Arrives before Christmas 
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Steel caster attaches to a 2" jack inner tube to make it easier to move your trailer. Easily removes for travel. Reduces jack's overall capacity to 1,200 lbs. Zinc finish provides corrosion resistance.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at Removable Caster Wheel Assembly. This is going to provide light support and make it easier to move your trailer. Now, keep it mind that this does reduce the overall jack capacity to 1,200 pounds. The wheel is able to spin, so its got a nice rotating design. That's going to make moving your trailer much easier. It's going to come with the snapper pin, this is included for fast, easy, mounting and removal of the assembly to the jack.
The housing, so this area right here, this is going to be made from a steel construction. It's going to have a really nice clear zinc finish, so it's going to be a highly resistant for rust and corrosion. The wheel is going to be made from a durable steel construction. Nice solid design, the unit design for round jacks with an outer tube diameter of 2 1/4" and then the inner tube diameter needs to be 2". So we can tell that by taking a measurement from inside edge to inside edge, and that's where we're going to get the 2" measurement from. This will fit around trailer jacks that have an inner tube diameter of 2".
The pinhole, this right here, this is going to give us a diameter of 3/8". Then I also took a measurement from the very bottom, the bottom edge right here. The center of the pinhole, and I got a measurement of about 1". The diameter of the wheel is going to measure 5 3/4", and then the width of the wheel, we can get a good look at that as well. That's going to give us a measurement, that also be right around 1 11/16". Now, what i want to do real quick is I actually have a jack.
I want to go ahead and show you how to install. Very simple process, all we're going to need to do is take our jack, place the assembly over the inner tube. Line up the pinholes, and then secure the assembly on to the jack with that included pin. That's all there is to it. That's going to do it for today's look at the Removable Caster Wheel Assembly..
Average Customer Rating: 4.7 out of 5 stars (108 Customer Reviews)
Steel caster attaches to a 2" jack inner tube to make it easier to move your trailer. Easily removes for travel. Reduces jack's overall capacity to 1,200 lbs. Zinc finish provides corrosion resistance.Great addition to my tongue jack. Allows me to easily move my trailer around inside my shop.
Bought this to pair with Item #322-RDJ-2K. It fits perfectly to the jack. The wheel first worked perfectly and made moving my utility trailer super easy. After about a year all the paint fell off and it is now a rusty wheel. Also, even after using grease it does not swivel well anymore. I don't think there are any ball bearings in it. That would keep it fluid.
I purchased the etrailer JC-102 to use a new Wells Cargo Tandem trailer that it came originally with a landing pad, which made it difficult to move around by hand rolling. This 2 1/4" Trailer Jack Removable Steel Castor Wheel is well constructed and a great value. I highly recommend this wheel assembly!
Put this wheel on my 8' MiniGo cargo trailer. Bottom axel height - 8" clearance. Bottom frame height at level is 9.5" clearance. I like the wheel, but certainly won't tow with wheel attached (Audi Q7 tow vehicle). So will have to swap around skid plate (came with the trailer) and wheel when towing. Just something to think about.
Bent and crumbled when empty trailer tongue set back on driveway
This caster is exactly what I was looking for. It fits perfect. Easily to order and easy to make sure it’s the right size. I will order again for any products that I need from etrailer.
I bought the wheel for the new jack I bought from etrailer so I could pull it around the yard with the lawn tractor doing light yard work... gathering cut limbs etc. It works perfect for that. Not having to attach the truck to do yard work is great... and besides the truck cannot go under the trees whereas the lawn tractor can.
I also bought the foot for using the truck.
Just got these today from E-tailer. They came right on time and the support staff; Emily W. was awesome.
I am using these on a hard to load front end snowplow so probably not what most people use them for, but it looks like the jacks will work great.
Thank you, E-tailer.
Put this wheel on my utility trailer to make it easier to move trailer when not connected to truck. I can now move the trailer easily w/o straining my back and or using the truck. It is very easy to connect to the jack and when driving down the road with the trailer I always remove it to give me more clearance between the jack and the ground.
Good product, will make moving trailer easier.
Items look great. Problem is when I was looking for my Jack for dual seadoo trailer your website said it was older and no longer available but this was a replacement and would fit. The otter pole is larger than the original and I noticed that as soon as I compared to two so I unpacked it but did not even try to install it.
The wheel is all metal. I ended up changing the wheel out on this to a plastic one. The metal one was leaving lines in my blacktop.
Who would have figured that?
parts worked just as they should
The plastic wheel will not turn left or right on a smooth hard surface. I do not recommend it. There are better and cheaper ones available
Continues to work well
I put this on my dog trailer. Because this trailer gets pulled in the field and through ditches. It is the only jack I have found that allows me to do this. Not to mention the time saved hooking and unhooking the trailer by half the time screwing the jack up or down. It was a little tight at use and the spring pin was stubborn when finding the hole to snap in. But 5 minutes with a little bit bigger drill bit just to chamfer the pin holes and a dremel tool to knock a little weld slag down and it almost works automatically. Love it.
Easy transaction, no problem or concerns with ordering and receiving. Recommend.
Fits perfect, works great, very durable !!
Worked well to help with moving a utility trailer around on my side parking pad. One thing to note, the wheel is steel, welded together on the surface that rolls on the ground. This caused little lines in my concrete as I rolled it around. Other than that, it does what I wanted it to do.
Bought this to replace a pad on the trailer jack. Went on in 5 minutes, no difficulties at all. The pin fit the original hole that the pad was bolted on to. The removable part is nice as the trailer is low and can scrape the ground at times. Quick and easy. The wheel is metal which I didn't expect but would think that it will make it durable and won't crack and break. Easy installation, easy on and off. Looks to be heavy duty enough to handle the load.
Perfect for my application and excellent product. The only issue I had was the original delivery date was not met and I ended up receiving it 3 days later.
We get great service with a great delivery time.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Kathy
3/16/2021
Great