to make sure I was ordering the rights parts and the phone reps were very helpful and courteous. The parts arrived on time and in good shape. I had everything I needed to complete the job. It took me all day to do all 4 wheels but I saved myself a whopping $1,000 over having the shop do the job.


Comments
Fantastic!
Dave T - 10/02/2017


by:

Good choice in brake assemblies that has been stopping power on our tandem-axle excavator trailer!




by:

1 year in and no issues. They work as e xpected




by:

They fit just like original equipment. Could not imagine doing brakes on a trailer a different way. I don't know how they can sell these brake kits this Cheap !!!!!


Comments
I couldnt be more pleased
Donnie N - 08/08/2017


by:

Bought this backing plate to replace grease soaked brakes on Lippert 2016 7000 lb. axle. Since no one sells just the brake linings, I had to buy the whole assembly. Exact match of the Lippert backing plate. Very easy to replace.


Comments
After about 7000 miles still working good
Mitch - 09/05/2019


by:

Easy to install. Quick delivery. I have not tried it out yet but certain all will be good. Will check out etrailer in the future for related products.




by:

Had two different style tired old units that I rewired only to have brittle old wires break in a different place each time I fixed it. Replaced all four new brakes and now have a trailer that stops, job made easy by getting the correct parts.


Comments
did a complete replacement as mag wires were broken brake linings were worn and manual adjusters were not working. easy job replacing and fixed all the problems at one time . will buy trailer parts from ETrailer in the future.
jim - 09/23/2018


by:

Great customer service over the phone with Noah! My 4400 lb. axle parts were not listed when searching by my trailer but this backing plate was an exact match. Quality product, a very inexpensive way to fix a greasy mess and fast shipping. These guys have customer service figured out!
Thanks!




by:

Product arrived very timely - 3 days from order, that was fantastic. Got my brakes replaced and am now ready for a road trip.




by:

These brake assemblies are cost-effective and work great, and they're easy to install. I replaced all four on my old car trailer and I'm very happy with them. I did an [online] video of my installation.Packing for shipment seemed a little bit marginal, but obviously sufficient as they made the trip undamaged. Note that this purchase was made in June of 2016 (it's now February 2021) so the packing protocol may be different. I'd buy again in a minute.




by:

Bought this system last year in March of 2016, as well as new wheels and hubs, and by Jan of 2017, they noticed when we had it at the factory getting some repairs done, the brakes were already completely gone. We only did 13,000 miles last year after the new system was installed. Had to have all new brakes and rotors put on at the factory, just to be able to get it home. So disappointed they were gone in less than a year.




by:

I was very impressed with this brake assembly, I purchased (2) two for each side of my 5th wheel right and left sides. I have usually purchaced Dexter brand assembly's, Dexters are a lot more expensive. The more I researched these brake assembly's the more I was impressed, in my opinion these are actually a little better brake pads. When I get ready to buy some more for my gooseneck trailers I will definitely by these again for them. Thanks etrailer.
Sorry, I didn't take any pictures, I was leaving on trip the next day that I received them.




by:

Ordered these automatic adjustment brakes they came exactly the day it was promised went together just like they should and now we have a trailer with exultant brakes would certainly recommend this product. Josh K.


Comments
Yes we are happy with the product it has worked so far with out a problem. Thanks
Joshua K - 01/06/2018

25
1302
Show More Reviews

See what our Experts say about this etrailer Accessories and Parts



  • Left Side Self Adjusting Brake Assembly For A 2017 Sportsmen Classic 180tht Single Axle Trailer
    If it feels like the hubs are getting too hot, one item to check is if the spindle nut is too tight and the added stress on the bearings is overheating the bearings and hub that could cause damage to the bearings. I have attached a video of our technician installing a hub on a trailer and how the spindle nut should be tightened to prevent over heating. At the 1 minute and 45 second mark you can see the hub installation. You also will want to try adjusting your brakes since it's possible...
    view full answer...
  • Replacement Braking Assemblies For Dexter 12x2 Brakes
    For your Dexter 12x2" Brakes, you can use the Electric Trailer Brake Kit # AKEBRK-7-SA for the right side, and # AKEBRK-7L-SA for the left side, as a replacement.
    view full answer...
  • Which Nev-R-Adjust Brake Assemblies for Load Trail 14K Dump Trailer
    To determine which brake assemblies would be needed, you will need to measure your existing brake drums as shown in the provided photo. Since your trailer has a 14,000 lb capacity, you most likely have tandem 7,000 lb axles, which typically use a 12x2 inch brake assembly like # AKEBRK-7L-SA for the left hand and # AKEBRK-7R-SA for the right hand assembly. You would also need to ensure that the brake assembly you choose has a bolt pattern that matches the brake mounting flange on your axle....
    view full answer...
    Image 1 for
  • Picking Out Replacement Self Adjusting Brake Assemblies for Northwood Fox Mountain 235RLS
    Based on what you listed so far the most likely solution you need for self-adjusting brake assemblies would be the part # AKEBRK-7L-SA for the left hand side and part # AKEBRK-7R-SA for the right hand side but you should check out your current assemblies first to verify this. Make sure your current assemblies are held on with 5 bolts and that the drum has a 12 inch diameter. If you have something different let me know and I'll get you what you'd need.
    view full answer...
  • Availability of 6k Brake Assembly that Would Possibly Fit Airstream Trailer Made in 60's
    For 6k rated axles you are most likely going to need the part # AKEBRK-7R-SA for the right hand side and part # AKEBRK-7L-SA for the left. You will need to measure your current assemblies and verify the bolt pattern of how it attaches to the axle as well to be sure. The inside of the drum will been to measure 12 inches by 2 inches deep and the assemblies attach to a 5 lug bolt pattern. I attached a help article on installing brakes on a trailer for you to check out as well.
    view full answer...
    Image 1 for
  • Replacement Electric Drum Brakes and Drums for Sundowner Horse Trailer
    We can help you select replacement electric drum brakes for your Sundowner horse trailer. You can usually find an axle's capacity on a sticker or plate on the axle itself. You'll naturally want to choose replacement drum brakes that match that capacity, as well as the diameter and width of the brakes currently on the trailer. Once you find the axle capacity you can then measure your brake drums for their size (please see the linked photo). I checked the Sundowner website but their specs...
    view full answer...
    Image 1 for Image 2 for
  • Do Trailer Brake Assemblies Have to be Replaced in Pairs
    Typically it's best to replace both brake assemblies at the same time since if one is worn out the other probably is but if for some reason one got damaged and the other was still in good shape you could replace them individually. For example for the # AKEBRK-7-SA that you referenced we have the left side with part # AKEBRK-7L-SA and for the right side part # AKEBRK-7R-SA.
    view full answer...
  • How To Determine Correct Braking Assemblies for Tow Master Trailer with Unknown Axle Capacity
    It is not required to know the axle capacity when selecting the correct replacement barking assemblies for a trailer axle though it does help. If you want to try and determine this you can look for a sticker on the center of the beam or measure the diameter of the beam assuming it is indeed a round axle tube. The smaller 3,500 lb axles usually have a 2-3/8" diameter whereas the larger 5,200 lb and 7,000 lb axles usually have a 3" diameter. That said, if you know the size of your braking...
    view full answer...
  • Troubleshooting Weak Trailer Brakes that Are Adjusted Properly and Have Good Magnets
    Is it possible there's grease in the drum which is causing the brakes to not lock up? If you blew out the inner grease seal or it was leaking at all this is a very likely cause. Otherwise it could be a mechanical problem of the assemblies and would need to be replaced. I attached a page that has all of the brake assemblies we offer for you to check out as well.
    view full answer...
  • Do Hubs/Drums Need to be Replaced When Changing Braking Assemblies
    The Electric Trailer Brake Kit part # AKEBRK-7-SA (part # AKEBRK-7R-SA + part # AKEBRK-7L-SA) will work with pretty much any electric brake controller on the market so there should not be any concern in regards to that aspect. You may however want to do a quick check on the brake controller itself to make sure it is in working order. This can be done by checking for voltage on the blue brake output wire directly behind the brake controller with the manual override engaged. There should...
    view full answer...
  • Replacement Brake Assemblies for Part Number B12EA-21
    The repalcement for your existing B12EA-21 brake would be # AKEBRK-7R-SA for the right side and # AKEBRK-7L-SA for the left or for both as a pair the # AKEBRK-7-SA.
    view full answer...
  • Self Adjusting Electric Brake Assemblies for a 2017 Grand Design Reflection 30 BH 5th Wheel
    I know that has to be frustrating but the prices are determined by an algorithm and not set by someone. This causes price discrepancy's in similar products some times. We have the same brakes sold as a set the etrailer Electric Trailer Brake Kit - Self-Adjusting - 12" - Left and Right Hand Assemblies - 5.2K to 7K item # AKEBRK-7-SA. These currently have a comparable price as the separate left side item # AKEBRK-7L-SA and right side item # AKEBRK-7R-SA.
    view full answer...
  • Replacement Self Adjusting Brake Assemblies For B12EA-21
    It is generally easier to replace the brake assembly than try to replace just the backing plate. The B12Ea-21 is the Electric Trailer Brake Assembly # AKEBRK-7L-SA. We also carry the Right Side Assembly # AKEBRK-7R-SA or you can get the Kit # AKEBRK-7-SA.
    view full answer...
  • Routing Trailer Brake Magnet Wiring to Avoid Abrasion from Moving Parts
    The Electric Trailer Brake Assembly # AKEBRK-7L-SA and similar electric drum brakes like the 10-inch # AKEBRK-35L-SA should have their two magnet wires already routed through the backing plate. This is shown in the linked photo. If you are installing replacement magnets in your brakes you'll want to take care to route those magnet wires so that they do not get pinched by any moving parts. The protective sleeve on the magnet end of the wiring helps protect it from abrasion from the actuating...
    view full answer...
    Image 1 for
  • Can Trailer Brake Assemblies be Mounted Upside Down
    Your trailer brakes will still work with the assemblies mounted upside down where the magnet is above the spindle, but from the customers we know who have done this we have found that the stopping power won't be as strong as if they were mounted the right way. The best solution you have would be to go with self adjusting brakes so that you could mount them the right way and they wouldn't require you to be able to access the back of the assembly. For ones that are the same size as your...
    view full answer...
  • How to Determine Trailer Capacity using a VIN, Bearing Numbers, or Axle Diameter
    It is possible that the local DMV or license bureau has the information on the trailer so you will need to call them and see if they do have that information. If they do not there are other ways to determine axle capacity. You can ask the seller for the inner and outer bearing numbers stamped into the metal of the bearings. With those numbers I can determine the likely capacity. Another method is to measure the axle diameter if it is a round axle (if its a square axle I would have to...
    view full answer...
  • Where To Connect Two White Wires From Brakes on Trailer Axle
    If you are referring to two white wires from the brake magnet that are coming from the rear of each electric brake assembly, then it would not matter which wire is connected to ground and which wire is used for the brake feed. The magnet that operates the electric brakes does not require the wires to be specific. I am including a link to a video review of a electric brake assembly that will show the two wires from the magnet. If you are blowing fuses you will want to check the complete...
    view full answer...
  • How to Determine the Correct Replacement Hubs for a 3500 lb Torsion Axle Trailer Without Brakes
    Many states now require trailers to have brakes. Before selecting different hubs for your trailer, I would recommend checking with your local laws and regulations to verify whether you need brakes or not. If you find that you do not need brakes, then you could simply replace your hub with an idler hub. When choosing a replacement hub it is important to keep a few things in mind. The easiest factors to consider are the bolt pattern of the hub, your wheel size and your axle capacity. I...
    view full answer...
    Image 1 for
  • Does the Magnet Get Lubricated when Installing an Electric Trailer Brake Assembly
    You do not grease the magnet or where it touches the hub (armature surface). Grease could end up on the pads or where the pads touch the hub and that will cause all sorts of problems. Components that do need lubrication are already lubricated from the factory on brake assemblies that are applicable.
    view full answer...
  • Do Self-Adjusting Brake Brake Assemblies Require Initial Adjustement
    I would recommend adjusting the brake assemblies upon installation, but after that they should not need adjustment. The brake assemblies will correct their adjustment each time the trailer is backed. To initially adjust the brakes, jack up trailer and secure on adequate capacity jack stands. Follow trailer manufacturers recommendations for lifting and supporting the unit. Check that the wheel and drum rotate freely. Do not lift or support trailer on any part of the axle or the suspension...
    view full answer...
  • How to Determine the Capacity of a Trailer Axle
    The trailer will have a plate or sticker on it that will list the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that will list the weight capacity. You can also tell the weight capacity of the axle by measuring the diameter of the axle. Here is a list that will show the axle weight capacity based on the axle diameter: Typical Axle Diameters Based on Axle Capacity 1,000-lb - 2,000-lb Axles: 1-1/2...
    view full answer...
  • Replacement Brake Assembly for 2016 Grand Design Reflection 303RL
    Since you only have one damaged brake assembly you are totally find to just replace the one with the part # AKEBRK-7L-SA which is self adjusting. Unlike some other trailer components the brake assemblies do not necessarily have to be replaced in pairs or sets. Also, the # AKEBRK-7L-SA is an exact match for what you have as well. I attached the picture you submitted with the assembly info sticker as well as a picture of the # AKEBRK-7L-SA where you can see the same sticker.
    view full answer...
    Image 1 for Image 2 for
  • Measuring Brake Shoe Material & Steel Plate W/ Bonding Combo On Self Adjusting Brakes # AKEBRK-7L-SA
    Electric Trailer Brake Assembly - Self-Adjusting - 12" - Left Hand - 5,200 lbs to 7,000 lbs # AKEBRK-7L-SA I pulled from the warehouse and measured for you. The brake material and the steel plates the showes are bonded to measure 1/4 inch.
    view full answer...
  • Determining Correct Replacement Bearings and Brake Assemblies for 2012 Crossroads Zinger 5th Wheel
    I can certainly help you determine which bearings and brake assemblies are needed to replace the existing components on your 2012 Crossroads RV Zinger 5th Wheel. I wish I knew the correct replacement parts, but I was not able to find that information in my research. The best way to determine the correct bearings and brake assembly for your trailer is to remove the old hub and check for the part numbers on the bearings and brakes. Since you are replacing the bearings, it is also a good...
    view full answer...
    Image 1 for


< Previous
123. . .9



Do you have a question about this Accessories and Part?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality accessories and parts for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate accessories and part information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Jackie C
Expert Research:
Jackie C
Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Jeff D
Installed by:
Jeff D
Employee Dustin K
Video Edited:
Dustin K
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.