bing tracking image
  1. Accessories and Parts
  2. etrailer
  3. Trailer Brakes
  4. Hydraulic Drum Brakes
  5. Brake Assembly
  6. 10 x 2-1/4 Inch Drum
Hydraulic Trailer Brake - Uni-Servo - Dacromet - 10" - Left Hand - 3,500 lbs
etrailer

Hydraulic Trailer Brake - Uni-Servo - Dacromet - 10" - Left Hand - 3,500 lbs

Part Number: AKUBRK-35L-D
In Stock
ChristmasTree SantaHat Arrives before Christmas SantaHat ChristmasTree
$78.68
Accessories and Parts
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
Marine-grade, driver's-side hydraulic drum brake features a single-plunger design. Automotive-grade friction pads are long-lasting. Dacromet-coated backing plate offers superior corrosion resistance. Fits 13" to 15" wheels. 1-800-940-8924 to order etrailer accessories and parts part number AKUBRK-35L-D or order online at etrailer.com. Free expert support on all etrailer products. Great prices and Fastest Shipping for Hydraulic Trailer Brake - Uni-Servo - Dacromet - 10" - Left Hand - 3,500 lbs. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (213)
  • Q & A (0)
  • Videos (2)
  • Photos

etrailer Accessories and Parts - AKUBRK-35L-D

  • Trailer Brakes
  • Hydraulic Drum Brakes
  • Brake Assembly
  • etrailer
  • 10 x 2-1/4 Inch Drum
  • Free Backing
  • Manual Adjust
  • LH
  • 3500 lbs

Marine-grade, driver's-side hydraulic drum brake features a single-plunger design. Automotive-grade friction pads are long-lasting. Dacromet-coated backing plate offers superior corrosion resistance. Fits 13" to 15" wheels.


Features:

  • Marine-grade hydraulic drum brake assembly is great for boat trailers
    • Designed for use with surge-type trailer brake actuators
  • Automotive-grade friction material is molded to brake shoes
    • Pads are fully bonded - not riveted - to shoes for long life and more braking torque
    • Less chance of cracking and crumbling that can lead to mechanical lockup, thanks to tapered edge and circular grinding
  • Periodic manual adjustment required
    • Fine-tooth brake adjustment gear allows for a more precise setting
  • Dacromet coating on backing plate offers superior corrosion resistance
    • Ideal for use on a boat or snowmobile trailer
    • Durable enough for saltwater applications
  • Stainless steel springs are durable and rustproof
  • Aluminum hydraulic cylinder resists rust
  • Single plunger design
  • Adjuster plugs (included) cover access holes to keep dirt and grime out of the assembly and off of the shoes
  • Brake mounting bolts are included
    • Nuts and lock washers (BRKH10BS) sold separately
  • QAI and CSA certified


Specs:

  • Application: most standard hub-and-drum assemblies, including Dexter, Lippert (LCI), and AL-KO
  • Configuration: left hand (driver's side)
  • Dimensions: 10" diameter x 2-1/4" wide
  • Mounting flange bolt pattern: 4 bolt
  • Wheel size: 13", 14", and 15"
  • Axle rating: 3,500 lbs
  • Limited 1-year warranty


This trailer brake assembly acts as part of your trailer's hydraulic braking system. A hydraulic trailer brake actuator is required for this brake to function.


Thoroughly Tested for Safety

This brake assembly meets the requirements for certification by the Canadian Standards Association (CSA). The CSA creates standards, which when complied with ensure a safe and quality product. This brake assembly underwent extensive testing to measure stopping distances when braking. This brake has also been tested by QAI for braking performance in a complete automotive setup and under real-world conditions to provide the most realistic scenario for the everyday driver.


Automotive-Grade Friction Material

Each shoe on this brake assembly is lined with automotive-grade friction material for improved stopping performance and longevity. The friction material is fully bonded onto the surface of the brake shoe. This lining is custom-molded for a perfect fit. The edges are tapered to ensure long-lasting performance. This taper, along with the circular grinding that the lining undergoes, helps to prevent cracking and crumbling. This durability helps to prevent mechanical lockup, which can occur when brake shoes are excessively worn or broken.


The friction material is also SAE-N certified, which means that it is an environmentally safe product that complies with California and Washington regulations regarding the composition of brake pads. As a result, this material not only provides high-performance braking that can endure the test of time, but it is also environmentally friendly and safe for use throughout the United States and Canada.



B10H-63 AxleTek 10" X 2-1/4" LH Hydraulic Brake Assembly - Drivers Side - 3.5K Axles - Dacromet Coat





Video of Hydraulic Trailer Brake - Uni-Servo - Dacromet - 10" - Left Hand - 3,500 lbs

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for All About the Hydraulic Trailer Brake

Today we're going to take a look at the 10 inch uni-servo hydraulic trailer brake assembly for 3,500 pound axles. This is the left hand, driver's side assembly and has the DACROMET finish to it. Now this hydraulic drum brake assembly is designed for use with your surge type trailer brake actuators. This one happens to have the DACROMET coating on it which is used a lot in marine applications and the reason they do that is it provides superior corrosion resistance for freshwater or saltwater use. The uni-servo design is the single plunger design. This type of design will deliver about 20% braking in reverse so it doesn't totally lock up your brakes, it will still give you about 20% braking. Now the size on the braking is always listed as a 10 inch or in this case is a 10 inch my 2 and a quarter inch, and this is the left had driver assembly and basically when they say 10 inch by 2 and a quarter what they are telling you is the 10 inch is the diameter from edge to edge, shoe to shoe.

If we put a ruler on that edge to edge you can see 10 inches and then the 2 and quarter is meaning the width of the shoe, the pad, 2 and a quarter inches, so 10 by 2 quarter inch. This is the left hand side and you can usually see the sticker will say left hand or right hand, but just a little tip by chance if there is no sticker on it and you have to determine what side this would go on. The easiest thing to do is look at the size of the shoe. If you look at this shoe, it's smaller and this shoe is larger. The smaller shoe, which is the primary shoe, that will always face the front of the trailer. If this is the smaller one facing the front of the trailer and puts it in this position you can see that this is the left hand, driver side assembly. Now these brake shoes are lined with an automotive grad friction material, this friction material is fully bonded to the shoe it's not riveted.

Gives you a longer life, more braking torque. Also they taper the edges on the lining and they do a circular grinding on it to prevent cracking and crumbling that can lead to mechanical lock up. This is a manual adjustable break, you can see the gear on here to adjust it. That does mean that it requires periodic manual adjustment. Nice thing on this, is the gear that's used to adjust it is a fine tooth gear and that will allow for more precise setting and there is no break-in period needed for following your initial adjustment. The way you adjust them, you see your gear down here The way to access that when they're installed is you go to the back of the brake assembly and at the very bottom there is two access holes.

What's nice about this, you can see there's rubber plugs in here and the plugs are included with this brake assembly, lot of brake assemblies will just leave open holes and you really don't want to do that because dirt can go up in there and cause problems. These come with the adjuster plugs already in there. To adjust it you just pop out one of these plugs, put your tool through the hole, attach it, fine the gear there. Turn the gear in or out whichever is needed to adjust your breaks. Also just to mention to you, if you notice the mounting bolts they are also included on the brake assembly here so you can see it is designed to fit a four hole brake mounting flange. Now the nuts and the lock washers used to hold this on to the brake mounting flange, those are sold separately on our website.

We do list them on this product page as a related product. Now this whole assembly is certified by USSAE standards and CSA which is the Canadian standards. Again, the size, 10 inch by 2 and a quarter inch. Axle this fits on is 3,500 pound axle and this assembly is designed to use 10 inch brake drums. That should do it for the review of the 10 inch uni-servo hydraulic brake assembly for 3,500 pound axles. This is the left hand, driver's side assembly with the DACROMET finish.

Customer Satisfaction Score:


Customer Reviews

Hydraulic Trailer Brake - Uni-Servo - Dacromet - 10" - Left Hand - 3,500 lbs - AKUBRK-35L-D

Average Customer Rating:  4.7 out of 5 stars   (213 Customer Reviews)

Marine-grade, driver's-side hydraulic drum brake features a single-plunger design. Automotive-grade friction pads are long-lasting. Dacromet-coated backing plate offers superior corrosion resistance. Fits 13" to 15" wheels.

by:

Prompt service is much appreciated. Brakes came nicely packaged to prevent transit damage. Product looks to be be well made but I'm putting them on the shelf. Brakes aren't required so I converted the trailer back to brakeless. With 4 boat ramps within 10 miles brakes aren't worth the hassle. I did use the spindle seal set (15123 Inner Bearing & 1.980t Or 1.938 Bb) which fit perfect.



by:

Great Product and great price



by:

Simple installation and better design on the 4 bolts that attach to the axle plate. I had to reuse the nuts from the old plate but this is a good recycle option. 10 minutes per side to install. Shoes are good quality. I recommend this product.

Jay W. profile picture

Jay W.

8/21/2017

Trailer brakes are working fine. There is a marked improvement in braking power. The trailer stops much sooner now.



by:

I ordered the kit and only the RH showed up. I had a scheduled appointment to have them installed that I missed.



by:

Great product at a great price. Installation is very easy and they perform great. Only leaving 4 stars because they do not come with all the hardware. The locking nuts or nut/locking washer are not included. Adjusting the brakes was very easy as well.



by:

Good product, fit perfect. A year later and the product looks good as new.

Fernando profile picture

Fernando

1/21/2019

All the parts are working great!



by:

Great products, I have had NO problems with them since I bought them over a year ago. Also, the items I bought were priced right! Cheaper to buy online then locally, and Yes, I would buy from etrailer again.



by:

Simple swap out. Make sure that you order new hardware and inspect the master cylinder prior to ordering.



by:

I needed to replace the brake shoes and cylinders on my hydraulic trailer brakes. Replacing the whole unit was a much better and easier way to go. I am happy with the results so far.



by:

I have yet to install the product but I have no doubt as to the quality. The thing that impressed me the most was the free shipping on 200 lbs that arrived in four days from Missouri to Washington state.



by:

Everything went well , was just what I ordered. I just hope that I will be able to bleed them as easily as the install.

Barry S. profile picture

Barry S.

12/17/2017

Everything worked out well, I am pleased.



by:

Good product and price



by:

Can’t say a lot cause I took my boat out 4 times after replacing entire brake system totals about 400 miles still works :)



by:



by:

Great product! Easy ti install!



by:

Arrived fast
Fit perfectly
Works
great
Good deal



by:

Arrived fast
Fit perfectly
Works
great
Good deal



by:

Just installed this today, it bolted right up. Thanks Rick



by:

great for the price.



by:

Great product.
Everything I've ever
ordered has come very quickly and has been great products .



by:

Received product in a day and a half. Normally a three day ship at best. Great company



by:

Good fit . No problems .



by:

Great Products !



by:



by:


25
194
Show More Reviews

See what our Experts say about this etrailer Accessories and Parts

Do you have a question about this Accessories and Part?


Info for this part was:

Employee Michael H
Expert Research:
Michael H
Employee Jeff D
Installed by:
Jeff D
Employee John S
Installed by:
John S
Employee Laura H
Written by:
Laura H
Employee Chris R
Video Edited:
Chris R
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Jacob H
Video by:
Jacob H

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.