bing tracking image
  1. Accessories and Parts
  2. etrailer
  3. Camper Jacks
  4. Trailer Jack
  5. Motor and Gear Parts
  6. Gears
Replacement Sidewind Gear Kit for etrailer and Ram Square, Direct Weld Jacks - 10,000 lbs
etrailer

Replacement Sidewind Gear Kit for etrailer and Ram Square, Direct Weld Jacks - 10,000 lbs

Part Number: TJD-12000-GR
$42.13
Accessories and Parts
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Need help with installation?
Locate installers near me
Replaces the gears and roll pins on your etrailer or Ram square, direct-weld trailer jack with a 10,000-lb lift capacity. Designed for TJD-12000 Series jacks. 1-800-940-8924 to order etrailer accessories and parts part number TJD-12000-GR or order online at etrailer.com. Free expert support on all etrailer products. Great prices and Fastest Shipping for Replacement Sidewind Gear Kit for etrailer and Ram Square, Direct Weld Jacks - 10,000 lbs. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (49)
  • Q & A (0)
  • Videos (2)
  • Photos

etrailer Accessories and Parts - TJD-12000-GR

  • Camper Jacks
  • Trailer Jack
  • Motor and Gear Parts
  • Gears
  • etrailer

Replaces the gears and roll pins on your etrailer or Ram square, direct-weld trailer jack with a 10,000-lb lift capacity. Designed for TJD-12000 Series jacks.


Features:

  • Replacement gear kit works with etrailer and Ram square, direct-weld jacks that have a 10,000-lb lift capacity
    • Designed for use with TJD-12000 Series jacks
  • Kit includes 2 gears and 2 roll pins


TJD-12000-GR Replacement Sidewind Gear Kit for Ram Jacks - 12,000 lbs





Video of Replacement Sidewind Gear Kit for etrailer and Ram Square, Direct Weld Jacks - 10,000 lbs

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Rebuilding of an etrailer or Ram Square Jack

Today we're going to be showing you the rebuild process on the large, square-style, weld-on, twelve thousand pound jacks. This is part number TJD-12000SP-F2. Typically these jacks are going to be welded on your trailer. The last thing you want to do is cut them off, grind it down, and weld a new one on. Here at Etrailer we have the full assortment of replacement parts. This in particular is the Ram, brand or the Etrailer brand jack.

A few of the different replacement parts that are available are going to be the cap, that's going to fit on top of the jack, keeps out the moisture, keeps out the dirt. This is part number TJD-12000-CP. We also have the gear kit. This is part number TJD-12000-GR. We've got our bearing replacement. This sits in there and reduces the friction so we don't have all of that weight riding metal on metal.

You can see the inside portion of our bearing spins while the outside portion spins freely. This part number is TJD-12000-BR. We're also going to have the return spring. This is going to draw that drop-leg back up. That's what causes it to spring back up.

This is part number TJD-12000-RSP. Even have the clip for the handle. Now, this is going to come unfinished. These need to be welded on in a location of your choice, however you want to store your handle. This is part number TJD-12000-CLIP. We're going to have the replacement shaft.

This is the handle shaft so our handle can connect on either side here. It's also going to come with the bushings that fit in the side of the jack. This is part number TJD-12000-SHABUS. Lastly, we're going to have the replacement handle. This handle can be mounted on either side. It has the vertical clevis. It's part number is TJD-12000-HD. Now, to remove our cap, we've got the two bolts that hold it in place. There's going to be one here, and catty-corner there'll be another one. Small socket, in our case it's going to be an eight-millimeter we're going to use to remove that. Get that one out of the way and do the same thing for the other one. If it's just the cap you're replacing, at this point you'll grab your new cap, and we'll just thread those bolts right into that same location, but go a little bit further into it. The next thing we're going to do is get our handle removed. Now, you really only need to remove the handle if you plan on replacing it. If you don't plan on replacing it, you can get this shaft out without removal. We're going to show you how to replace it, so it's coming off as well. To do that, use a fourteen millimeter. Now, your bolt's not going to be very tight here. You want it to be able to slide, you want the handle to be able to slide in and out there. It's going to be a washer on each side there. Then the handle, just set it to the side. Now, if we look at the internals of our jack, you can see the smaller gear, it's going to fit on the handle shank, or handle shaft. That larger, the base gear, it's going to sit down on the bottom. Now to see what we're doing here, give you a little bit better look, we're going to get all this grease out of here. You want to be sure you've got some grease on hand during your rebuild, so you can get it replaced with some nice, fresh grease. Doesn't necessarily need to be a high-temp grease, or anything like that. Let's get it all wiped off there. All right, that gives you a good look. You can see right where that pin's going to go through the gear, here. It comes out of the other side. You just need to drive that out. Going to use a punch for that. Small hammer and a flat tip punch is going to be your best bet. You want it to be up on a solid surface, or of course if it's on your trailer it's all ready going to be on a solid surface, you won't have to worry too much about it. Now, once we get that partially started, we don't want to knock it out of there too far, or it's going to get captured in that lower gear. Just want to be sure we've got enough room as we do that, so we can still rotate it. Get in here from the outside, just grab with with a pair of pliers. Just kind of wiggle and pull, and we'll get it pulled out. Now, the pin for the handle is going to be the one that's got the splines in it, and then the other pin that comes with your gear kit's for that base pin, we're going to show you that in just a minute. Now, of course since this is a brand new jack, we're going to be reusing all of the parts that we are going to be removing in the process, but this will give you a step-by-step on how to get yours replaced. Once that pin's out, the handle shaft should be pretty free to move side-to-side. We're going to pull that out, just like that. Your little spacer tube that's there, get it pulled out. Get our gear pulled out, a little recess there, that's going to go towards the outside, so you just want to keep that in mind when you put it back together. With our replacement shaft for the handle, you have these bushings. That just spreads out the amount of area in which we crank that handle on, rather than it just riding on that thin piece of metal on the outer tube of the jack. We'll get both of those popped out of the way. Now, we'll be able to reach in and simply pull out on that larger gear. See, there's a slot in there, you can see the pin. That pin is just a free-floating pin, and the gear keeps it in position, kind of captures that pin in there. This we'll set aside, and that base pin we'll just pull out. At this point, the only two components we haven't seen are going to be the bearing and the return spring. To get to those we have to lift the outer housing for the outer tube of the jack, off of the inner tube, so we'll stand it up. Grab it at the bottom, lift straight up on it. Now you'll see our bearing. That's what reduces that friction and prevents metal-on-metal contact. Now we're going to remove the four lock-nuts. At that point we can lift out our screw. That's going to be what really drives our jack up and down. As we rotate that, that increases the distance between this inner tube and our outer tube which sits on top. As that expands, our jack leg goes down, and those are extremely hard to damage. As long as you keep grease inside of it they should last a lifetime. This typically isn't something that you ever replace, going to be that screw. We'll get that lifted up and out, we can set it aside. Right inside here, we can get the grease off of it, you'll be able to see it a little better. You can see there's a small tab there that our return spring, or that our rebound spring, or drop-leg return spring is connected to, so we want to unhook it right there. We just kind of want to bend that open just a little bit there. Once we open that up a little bit we should be able to use a hook pick, pull up on that spring, it's going to be caught right in there. Now, we are going to be releasing a little bit of spring tension, so as I pop it off of that catch, it's probably going to pop down towards the bottom of the jack. Now that we've got that removed, we'll stand our jack inner leg back up. Now we'll rotate our pin, and then lift it up, and then just engage it in one of those higher holes, that's going to give us access right in here to the bottom where that spring is connected. You'll see right inside here, the spring's going to be connected to a small catch that's on the bottom foot-plate of the jack. Locate exactly which corner of the square tube that that's on. You're going to have a little notch in the bottom of the foot-plate. Once you unhook the end of the spring to it, bring in your new spring, hook it back on, and then we'll lower our jack back down, then we'll want to reattach it at the top. Now, we'll reach back down in there with our pick, or whatever you decide. We want to bring that up and get it reattached into that small hole in our tab on the top. Now we'll get our spring pulled out a little bit here, and we may need to flex that open a little bit more to get it engaged. Then we'll have it reconnected to our tab. Now, with our spring back in place, we can drop our screw assembly back in. We'll want to replace our four lock-nuts. These weren't fully tightened down. We'll just run all of these down until they come to their stopping point. The studs that they stick on are not fully threaded. It gives you a good reference point for where you'll stop. We can slide our bearing back down into place. With that in, now we'll slide the outer tube back over that inner tube. Lay this assembly back down, and we can see where the screw comes out, right there in the middle. Now, we'll take the smooth pin, which is our base pin. It's going to slide through the hole in the screw. We want it about centered. It doesn't have to be perfect but we want it pretty close to centered in that screw. We'll align the groove in our gear up with that pin, and slide it into position. As it seats it should be about flush with the top of the screw. It's not going to be exactly flush, but it should be pretty close. Now, our bushings, these are going to go from the inside out on each side. These, if you need replacements, are going to come with the handle-shaft replacement. We'll bring our handle-shaft and our gear. That gear's going to engage the lower gear there, that's important. Then, our shaft is going to slide right through that. Put our spacer pipe in place. Slide right through that, and then on through. As we slide this in, we just need to line up the hole for our pin in the gear with the hole for our pin in the shank. We'll take the pin that has the grooves in it. We need to get that in to where it's nice and flush. Just like that. We do have grease inaudible 00:13:05. One located here on the bottom, and then one located a little bit lower. You can decide to use those to grease it after you've got it reassembled, or you can take a few minutes now and kind of fill this area in with grease. That way you can visually see it and make sure that you get it fully engaged into the gears. You can see we're right back, nice, operating smoothly. It's time to bring our cap back into position, and replace the bolts that we removed earlier. Your new cap does come with new hardware, so if it's completely missing it's not a big deal. We'll want to get those re-secured, just like that. Then, we can replace our handle. Bring our bolt up through the bottom, or the top, doesn't matter. Make sure that we've got our flat washer on both sides. One there, one here. Then, we're just going to tighten that up enough so that we fully engage that locking portion of the nylon lock-nut. We've got a little bit of slack there still to take out. That's going to be too tight, you want that to be able to slide. We'll back it off just a touch. That's where we'll want it, just to where that handle can slide easily in and out, that way we can tip it down and connect it into our clip, whether we weld that onto our jack, whether we want it on our trailer, wherever we decide to put it. That's going to complete our rebuild of the twelve thousand pound, weld-on jack. I hope this will show you how with just a few parts and a little bit of time, you can rebuild your existing jack rather than having to buy a complete new one, and get it re-welded to the trailer.

Customer Satisfaction Score:


Customer Reviews

Replacement Sidewind Gear Kit for etrailer and Ram Square, Direct Weld Jacks - 10,000 lbs - TJD-12000-GR

Average Customer Rating:  4.8 out of 5 stars   (49 Customer Reviews)

Replaces the gears and roll pins on your etrailer or Ram square, direct-weld trailer jack with a 10,000-lb lift capacity. Designed for TJD-12000 Series jacks.

by:

Haven’t used yet but look like good product. Fast shipping and good customer service



by:

Easy to install and operates smoothly.

Tyler profile picture

Tyler

8/27/2023

Working well. No issues.



by:

The order got here much quicker than expected. The online video of how to repair the landing gear was a great resource to help order the correct parts needed for the rebuild. The rebuild of the landing gear went just as the video instructed. Great job, Thanks!



by:

Product came with all the stuff I ordered tried to install new equipment on the old screw shaft but the older screw was larger diameter then new screw shaft so installed all the new equipment ordered all went well easier fix then installing a new ram jack at a coast of 200 dollars not counting a welder cost. Shipping time was great thanks again



by:

Nicole was very helpful In finding and sending my parts in a very timely manner. Thank you for everyone’s help and nicole also.



by:

I was a perfect fit



by:

These gears were not an exact fit for my application but it turns out now it takes less cranking to height.



by:

Product was good, but the help I got from Gwen was beyond outstanding. She helped me make sure that I ordered the right parts, got them shipped earlier than expected and therefore delivered ahead of schedule, which made my customer happy. She deserves 5 stars!!!



by:

Replacement parts were delivered as stated and corrected my issues with my jack.



by:

I bought these parts and a few others as spares. Nothing but positives for Etrailer.



by:

Parts were exact. Thanks



by:

Horrible service, empty boxes delivered

Katrina B. profile picture
Etrailer Expert

Katrina B.

8/23/2022

I am sorry to hear that you have not received your order. I see that our customer service department is in the process of getting this corrected and sent out to you. Once you received this item, we would love to hear your updated feedback.



by:

Still holding up and operating very well



by:

Perfect fit for replacement



by:

Very pleased



by:



by:



by:



by:



by:



by:



by:

Product is exactly what I ordered.

When
delivery of item was several weeks out, I was contacted about possible substitutes that were available and delivery much sooner. That is great service.



by:

Had what I needed and got it delivered in a reasonable time



by:

Great!



by:

Fast shipping


25
49
Show More Reviews

See what our Experts say about this etrailer Accessories and Parts

  • Replacement Parts For Ram 12K Support Capacity Jack # TJD-12000SP-F2
    Here is a list of the replacement parts we have for the Ram 12K Support Capacity Jack # TJD-12000SP-F2 you found. Replacement Sidewind Crank # TJD-12000-HD Replacement Plunger Pin Assembly # TJD-12000-PPN Replacement Cap # TJD-12000-CP Replacement Return Spring # TJD-12000-RSP Replacement Handle Clip # TJD-12000-CLIP Replacement Handle Shaft # TJD-12000-SHABUS Replacement Rod and Nut # TJD-12000-RODNUT Replacement Bearing # TJD-12000-BR Replacement Sidewind Gear Kit # TJD-12000-GR
    view full answer...
  • Replacement Gear Kit for Ram Jack With 12,000 lb Capacity
    The # BD500212 is specifically made for Bulldog jacks. Based on the 12,000 lb capacity and 10,000 lb lift on your Ram jack it sounds like you have a TJD-12000 series jack like the # TJD-12000SP-F2. The correct gear kit would be the # TJD-12000-GR. If you need additional replacement parts we have the following: -Replacement Sidewind Crank for etrailer and Ram Square, Direct Weld Jacks - 10,000 lbs # TJD-12000-HD -Replacement Handle Shaft for etrailer and Ram Square, Direct Weld Jacks -...
    view full answer...
  • Replacement Parts for etrailer Square Direct Weld Jack
    It sounds like you're talking about the rod and nut on the # TJD-12000SP-R2NH. We have the following replacement parts available: -Replacement Rod and Nut for etrailer and Ram Square, Direct Weld Jacks # TJD-12000-RODNUT -Replacement Sidewind Gear Kit for etrailer and Ram Square, Direct Weld Jacks # TJD-12000-GR -Replacement Return Spring for etrailer and Ram Square, Direct Weld Jacks # TJD-12000-RSP -Replacement Bearing for etrailer and Ram Square Jacks # TJD-12000-BR -Replacement...
    view full answer...
  • Looking For Gears For Trailer Jack On A M101A3 Military Trailer
    Hello James. It sounds like you are looking for a gear kit for the jack on an old M101A3 Military trailer. I am not aware of any gear kits offered for this trailer, so if yours are in need of replacement, your best bet will be to replace the jack entirely. Something like the Square Pipe Mount Swivel Jack w Footplate # TJDP-7000S-B will work well for attaching to the tongue of the trailer. It is rated for 7,000 lbs and has 28-1/2" of total lift.
    view full answer...
  • Replacement Gears for 12,000 lb Leg from Unknown Brand
    The Replacement Gear Kit for Bulldog Sidewind Jacks w/ 12,000-lb Capacity # BD500212 are not a confirmed fit for all 12K legs. I've attached a photo with measurements to help you determine if this gear kit will work for your application. The Replacement Sidewind Gear Kit for etrailer and Ram Square, Direct Weld Jacks # TJD-12000-GR is another option. On this kit the taller gear has an inner diameter of 1-3/4 inches and an outside diameter of 2-1/2 inches. The shorter/wider gear has...
    view full answer...
    Image 1 for Image 2 for
  • Replacement Parts for the Square Direct Weld Jacks
    I went ahead and linked the video you are referencing about rebuilding a square jack like the Square Direct Weld Jack # TJD-12000SP-F2 from our website to this answer. We have a number of replacement parts in that video and some that were not included in the video, I have listed them all for you below. Replacement Cap # TJD-12000-CP Replacement Return Spring # TJD-12000-RSP Replacement Sidewind Gear Kit # TJD-12000-GR Replacement Plunger Pin Assembly # TJD-12000-PPN Replacement Bearing...
    view full answer...
  • Replacement Pins for Ram 12000 Jack
    We have the Replacement Sidewind Gear Kit for etrailer and Ram Square, Direct Weld Jacks # TJD-12000-GR which does include 2 roll pins. This is for the TJD-12000 Series jacks. If that is the jack you have then these will work. If you have a different jack please let me know what jack you have and I can help you locate the correct part you are looking for.
    view full answer...
  • Threaded Rod, Gears, and Pins for Ram Square Sidewind Jack
    For your Ram 10,000 lb jack, it sounds like you will need to rebuild it as the amount of force used most likely damaged the gears and the threaded rod. I recommend the Replacement Rod and Nut for etrailer and Ram Square, Direct Weld Jacks - 12K # TJD-12000-RODNUT along with the Replacement Sidewind Gear Kit for etrailer and Ram Square, Direct Weld Jacks - 10,000 lbs # TJD-12000-GR designed for use with TJD-12000 Series jacks. There is most likely not a clean and easy way to remove the...
    view full answer...
  • Ram Square Jack Replacement Screw Assembly
    We have several replacement parts for the internals of a Ram brand square jack. The Replacement Rod and Nut # TJD-12000-RODNUT will fit the following Ram jacks: # TJD-12000SP-F2 10K Sidewind with 12-3/8 inches of travel w/handle # TJD-12000SP-R2NH 10K Sidewind with 12-1/4 inches of travel w/o handle # TJD-12000SP-R2 10K Sidewind with 12-1/4 inches of travel w/handle Some other replacement parts for these Series jacks are: # TJD-12000-GR Replacement Gear Kit # TJD-12000-BR Replacement...
    view full answer...
    Image 1 for
  • Repair Kit for Ram Series 12000 Trailer Jack
    To repair a Ram Series 12000 jack, like # TJD-12000SP-R2, we have the Gear Kit # TJD-12000-GR or the Replacement Rod and Nut # TJD-12000-RODNUT. Or you could need both. I just depends on what the problem is exactly.
    view full answer...
  • Replacement Gears On Sidewind Jack Installation
    I don't have a diagram on installing the replacement gears like # TJA-2000S-GR or # TJD-12000-GR. I do however have a video to show you how to do it that I have attached.
    view full answer...
  • Replacement Roll Pins And Gears For Ram 10K Trailer Jacks
    For your 10K Ram Jack, you can use the Replacement Sidewind Gear Kit for etrailer and Ram Square, Direct Weld Jacks # TJD-12000-GR to replace the roll pins. This kit also includes 2 gears, and is designed for use with the TJD-12000 series jacks.
    view full answer...
  • Gear Kits for Single Speed Ram or etrailer Jack
    It is not possible for me to tell you with any degree of certainty that you can retrofit the Replacement Gearbox for etrailer and Ram 2-Speed Square Jacks # TJD2SP-12900-GBX for use with a single speed Ram jack though there are replacement gears available. If you have the TJD-12000 Series jacks such as # TJD-12000SP-R2 there is the Replacement Sidewind Gear Kit # TJD-12000-GR as well as Replacement Rod and Nut for etrailer and Ram Square, Direct Weld Jacks # TJD-12000-RODNUT which you...
    view full answer...
  • How to Replace Interior Ram Jack Rod and Nut # TJD-12000-RODNUT on 12000 Series Jacks
    Good news! I was able to get a exploded diagram as well as a set of instructions on how to replace the rod and gears # TJD-12000-RODNUT in the # 12000 Series Ram Jacks made after 2012. I have attached them to this page for your convenience. Basically, you will not need to remove or cut the steel plate inside the top of the jack to do this. You will want to remove the cap, then the roll pin that holds the cross shaft into the leg, this will free up the smaller gear that will be removed...
    view full answer...
    Image 1 for Image 2 for
  • Are Side-Frame Mount Jacks Available With Different Gear Ratios
    For that I recommend an electric jack set like the Ultra-Fab Deluxe Electric Landing Gear Set # UF17-943010 which has a combined 12,000 lbs of capacity, and offers 38" of lift.
    view full answer...
    Image 1 for Image 2 for
  • Availability Of Replacement Gears For Ram 12000lb Sidewind Jack
    I have another option for you, but there is not a complete gear box available for your Ram 12000lb Sidewind Jack. We have the Replacement Sidewind Gear Kit for etrailer and Ram Square, Direct Weld Jacks # TJD-12000-GR which is all of the replacement gears needed to rebuild the jack. The only other option would be to replace the jack using the # TJD2SP-12000SP-F you were looking at. I included videos of the products mentioned for you to take a look at.
    view full answer...
  • Do Nut & Bearing Come Separate For Ram/etrailer 12k Support/10k Lift Square Jack
    The replacement nut and bearing for the Ram/etrailer 12k support/10k lift square jacks are not available separately as they are only packaged together with the shaft: - Replacement Rod and Nut for etrailer and Ram Square, Direct Weld Jacks # TJD-12000-RODNUT As for the roll pins, they are also available, but are come in the package with replacement gears: - Replacement Sidewind Gear Kit # TJD-12000-GR While I know this isn't what you were looking to hear, you will have some extra parts...
    view full answer...

Do you have a question about this Accessories and Part?


Info for this part was:

Employee Jacob T
Video Edited:
Jacob T
Employee Kathleen M
Video by:
Kathleen M
Employee Randy B
Installed by:
Randy B
Employee Andy C
Installed by:
Andy C
Employee Wilson B
Updated by:
Wilson B
Employee Mike S
Updated by:
Mike S
Employee Amanda M
Written by:
Amanda M

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.